This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by GNU gengetopt configure 2.22.6, which was generated by GNU Autoconf 2.69. Invocation command line was $ ./configure --target=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --program-prefix= --program-suffix= --prefix=/mnt/gold/openwrt/lede/staging_dir/host --exec-prefix=/mnt/gold/openwrt/lede/staging_dir/host --sysconfdir=/mnt/gold/openwrt/lede/staging_dir/host/etc --localstatedir=/mnt/gold/openwrt/lede/staging_dir/host/var --sbindir=/mnt/gold/openwrt/lede/staging_dir/host/bin ## --------- ## ## Platform. ## ## --------- ## hostname = anneke uname -m = x86_64 uname -r = 4.19.27-gentoo-r1 uname -s = Linux uname -v = #2 SMP Wed Mar 20 15:16:23 CET 2019 /usr/bin/uname -p = AMD Ryzen 5 1600 Six-Core Processor /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /mnt/gold/openwrt/lede/staging_dir/host/bin PATH: /mnt/gold/openwrt/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.16/bin PATH: /mnt/gold/openwrt/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.16/bin PATH: /mnt/gold/openwrt/lede/staging_dir/host/bin PATH: /mnt/gold/openwrt/lede/staging_dir/toolchain-mips_24kc_gcc-5.4.0_musl-1.1.16/bin PATH: /mnt/gold/openwrt/lede/staging_dir/host/bin PATH: /mnt/gold/openwrt/lede/staging_dir/host/bin PATH: /home/duvi/.nvm/versions/node/v8.9.4/bin PATH: /usr/lib/llvm/6/bin PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /opt/bin PATH: /var/qmail/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2719: checking for a BSD-compatible install configure:2787: result: /usr/bin/install -c configure:2798: checking whether build environment is sane configure:2853: result: yes configure:3004: checking for a thread-safe mkdir -p configure:3043: result: /bin/mkdir -p configure:3051: checking for gawk configure:3067: found /usr/bin/gawk configure:3078: result: gawk configure:3089: checking whether make sets $(MAKE) configure:3111: result: yes configure:3140: checking whether make supports nested variables configure:3157: result: yes configure:3299: checking for x86_64-pc-linux-gnu-gcc configure:3326: result: gcc configure:3595: checking for C compiler version configure:3604: gcc --version >&5 gcc (Gentoo 8.2.0-r6 p1.7) 8.2.0 Copyright (C) 2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3615: $? = 0 configure:3604: gcc -v >&5 Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/8.2.0/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-8.2.0-r6/work/gcc-8.2.0/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/8.2.0 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/8.2.0 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/8.2.0/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/8.2.0/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/include/g++-v8 --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/8.2.0/python --enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 8.2.0-r6 p1.7' --disable-esp --enable-libstdcxx-time --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --enable-libgomp --disable-libmudflap --disable-libssp --disable-libmpx --disable-systemtap --enable-vtable-verify --enable-lto --without-isl --enable-default-pie --enable-default-ssp Thread model: posix gcc version 8.2.0 (Gentoo 8.2.0-r6 p1.7) configure:3615: $? = 0 configure:3604: gcc -V >&5 gcc: error: unrecognized command line option '-V' gcc: fatal error: no input files compilation terminated. configure:3615: $? = 1 configure:3604: gcc -qversion >&5 gcc: error: unrecognized command line option '-qversion'; did you mean '--version'? gcc: fatal error: no input files compilation terminated. configure:3615: $? = 1 configure:3635: checking whether the C compiler works configure:3657: gcc -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:3661: $? = 0 configure:3709: result: yes configure:3712: checking for C compiler default output file name configure:3714: result: a.out configure:3720: checking for suffix of executables configure:3727: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:3731: $? = 0 configure:3753: result: configure:3775: checking whether we are cross compiling configure:3783: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:3787: $? = 0 configure:3794: ./conftest configure:3798: $? = 0 configure:3813: result: no configure:3818: checking for suffix of object files configure:3840: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:3844: $? = 0 configure:3865: result: o configure:3869: checking whether we are using the GNU C compiler configure:3888: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:3888: $? = 0 configure:3897: result: yes configure:3906: checking whether gcc accepts -g configure:3926: gcc -c -g -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:3926: $? = 0 configure:3967: result: yes configure:3984: checking for gcc option to accept ISO C89 configure:4047: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4047: $? = 0 configure:4060: result: none needed configure:4085: checking whether gcc understands -c and -o together configure:4107: gcc -c conftest.c -o conftest2.o configure:4110: $? = 0 configure:4107: gcc -c conftest.c -o conftest2.o configure:4110: $? = 0 configure:4122: result: yes configure:4150: checking for style of include used by make configure:4178: result: GNU configure:4204: checking dependency style of gcc configure:4315: result: gcc3 configure:4334: checking for x86_64-pc-linux-gnu-ranlib configure:4350: found /usr/bin/x86_64-pc-linux-gnu-ranlib configure:4361: result: x86_64-pc-linux-gnu-ranlib configure:4427: checking build system type configure:4441: result: x86_64-pc-linux-gnu configure:4461: checking host system type configure:4474: result: x86_64-pc-linux-gnu configure:4500: checking how to run the C preprocessor configure:4531: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c configure:4531: $? = 0 configure:4545: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:4545: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | /* end confdefs.h. */ | #include configure:4570: result: gcc -E configure:4590: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c configure:4590: $? = 0 configure:4604: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:4604: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | /* end confdefs.h. */ | #include configure:4633: checking for grep that handles long lines and -e configure:4691: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/grep configure:4696: checking for egrep configure:4758: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/grep -E configure:4763: checking for ANSI C header files configure:4783: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4783: $? = 0 configure:4856: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:4856: $? = 0 configure:4856: ./conftest configure:4856: $? = 0 configure:4867: result: yes configure:4880: checking for sys/types.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for sys/stat.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for stdlib.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for string.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for memory.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for strings.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for inttypes.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for stdint.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4880: checking for unistd.h configure:4880: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4880: $? = 0 configure:4880: result: yes configure:4895: checking minix/config.h usability configure:4895: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 conftest.c:54:10: fatal error: minix/config.h: No such file or directory #include ^~~~~~~~~~~~~~~~ compilation terminated. configure:4895: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:4895: result: no configure:4895: checking minix/config.h presence configure:4895: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c conftest.c:21:10: fatal error: minix/config.h: No such file or directory #include ^~~~~~~~~~~~~~~~ compilation terminated. configure:4895: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | #include configure:4895: result: no configure:4895: checking for minix/config.h configure:4895: result: no configure:4924: checking whether it is safe to define __EXTENSIONS__ configure:4942: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:4942: $? = 0 configure:4949: result: yes configure:5011: checking for size_t configure:5011: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:5011: $? = 0 configure:5011: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 conftest.c: In function 'main': conftest.c:62:21: error: expected expression before ')' token if (sizeof ((size_t))) ^ configure:5011: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((size_t))) | return 0; | ; | return 0; | } configure:5011: result: yes configure:5022: checking for long long int configure:5049: result: yes configure:5071: checking for x86_64-pc-linux-gnu-g++ configure:5087: found /usr/bin/x86_64-pc-linux-gnu-g++ configure:5098: result: x86_64-pc-linux-gnu-g++ configure:5169: checking for C++ compiler version configure:5178: x86_64-pc-linux-gnu-g++ --version >&5 x86_64-pc-linux-gnu-g++ (Gentoo 8.2.0-r6 p1.7) 8.2.0 Copyright (C) 2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5189: $? = 0 configure:5178: x86_64-pc-linux-gnu-g++ -v >&5 Using built-in specs. COLLECT_GCC=x86_64-pc-linux-gnu-g++ COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-pc-linux-gnu/8.2.0/lto-wrapper Target: x86_64-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-8.2.0-r6/work/gcc-8.2.0/configure --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/8.2.0 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/8.2.0 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/8.2.0/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/8.2.0/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/include/g++-v8 --with-python-dir=/share/gcc-data/x86_64-pc-linux-gnu/8.2.0/python --enable-languages=c,c++,fortran --enable-obsolete --enable-secureplt --disable-werror --with-system-zlib --enable-nls --without-included-gettext --enable-checking=release --with-bugurl=https://bugs.gentoo.org/ --with-pkgversion='Gentoo 8.2.0-r6 p1.7' --disable-esp --enable-libstdcxx-time --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-multilib --with-multilib-list=m32,m64 --disable-altivec --disable-fixed-point --enable-targets=all --enable-libgomp --disable-libmudflap --disable-libssp --disable-libmpx --disable-systemtap --enable-vtable-verify --enable-lto --without-isl --enable-default-pie --enable-default-ssp Thread model: posix gcc version 8.2.0 (Gentoo 8.2.0-r6 p1.7) configure:5189: $? = 0 configure:5178: x86_64-pc-linux-gnu-g++ -V >&5 x86_64-pc-linux-gnu-g++: error: unrecognized command line option '-V' x86_64-pc-linux-gnu-g++: fatal error: no input files compilation terminated. configure:5189: $? = 1 configure:5178: x86_64-pc-linux-gnu-g++ -qversion >&5 x86_64-pc-linux-gnu-g++: error: unrecognized command line option '-qversion'; did you mean '--version'? x86_64-pc-linux-gnu-g++: fatal error: no input files compilation terminated. configure:5189: $? = 1 configure:5193: checking whether we are using the GNU C++ compiler configure:5212: x86_64-pc-linux-gnu-g++ -c -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp >&5 configure:5212: $? = 0 configure:5221: result: yes configure:5230: checking whether x86_64-pc-linux-gnu-g++ accepts -g configure:5250: x86_64-pc-linux-gnu-g++ -c -g -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp >&5 configure:5250: $? = 0 configure:5291: result: yes configure:5316: checking dependency style of x86_64-pc-linux-gnu-g++ configure:5427: result: gcc3 configure:5500: checking how to print strings configure:5527: result: printf configure:5548: checking for a sed that does not truncate output configure:5612: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/sed configure:5629: checking for fgrep configure:5691: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/grep -F configure:5726: checking for ld used by gcc configure:5793: result: /usr/x86_64-pc-linux-gnu/bin/ld configure:5800: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld configure:5815: result: yes configure:5827: checking for BSD- or MS-compatible name lister (nm) configure:5876: result: /usr/bin/nm -B configure:6006: checking the name lister (/usr/bin/nm -B) interface configure:6013: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:6016: /usr/bin/nm -B "conftest.o" configure:6019: output 0000000000000000 B some_variable configure:6026: result: BSD nm configure:6029: checking whether ln -s works configure:6033: result: yes configure:6041: checking the maximum length of command line arguments configure:6166: result: 1572864 configure:6183: checking whether the shell understands some XSI constructs configure:6193: result: yes configure:6197: checking whether the shell understands "+=" configure:6203: result: yes configure:6238: checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format configure:6278: result: func_convert_file_noop configure:6285: checking how to convert x86_64-pc-linux-gnu file names to toolchain format configure:6305: result: func_convert_file_noop configure:6312: checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files configure:6319: result: -r configure:6353: checking for x86_64-pc-linux-gnu-objdump configure:6369: found /usr/bin/x86_64-pc-linux-gnu-objdump configure:6380: result: x86_64-pc-linux-gnu-objdump configure:6452: checking how to recognize dependent libraries configure:6654: result: pass_all configure:6699: checking for x86_64-pc-linux-gnu-dlltool configure:6729: result: no configure:6739: checking for dlltool configure:6769: result: no configure:6799: checking how to associate runtime and link libraries configure:6826: result: printf %s\n configure:6842: checking for x86_64-pc-linux-gnu-ar configure:6858: found /usr/bin/x86_64-pc-linux-gnu-ar configure:6869: result: x86_64-pc-linux-gnu-ar configure:6950: checking for archiver @FILE support configure:6967: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:6967: $? = 0 configure:6970: x86_64-pc-linux-gnu-ar cru libconftest.a @conftest.lst >&5 configure:6973: $? = 0 configure:6978: x86_64-pc-linux-gnu-ar cru libconftest.a @conftest.lst >&5 x86_64-pc-linux-gnu-ar: conftest.o: No such file or directory configure:6981: $? = 1 configure:6993: result: @ configure:7011: checking for x86_64-pc-linux-gnu-strip configure:7027: found /usr/bin/x86_64-pc-linux-gnu-strip configure:7038: result: x86_64-pc-linux-gnu-strip configure:7110: checking for x86_64-pc-linux-gnu-ranlib configure:7137: result: x86_64-pc-linux-gnu-ranlib configure:7278: checking command to parse /usr/bin/nm -B output from gcc object configure:7397: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:7400: $? = 0 configure:7404: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | sed '/ __gnu_lto/d' \> conftest.nm configure:7407: $? = 0 configure:7473: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c conftstm.o >&5 configure:7476: $? = 0 configure:7514: result: ok configure:7551: checking for sysroot configure:7581: result: no configure:7658: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:7661: $? = 0 configure:7784: checking for x86_64-pc-linux-gnu-mt configure:7814: result: no configure:7824: checking for mt configure:7854: result: no configure:7874: checking if : is a manifest tool configure:7880: : '-?' configure:7888: result: no configure:8517: checking for dlfcn.h configure:8517: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:8517: $? = 0 configure:8517: result: yes configure:8715: checking for objdir configure:8730: result: .libs configure:8996: checking if gcc supports -fno-rtti -fno-exceptions configure:9014: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C configure:9018: $? = 0 configure:9031: result: no configure:9341: checking for gcc option to produce PIC configure:9348: result: -fPIC -DPIC configure:9356: checking if gcc PIC flag -fPIC -DPIC works configure:9374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -fPIC -DPIC -DPIC conftest.c >&5 configure:9378: $? = 0 configure:9391: result: yes configure:9420: checking if gcc static flag -static works configure:9448: result: yes configure:9463: checking if gcc supports -c -o file.o configure:9484: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -o out/conftest2.o conftest.c >&5 configure:9488: $? = 0 configure:9510: result: yes configure:9518: checking if gcc supports -c -o file.o configure:9565: result: yes configure:9598: checking whether the gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries configure:10756: result: yes configure:10793: checking whether -lc should be explicitly linked in configure:10801: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:10804: $? = 0 configure:10819: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /mnt/gold/openwrt/lede/staging_dir/host/bin/grep -lc \>/dev/null 2\>\&1 configure:10822: $? = 0 configure:10836: result: no configure:11001: checking dynamic linker characteristics configure:11515: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib -Wl,-rpath -Wl,/foo conftest.c >&5 configure:11515: $? = 0 configure:11737: result: GNU/Linux ld.so configure:11844: checking how to hardcode library paths into programs configure:11869: result: immediate configure:12409: checking whether stripping libraries is possible configure:12414: result: yes configure:12449: checking if libtool supports shared libraries configure:12451: result: yes configure:12454: checking whether to build shared libraries configure:12475: result: yes configure:12478: checking whether to build static libraries configure:12482: result: yes configure:12505: checking how to run the C++ preprocessor configure:12532: x86_64-pc-linux-gnu-g++ -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp configure:12532: $? = 0 configure:12546: x86_64-pc-linux-gnu-g++ -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp conftest.cpp:29:10: fatal error: ac_nonexistent.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:12546: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | #define HAVE_LONG_LONG 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:12571: result: x86_64-pc-linux-gnu-g++ -E configure:12591: x86_64-pc-linux-gnu-g++ -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp configure:12591: $? = 0 configure:12605: x86_64-pc-linux-gnu-g++ -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp conftest.cpp:29:10: fatal error: ac_nonexistent.h: No such file or directory #include ^~~~~~~~~~~~~~~~~~ compilation terminated. configure:12605: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | #define HAVE_LONG_LONG 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include configure:12774: checking for ld used by x86_64-pc-linux-gnu-g++ configure:12841: result: /usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64 configure:12848: checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) is GNU ld configure:12863: result: yes configure:12918: checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries configure:13922: result: yes configure:13957: x86_64-pc-linux-gnu-g++ -c -g -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp >&5 configure:13960: $? = 0 configure:14480: checking for x86_64-pc-linux-gnu-g++ option to produce PIC configure:14487: result: -fPIC -DPIC configure:14495: checking if x86_64-pc-linux-gnu-g++ PIC flag -fPIC -DPIC works configure:14513: x86_64-pc-linux-gnu-g++ -c -g -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -fPIC -DPIC -DPIC conftest.cpp >&5 configure:14517: $? = 0 configure:14530: result: yes configure:14553: checking if x86_64-pc-linux-gnu-g++ static flag -static works configure:14581: result: yes configure:14593: checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o configure:14614: x86_64-pc-linux-gnu-g++ -c -g -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -o out/conftest2.o conftest.cpp >&5 configure:14618: $? = 0 configure:14640: result: yes configure:14645: checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o configure:14692: result: yes configure:14722: checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries configure:14756: result: yes configure:14899: checking dynamic linker characteristics configure:15569: result: GNU/Linux ld.so configure:15622: checking how to hardcode library paths into programs configure:15647: result: immediate configure:15738: checking whether the compiler implements namespaces configure:15761: x86_64-pc-linux-gnu-g++ -c -g -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp >&5 configure:15761: $? = 0 configure:15775: result: yes configure:15783: checking whether the compiler supports Standard Template Library configure:15812: x86_64-pc-linux-gnu-g++ -c -g -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp >&5 configure:15812: $? = 0 configure:15826: result: yes configure:15835: checking whether the compiler has stringstream configure:15862: x86_64-pc-linux-gnu-g++ -c -g -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.cpp >&5 configure:15862: $? = 0 configure:15876: result: yes configure:15891: checking for bison configure:15907: found /usr/bin/bison configure:15918: result: bison -y configure:15937: checking for flex configure:15953: found /mnt/gold/openwrt/lede/staging_dir/host/bin/flex configure:15964: result: flex configure:16002: flex conftest.l configure:16006: $? = 0 configure:16008: checking lex output file root configure:16022: result: lex.yy configure:16027: checking lex library configure:16041: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /mnt/gold/openwrt/lede/tmp/ccIyvZhG.o: in function `yylex': conftest.c:(.text+0xe4b): undefined reference to `yywrap' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: conftest.c:(.text+0x10d9): undefined reference to `yywrap' /usr/lib/gcc/x86_64-pc-linux-gnu/8.2.0/../../../../x86_64-pc-linux-gnu/bin/ld: /mnt/gold/openwrt/lede/tmp/ccIyvZhG.o: in function `main': conftest.c:(.text.startup+0x9): undefined reference to `yywrap' collect2: error: ld returned 1 exit status configure:16041: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | #define HAVE_LONG_LONG 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_NAMESPACES /**/ | #define HAVE_STL /**/ | #define HAVE_SSTREAM /**/ | /* end confdefs.h. */ | | #line 3 "lex.yy.c" | | #define YY_INT_ALIGNED short int | | /* A lexical scanner generated by flex */ | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 6 | #define YY_FLEX_SUBMINOR_VERSION 1 | #if YY_FLEX_SUBMINOR_VERSION > 0 | #define FLEX_BETA | #endif | | /* First, we deal with platform-specific or compiler-specific issues. */ | | /* begin standard C headers. */ | #include | #include | #include | #include | | /* end standard C headers. */ | | /* flex integer type definitions */ | | #ifndef FLEXINT_H | #define FLEXINT_H | | /* C99 systems have . Non-C99 systems may or may not. */ | | #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L | | /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, | * if you want the limit (max/min) macros for int types. | */ | #ifndef __STDC_LIMIT_MACROS | #define __STDC_LIMIT_MACROS 1 | #endif | | #include | typedef int8_t flex_int8_t; | typedef uint8_t flex_uint8_t; | typedef int16_t flex_int16_t; | typedef uint16_t flex_uint16_t; | typedef int32_t flex_int32_t; | typedef uint32_t flex_uint32_t; | #else | typedef signed char flex_int8_t; | typedef short int flex_int16_t; | typedef int flex_int32_t; | typedef unsigned char flex_uint8_t; | typedef unsigned short int flex_uint16_t; | typedef unsigned int flex_uint32_t; | | /* Limits of integral types. */ | #ifndef INT8_MIN | #define INT8_MIN (-128) | #endif | #ifndef INT16_MIN | #define INT16_MIN (-32767-1) | #endif | #ifndef INT32_MIN | #define INT32_MIN (-2147483647-1) | #endif | #ifndef INT8_MAX | #define INT8_MAX (127) | #endif | #ifndef INT16_MAX | #define INT16_MAX (32767) | #endif | #ifndef INT32_MAX | #define INT32_MAX (2147483647) | #endif | #ifndef UINT8_MAX | #define UINT8_MAX (255U) | #endif | #ifndef UINT16_MAX | #define UINT16_MAX (65535U) | #endif | #ifndef UINT32_MAX | #define UINT32_MAX (4294967295U) | #endif | | #endif /* ! C99 */ | | #endif /* ! FLEXINT_H */ | | /* TODO: this is always defined, so inline it */ | #define yyconst const | | #if defined(__GNUC__) && __GNUC__ >= 3 | #define yynoreturn __attribute__((__noreturn__)) | #else | #define yynoreturn | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN (yy_start) = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START (((yy_start) - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart(yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #ifndef YY_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k. | * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. | * Ditto for the __ia64__ case accordingly. | */ | #define YY_BUF_SIZE 32768 | #else | #define YY_BUF_SIZE 16384 | #endif /* __ia64__ */ | #endif | | /* The state buf must be large enough to hold one state per character in the main buffer. | */ | #define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) | | #ifndef YY_TYPEDEF_YY_BUFFER_STATE | #define YY_TYPEDEF_YY_BUFFER_STATE | typedef struct yy_buffer_state *YY_BUFFER_STATE; | #endif | | #ifndef YY_TYPEDEF_YY_SIZE_T | #define YY_TYPEDEF_YY_SIZE_T | typedef size_t yy_size_t; | #endif | | extern int yyleng; | | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | #define YY_LESS_LINENO(n) | #define YY_LINENO_REWIND_TO(ptr) | | /* Return all but the first "n" matched characters back to the input stream. */ | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | *yy_cp = (yy_hold_char); \ | YY_RESTORE_YY_MORE_OFFSET \ | (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, (yytext_ptr) ) | | #ifndef YY_STRUCT_YY_BUFFER_STATE | #define YY_STRUCT_YY_BUFFER_STATE | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | int yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | int yy_bs_lineno; /**< The line count. */ | int yy_bs_column; /**< The column count. */ | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | | }; | #endif /* !YY_STRUCT_YY_BUFFER_STATE */ | | /* Stack of input buffers. */ | static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ | static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ | static YY_BUFFER_STATE * yy_buffer_stack = NULL; /**< Stack as an array. */ | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | * | * Returns the top of the stack, or NULL. | */ | #define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ | ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ | : NULL) | | /* Same as previous macro, but useful when we know that the buffer stack is not | * NULL or when we need an lvalue. For internal use only. | */ | #define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = NULL; | static int yy_init = 0; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart (FILE *input_file ); | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); | YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); | void yy_delete_buffer (YY_BUFFER_STATE b ); | void yy_flush_buffer (YY_BUFFER_STATE b ); | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); | void yypop_buffer_state (void ); | | static void yyensure_buffer_stack (void ); | static void yy_load_buffer_state (void ); | static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); | | #define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) | | YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); | YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); | YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len ); | | void *yyalloc (yy_size_t ); | void *yyrealloc (void *,yy_size_t ); | void yyfree (void * ); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! YY_CURRENT_BUFFER ){ \ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! YY_CURRENT_BUFFER ){\ | yyensure_buffer_stack (); \ | YY_CURRENT_BUFFER_LVALUE = \ | yy_create_buffer(yyin,YY_BUF_SIZE ); \ | } \ | YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) | | /* Begin user sect3 */ | | typedef unsigned char YY_CHAR; | | FILE *yyin = NULL, *yyout = NULL; | | typedef int yy_state_type; | | extern int yylineno; | | int yylineno = 1; | | extern char *yytext; | #ifdef yytext_ptr | #undef yytext_ptr | #endif | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state (void ); | static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); | static int yy_get_next_buffer (void ); | static void yynoreturn yy_fatal_error (yyconst char* msg ); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | (yytext_ptr) = yy_bp; \ | (yytext_ptr) -= (yy_more_len); \ | yyleng = (int) (yy_cp - (yytext_ptr)); \ | (yy_hold_char) = *yy_cp; \ | *yy_cp = '\0'; \ | (yy_c_buf_p) = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | /* This struct is not used in this scanner, | but its presence is necessary. */ | struct yy_trans_info | { | flex_int32_t yy_verify; | flex_int32_t yy_nxt; | }; | static yyconst flex_int16_t yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst flex_int16_t yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst YY_CHAR yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst YY_CHAR yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst flex_uint16_t yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst flex_int16_t yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst flex_uint16_t yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst flex_int16_t yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | extern int yy_flex_debug; | int yy_flex_debug = 0; | | static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ | yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ | ++(yy_lp); \ | goto find_rule; \ | } | | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() ((yy_more_flag) = 1) | #define YY_MORE_ADJ (yy_more_len) | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #line 469 "lex.yy.c" | | #define INITIAL 0 | | #ifndef YY_NO_UNISTD_H | /* Special case for "unistd.h", since it is non-ANSI. We include it way | * down here because we want the user's section 1 to have been scanned first. | * The user has a chance to override it with an option. | */ | #include | #endif | | #ifndef YY_EXTRA_TYPE | #define YY_EXTRA_TYPE void * | #endif | | static int yy_init_globals (void ); | | /* Accessor methods to globals. | These are made visible to non-reentrant scanners for convenience. */ | | int yylex_destroy (void ); | | int yyget_debug (void ); | | void yyset_debug (int debug_flag ); | | YY_EXTRA_TYPE yyget_extra (void ); | | void yyset_extra (YY_EXTRA_TYPE user_defined ); | | FILE *yyget_in (void ); | | void yyset_in (FILE * _in_str ); | | FILE *yyget_out (void ); | | void yyset_out (FILE * _out_str ); | | int yyget_leng (void ); | | char *yyget_text (void ); | | int yyget_lineno (void ); | | void yyset_lineno (int _line_number ); | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap (void ); | #else | extern int yywrap (void ); | #endif | #endif | | #ifndef YY_NO_UNPUT | | static void yyunput (int c,char *buf_ptr ); | | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy (char *,yyconst char *,int ); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * ); | #endif | | #ifndef YY_NO_INPUT | | #ifdef __cplusplus | static int yyinput (void ); | #else | static int input (void ); | #endif | | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #ifdef __ia64__ | /* On IA-64, the buffer size is 16k, not 8k */ | #define YY_READ_BUF_SIZE 16384 | #else | #define YY_READ_BUF_SIZE 8192 | #endif /* __ia64__ */ | #endif | | /* Copy whatever the last rule matched to the standard output. */ | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ | { \ | int c = '*'; \ | size_t n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else \ | { \ | errno=0; \ | while ( (result = (int) fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ | { \ | if( errno != EINTR) \ | { \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | break; \ | } \ | errno=0; \ | clearerr(yyin); \ | } \ | }\ | \ | | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* end tables serialization structures and prototypes */ | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL_IS_OURS 1 | | extern int yylex (void); | | #define YY_DECL int yylex (void) | #endif /* !YY_DECL */ | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK /*LINTED*/break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | /** The main scanner function which does all the work. | */ | YY_DECL | { | yy_state_type yy_current_state; | char *yy_cp, *yy_bp; | int yy_act; | | if ( !(yy_init) ) | { | (yy_init) = 1; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | /* Create the reject buffer large enough to save one state per allowed character. */ | if ( ! (yy_state_buf) ) | (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); | if ( ! (yy_state_buf) ) | YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); | | if ( ! (yy_start) ) | (yy_start) = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! YY_CURRENT_BUFFER ) { | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_load_buffer_state( ); | } | | { | #line 1 "conftest.l" | | #line 695 "lex.yy.c" | | while ( /*CONSTCOND*/1 ) /* loops until end-of-file is reached */ | { | (yy_more_len) = 0; | if ( (yy_more_flag) ) | { | (yy_more_len) = (yy_c_buf_p) - (yytext_ptr); | (yy_more_flag) = 0; | } | yy_cp = (yy_c_buf_p); | | /* Support of yytext. */ | *yy_cp = (yy_hold_char); | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | yy_match: | do | { | YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (flex_int16_t) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[(yy_lp)]; | { | (yy_full_match) = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--(yy_state_ptr); | (yy_lp) = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | do_action: /* This label is used only to access EOF actions. */ | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ | yyless ((input () != 0)); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 8 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 9 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 10 "conftest.l" | ECHO; | YY_BREAK | #line 802 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = (yy_hold_char); | YY_RESTORE_YY_MORE_OFFSET | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between YY_CURRENT_BUFFER and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++(yy_c_buf_p); | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = (yy_c_buf_p); | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_END_OF_FILE: | { | (yy_did_buffer_switch_on_eof) = 0; | | if ( yywrap( ) ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = | (yytext_ptr) + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | (yy_c_buf_p) = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; | | yy_current_state = yy_get_previous_state( ); | | yy_cp = (yy_c_buf_p); | yy_bp = (yytext_ptr) + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of user's declarations */ | } /* end of yylex */ | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | static int yy_get_next_buffer (void) | { | char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; | char *source = (yytext_ptr); | yy_size_t number_to_move, i; | int ret_val; | | if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (yy_size_t) ((yy_c_buf_p) - (yytext_ptr)) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; | | else | { | int num_to_read = | YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), | (yy_n_chars), num_to_read ); | | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | if ( (yy_n_chars) == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart(yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | if ((int) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { | /* Extend the array by 50%, plus the number we really need. */ | int new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); | if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); | } | | (yy_n_chars) += number_to_move; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; | YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; | | (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; | | return ret_val; | } | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state (void) | { | yy_state_type yy_current_state; | char *yy_cp; | | yy_current_state = (yy_start); | | (yy_state_ptr) = (yy_state_buf); | *(yy_state_ptr)++ = yy_current_state; | | for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) | { | YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (flex_int16_t) yy_c]; | *(yy_state_ptr)++ = yy_current_state; | } | | return yy_current_state; | } | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) | { | int yy_is_jam; | | YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (flex_int16_t) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *(yy_state_ptr)++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | #ifndef YY_NO_UNPUT | | static void yyunput (int c, char * yy_bp ) | { | char *yy_cp; | | yy_cp = (yy_c_buf_p); | | /* undo effects of setting up yytext */ | *yy_cp = (yy_hold_char); | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | int number_to_move = (yy_n_chars) + 2; | char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ | YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; | char *source = | &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; | | while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = | (yy_n_chars) = (int) YY_CURRENT_BUFFER_LVALUE->yy_buf_size; | | if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | (yytext_ptr) = yy_bp; | (yy_hold_char) = *yy_cp; | (yy_c_buf_p) = yy_cp; | } | | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput (void) | #else | static int input (void) | #endif | | { | int c; | | *(yy_c_buf_p) = (yy_hold_char); | | if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) | /* This was really a NUL. */ | *(yy_c_buf_p) = '\0'; | | else | { /* need more input */ | int offset = (yy_c_buf_p) - (yytext_ptr); | ++(yy_c_buf_p); | | switch ( yy_get_next_buffer( ) ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart(yyin ); | | /*FALLTHROUGH*/ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap( ) ) | return 0; | | if ( ! (yy_did_buffer_switch_on_eof) ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | (yy_c_buf_p) = (yytext_ptr) + offset; | break; | } | } | } | | c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ | *(yy_c_buf_p) = '\0'; /* preserve yytext */ | (yy_hold_char) = *++(yy_c_buf_p); | | return c; | } | #endif /* ifndef YY_NO_INPUT */ | | /** Immediately switch to a different input stream. | * @param input_file A readable stream. | * | * @note This function does not reset the start condition to @c INITIAL . | */ | void yyrestart (FILE * input_file ) | { | | if ( ! YY_CURRENT_BUFFER ){ | yyensure_buffer_stack (); | YY_CURRENT_BUFFER_LVALUE = | yy_create_buffer(yyin,YY_BUF_SIZE ); | } | | yy_init_buffer(YY_CURRENT_BUFFER,input_file ); | yy_load_buffer_state( ); | } | | /** Switch to a different input buffer. | * @param new_buffer The new input buffer. | * | */ | void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) | { | | /* TODO. We should be able to replace this entire function body | * with | * yypop_buffer_state(); | * yypush_buffer_state(new_buffer); | */ | yyensure_buffer_stack (); | if ( YY_CURRENT_BUFFER == new_buffer ) | return; | | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | YY_CURRENT_BUFFER_LVALUE = new_buffer; | yy_load_buffer_state( ); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | (yy_did_buffer_switch_on_eof) = 1; | } | | static void yy_load_buffer_state (void) | { | (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; | (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; | yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; | (yy_hold_char) = *(yy_c_buf_p); | } | | /** Allocate and initialize an input buffer state. | * @param file A readable stream. | * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. | * | * @return the allocated buffer state. | */ | YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = (yy_size_t)size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer(b,file ); | | return b; | } | | /** Destroy the buffer. | * @param b a buffer created with yy_create_buffer() | * | */ | void yy_delete_buffer (YY_BUFFER_STATE b ) | { | | if ( ! b ) | return; | | if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ | YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yyfree((void *) b->yy_ch_buf ); | | yyfree((void *) b ); | } | | /* Initializes or reinitializes a buffer. | * This function is sometimes called more than once on the same buffer, | * such as during a yyrestart() or at EOF. | */ | static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) | | { | int oerrno = errno; | | yy_flush_buffer(b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | /* If b is the current buffer, then yy_init_buffer was _probably_ | * called from yyrestart() or through yy_get_next_buffer. | * In that case, we don't want to reset the lineno or column. | */ | if (b != YY_CURRENT_BUFFER){ | b->yy_bs_lineno = 1; | b->yy_bs_column = 0; | } | | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | | errno = oerrno; | } | | /** Discard all buffered characters. On the next scan, YY_INPUT will be called. | * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. | * | */ | void yy_flush_buffer (YY_BUFFER_STATE b ) | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == YY_CURRENT_BUFFER ) | yy_load_buffer_state( ); | } | | /** Pushes the new state onto the stack. The new state becomes | * the current state. This function will allocate the stack | * if necessary. | * @param new_buffer The new state. | * | */ | void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) | { | if (new_buffer == NULL) | return; | | yyensure_buffer_stack(); | | /* This block is copied from yy_switch_to_buffer. */ | if ( YY_CURRENT_BUFFER ) | { | /* Flush out information for old buffer. */ | *(yy_c_buf_p) = (yy_hold_char); | YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); | YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); | } | | /* Only push if top exists. Otherwise, replace top. */ | if (YY_CURRENT_BUFFER) | (yy_buffer_stack_top)++; | YY_CURRENT_BUFFER_LVALUE = new_buffer; | | /* copied from yy_switch_to_buffer. */ | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | | /** Removes and deletes the top of the stack, if present. | * The next element becomes the new top. | * | */ | void yypop_buffer_state (void) | { | if (!YY_CURRENT_BUFFER) | return; | | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | if ((yy_buffer_stack_top) > 0) | --(yy_buffer_stack_top); | | if (YY_CURRENT_BUFFER) { | yy_load_buffer_state( ); | (yy_did_buffer_switch_on_eof) = 1; | } | } | | /* Allocates the stack if it does not exist. | * Guarantees space for at least one push. | */ | static void yyensure_buffer_stack (void) | { | int num_to_alloc; | | if (!(yy_buffer_stack)) { | | /* First allocation is just for 2 elements, since we don't know if this | * scanner will even need a stack. We use 2 instead of 1 to avoid an | * immediate realloc on the next call. | */ | num_to_alloc = 1; /* After all that talk, this was set to 1 anyways... */ | (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc | (num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); | | (yy_buffer_stack_max) = num_to_alloc; | (yy_buffer_stack_top) = 0; | return; | } | | if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ | | /* Increase the buffer to prepare for a possible push. */ | yy_size_t grow_size = 8 /* arbitrary grow size */; | | num_to_alloc = (yy_buffer_stack_max) + grow_size; | (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc | ((yy_buffer_stack), | num_to_alloc * sizeof(struct yy_buffer_state*) | ); | if ( ! (yy_buffer_stack) ) | YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); | | /* zero only the new slots.*/ | memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); | (yy_buffer_stack_max) = num_to_alloc; | } | } | | /** Setup the input buffer state to scan directly from a user-specified character buffer. | * @param base the character buffer | * @param size the size in bytes of the character buffer | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return NULL; | | b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = NULL; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer(b ); | | return b; | } | | /** Setup the input buffer state to scan a string. The next call to yylex() will | * scan from a @e copy of @a str. | * @param yystr a NUL-terminated string to scan | * | * @return the newly allocated buffer state object. | * @note If you want to scan bytes that may contain NUL values, then use | * yy_scan_bytes() instead. | */ | YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) | { | | return yy_scan_bytes(yystr,(int) strlen(yystr) ); | } | | /** Setup the input buffer state to scan the given bytes. The next call to yylex() will | * scan from a @e copy of @a bytes. | * @param yybytes the byte buffer to scan | * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. | * | * @return the newly allocated buffer state object. | */ | YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len ) | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | yy_size_t i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = (yy_size_t) _yybytes_len + 2; | buf = (char *) yyalloc(n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < _yybytes_len; ++i ) | buf[i] = yybytes[i]; | | buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer(buf,n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | static void yynoreturn yy_fatal_error (yyconst char* msg ) | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | int yyless_macro_arg = (n); \ | YY_LESS_LINENO(yyless_macro_arg);\ | yytext[yyleng] = (yy_hold_char); \ | (yy_c_buf_p) = yytext + yyless_macro_arg; \ | (yy_hold_char) = *(yy_c_buf_p); \ | *(yy_c_buf_p) = '\0'; \ | yyleng = yyless_macro_arg; \ | } \ | while ( 0 ) | | /* Accessor methods (get/set functions) to struct members. */ | | /** Get the current line number. | * | */ | int yyget_lineno (void) | { | | return yylineno; | } | | /** Get the input stream. | * | */ | FILE *yyget_in (void) | { | return yyin; | } | | /** Get the output stream. | * | */ | FILE *yyget_out (void) | { | return yyout; | } | | /** Get the length of the current token. | * | */ | int yyget_leng (void) | { | return yyleng; | } | | /** Get the current token. | * | */ | | char *yyget_text (void) | { | return yytext; | } | | /** Set the current line number. | * @param _line_number line number | * | */ | void yyset_lineno (int _line_number ) | { | | yylineno = _line_number; | } | | /** Set the input stream. This does not discard the current | * input buffer. | * @param _in_str A readable stream. | * | * @see yy_switch_to_buffer | */ | void yyset_in (FILE * _in_str ) | { | yyin = _in_str ; | } | | void yyset_out (FILE * _out_str ) | { | yyout = _out_str ; | } | | int yyget_debug (void) | { | return yy_flex_debug; | } | | void yyset_debug (int _bdebug ) | { | yy_flex_debug = _bdebug ; | } | | static int yy_init_globals (void) | { | /* Initialization is the same as for the non-reentrant scanner. | * This function is called from yylex_destroy(), so don't allocate here. | */ | | (yy_buffer_stack) = NULL; | (yy_buffer_stack_top) = 0; | (yy_buffer_stack_max) = 0; | (yy_c_buf_p) = NULL; | (yy_init) = 0; | (yy_start) = 0; | | (yy_state_buf) = 0; | (yy_state_ptr) = 0; | (yy_full_match) = 0; | (yy_lp) = 0; | | /* Defined in main.c */ | #ifdef YY_STDINIT | yyin = stdin; | yyout = stdout; | #else | yyin = NULL; | yyout = NULL; | #endif | | /* For future reference: Set errno on error, since we are called by | * yylex_init() | */ | return 0; | } | | /* yylex_destroy is for both reentrant and non-reentrant scanners. */ | int yylex_destroy (void) | { | | /* Pop the buffer stack, destroying each element. */ | while(YY_CURRENT_BUFFER){ | yy_delete_buffer(YY_CURRENT_BUFFER ); | YY_CURRENT_BUFFER_LVALUE = NULL; | yypop_buffer_state(); | } | | /* Destroy the stack itself. */ | yyfree((yy_buffer_stack) ); | (yy_buffer_stack) = NULL; | | yyfree ( (yy_state_buf) ); | (yy_state_buf) = NULL; | | /* Reset the globals. This is important in a non-reentrant scanner so the next time | * yylex() is called, initialization will occur. */ | yy_init_globals( ); | | return 0; | } | | /* | * Internal utility routines. | */ | | #ifndef yytext_ptr | static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) | { | | int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen (yyconst char * s ) | { | int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | void *yyalloc (yy_size_t size ) | { | return malloc(size); | } | | void *yyrealloc (void * ptr, yy_size_t size ) | { | | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return realloc(ptr, size); | } | | void yyfree (void * ptr ) | { | free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ | } | | #define YYTABLES_NAME "yytables" | | #line 10 "conftest.l" | | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:16041: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c -lfl >&5 configure:16041: $? = 0 configure:16051: result: -lfl configure:16057: checking whether yytext is a pointer configure:16074: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c -lfl >&5 configure:16074: $? = 0 configure:16082: result: yes configure:16097: checking for ANSI C header files configure:16201: result: yes configure:16212: checking malloc.h usability configure:16212: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16212: $? = 0 configure:16212: result: yes configure:16212: checking malloc.h presence configure:16212: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c configure:16212: $? = 0 configure:16212: result: yes configure:16212: checking for malloc.h configure:16212: result: yes configure:16212: checking for strings.h configure:16212: result: yes configure:16212: checking for unistd.h configure:16212: result: yes configure:16212: checking libintl.h usability configure:16212: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16212: $? = 0 configure:16212: result: yes configure:16212: checking libintl.h presence configure:16212: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c configure:16212: $? = 0 configure:16212: result: yes configure:16212: checking for libintl.h configure:16212: result: yes configure:16212: checking stddef.h usability configure:16212: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16212: $? = 0 configure:16212: result: yes configure:16212: checking stddef.h presence configure:16212: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c configure:16212: $? = 0 configure:16212: result: yes configure:16212: checking for stddef.h configure:16212: result: yes configure:16223: checking for an ANSI C-conforming const configure:16289: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16289: $? = 0 configure:16296: result: yes configure:16304: checking for inline configure:16320: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16320: $? = 0 configure:16328: result: inline configure:16346: checking for stdbool.h that conforms to C99 configure:16413: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16413: $? = 0 configure:16420: result: yes configure:16422: checking for _Bool configure:16422: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16422: $? = 0 configure:16422: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 conftest.c: In function 'main': conftest.c:75:20: error: expected expression before ')' token if (sizeof ((_Bool))) ^ configure:16422: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | #define HAVE_LONG_LONG 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_NAMESPACES /**/ | #define HAVE_STL /**/ | #define HAVE_SSTREAM /**/ | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_MALLOC_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_STDDEF_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((_Bool))) | return 0; | ; | return 0; | } configure:16422: result: yes configure:16556: checking whether the preprocessor supports include_next configure:16594: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -Iconftestd1b -Iconftestd2 conftest.c >&5 configure:16594: $? = 0 configure:16615: result: yes configure:16644: checking getopt.h usability configure:16644: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:16644: $? = 0 configure:16644: result: yes configure:16644: checking getopt.h presence configure:16644: gcc -E -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c configure:16644: $? = 0 configure:16644: result: yes configure:16644: checking for getopt.h configure:16644: result: yes configure:16644: checking for stddef.h configure:16644: result: yes configure:16644: checking for string.h configure:16644: result: yes configure:16644: checking for unistd.h configure:16644: result: yes configure:16740: checking for getopt.h configure:16740: result: yes configure:16757: checking for getopt_long_only configure:16757: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:16757: $? = 0 configure:16757: result: yes configure:16771: checking whether optreset is declared configure:16771: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 conftest.c: In function 'main': conftest.c:56:10: error: 'optreset' undeclared (first use in this function); did you mean 'optopt'? (void) optreset; ^~~~~~~~ optopt conftest.c:56:10: note: each undeclared identifier is reported only once for each function it appears in configure:16771: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | #define HAVE_LONG_LONG 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_NAMESPACES /**/ | #define HAVE_STL /**/ | #define HAVE_SSTREAM /**/ | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_MALLOC_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE__BOOL 1 | #define HAVE_STDBOOL_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_GETOPT_LONG_ONLY 1 | /* end confdefs.h. */ | #include | | int | main () | { | #ifndef optreset | #ifdef __cplusplus | (void) optreset; | #else | (void) optreset; | #endif | #endif | | ; | return 0; | } configure:16771: result: no configure:16785: checking whether getopt_clip is declared configure:16785: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 conftest.c: In function 'main': conftest.c:57:10: error: 'getopt_clip' undeclared (first use in this function); did you mean 'getopt_long'? (void) getopt_clip; ^~~~~~~~~~~ getopt_long conftest.c:57:10: note: each undeclared identifier is reported only once for each function it appears in configure:16785: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "GNU gengetopt" | #define PACKAGE_TARNAME "gengetopt" | #define PACKAGE_VERSION "2.22.6" | #define PACKAGE_STRING "GNU gengetopt 2.22.6" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" | #define PACKAGE "gengetopt" | #define VERSION "2.22.6" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define __EXTENSIONS__ 1 | #define _ALL_SOURCE 1 | #define _GNU_SOURCE 1 | #define _POSIX_PTHREAD_SEMANTICS 1 | #define _TANDEM_SOURCE 1 | #define HAVE_LONG_LONG 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define HAVE_NAMESPACES /**/ | #define HAVE_STL /**/ | #define HAVE_SSTREAM /**/ | #define YYTEXT_POINTER 1 | #define STDC_HEADERS 1 | #define HAVE_MALLOC_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_LIBINTL_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE__BOOL 1 | #define HAVE_STDBOOL_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_STDDEF_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_GETOPT_H 1 | #define HAVE_GETOPT_LONG_ONLY 1 | #define HAVE_DECL_OPTRESET 0 | /* end confdefs.h. */ | #include | | int | main () | { | #ifndef getopt_clip | #ifdef __cplusplus | (void) getopt_clip; | #else | (void) getopt_clip; | #endif | #endif | | ; | return 0; | } configure:16785: result: no configure:16803: checking whether getopt is POSIX compatible configure:16911: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:16911: $? = 0 configure:16911: ./conftest configure:16911: $? = 0 configure:16922: result: yes configure:16930: checking for working GNU getopt function configure:17012: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 configure:17012: $? = 0 configure:17012: ./conftest configure:17012: $? = 0 configure:17026: result: yes configure:17034: checking whether getenv is declared configure:17034: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17034: $? = 0 configure:17034: result: yes configure:17102: checking for wchar_t configure:17119: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17119: $? = 0 configure:17126: result: yes configure:17213: checking for strdup configure:17213: gcc -o conftest -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib conftest.c >&5 conftest.c:74:6: warning: conflicting types for built-in function 'strdup' [-Wbuiltin-declaration-mismatch] char strdup (); ^~~~~~ configure:17213: $? = 0 configure:17213: result: yes configure:17227: checking whether strdup is declared configure:17227: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17227: $? = 0 configure:17227: result: yes configure:17239: checking for C/C++ restrict keyword configure:17264: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17264: $? = 0 configure:17272: result: __restrict configure:17356: checking whether memmem is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether mempcpy is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether memrchr is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether rawmemchr is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether stpcpy is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether stpncpy is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strchrnul is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strdup is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strncat is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strndup is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strnlen is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strpbrk is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strsep is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strcasestr is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strtok_r is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strsignal is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17356: checking whether strverscmp is declared without a macro configure:17374: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17374: $? = 0 configure:17382: result: yes configure:17498: checking whether NULL can be used in arbitrary expressions configure:17516: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17516: $? = 0 configure:17523: result: yes configure:17722: checking whether chown is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether dup2 is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether dup3 is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether environ is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether euidaccess is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether faccessat is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether fchdir is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether fchownat is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether fsync is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether ftruncate is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getcwd is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getdomainname is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getdtablesize is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getgroups is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether gethostname is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getlogin is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getlogin_r is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getpagesize is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether getusershell is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether setusershell is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether endusershell is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether lchown is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether link is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether linkat is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether lseek is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether pipe2 is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether pread is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether pwrite is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether readlink is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether readlinkat is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether rmdir is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether sleep is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether symlink is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether symlinkat is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether ttyname_r is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether unlink is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether unlinkat is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17722: checking whether usleep is declared without a macro configure:17749: gcc -c -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include conftest.c >&5 configure:17749: $? = 0 configure:17757: result: yes configure:17813: checking for tar configure:17831: found /mnt/gold/openwrt/lede/staging_dir/host/bin/tar configure:17843: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/tar configure:17860: checking for source-highlight configure:17893: result: no configure:17906: checking for gengen configure:17939: result: no configure:17952: checking for valgrind configure:17985: result: no configure:17998: checking for help2man configure:18016: found /mnt/gold/openwrt/lede/staging_dir/host/bin/help2man configure:18028: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/help2man configure:18086: checking for bash configure:18104: found /mnt/gold/openwrt/lede/staging_dir/host/bin/bash configure:18116: result: /mnt/gold/openwrt/lede/staging_dir/host/bin/bash configure:18304: checking that generated files are newer than configure configure:18310: result: done configure:18393: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by GNU gengetopt config.status 2.22.6, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on anneke config.status:1491: creating Makefile config.status:1491: creating src/Makefile config.status:1491: creating src/skels/Makefile config.status:1491: creating src/tests/Makefile config.status:1491: creating doc/Makefile config.status:1491: creating gl/Makefile config.status:1491: creating tests/Makefile config.status:1491: creating tests/output_dir/Makefile config.status:1491: creating tests/output_header_dir/Makefile config.status:1491: creating tests/test_conf.conf config.status:1491: creating tests/test_conf_inc.conf config.status:1491: creating tests/test_conf_parser_ov2.c config.status:1491: creating tests/test_conf_parser_ov3.c config.status:1491: creating tests/test_conf_parser_ov4.c config.status:1491: creating tests/no_optgiven.sh config.status:1491: creating tests/valgrind_tests.sh config.status:1491: creating tests/valgrind_suppressions.sh config.status:1491: creating tests/more_than_once.sh config.status:1491: creating tests/test_all_opts.sh config.status:1491: creating tests/test_all_opts_file_save.sh config.status:1491: creating tests/test_groups.sh config.status:1491: creating tests/test_modes.sh config.status:1491: creating tests/test_conf_parser.sh config.status:1491: creating tests/test_conf_parser_save.sh config.status:1491: creating tests/test_conf_parser_grp.sh config.status:1491: creating tests/test_conf_parser_ov.sh config.status:1491: creating tests/test_conf_parser_ov2.sh config.status:1491: creating tests/test_conf_parser_ov3.sh config.status:1491: creating tests/test_conf_parser_ov4.sh config.status:1491: creating tests/test_conf_parser_err.sh config.status:1491: creating tests/test_conf_parser_err_string.sh config.status:1491: creating tests/test_multiple.sh config.status:1491: creating tests/test_multiple_err.sh config.status:1491: creating tests/test_simple_multiple_default.sh config.status:1491: creating tests/test_simple_multiple.sh config.status:1491: creating tests/test_sections.sh config.status:1491: creating tests/test_default_values.sh config.status:1491: creating tests/test_values.sh config.status:1491: creating tests/test_values_err.sh config.status:1491: creating tests/test_show_help.sh config.status:1491: creating tests/test_err.sh config.status:1491: creating tests/test_dep.sh config.status:1491: creating tests/test_manual_help.sh config.status:1491: creating tests/test_multiple_parsers.sh config.status:1491: creating config.h config.status:1720: executing depfiles commands config.status:1720: executing libtool commands ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=x86_64-pc-linux-gnu ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_c_inline=inline ac_cv_c_long_long=yes ac_cv_c_restrict=__restrict ac_cv_cxx_compiler_gnu=yes ac_cv_cxx_have_sstream=yes ac_cv_cxx_have_stl=yes ac_cv_cxx_namespaces=yes ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set=set ac_cv_env_CC_value=gcc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include ' ac_cv_env_CPPFLAGS_set=set ac_cv_env_CPPFLAGS_value='-I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include ' ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXCPP_set= ac_cv_env_CXXCPP_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set=set ac_cv_env_LDFLAGS_value='-L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib ' ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_YACC_set= ac_cv_env_YACC_value= ac_cv_env_YFLAGS_set= ac_cv_env_YFLAGS_value= ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-pc-linux-gnu ac_cv_env_host_alias_set=set ac_cv_env_host_alias_value=x86_64-pc-linux-gnu ac_cv_env_target_alias_set=set ac_cv_env_target_alias_value=x86_64-pc-linux-gnu ac_cv_func_getopt_long_only=yes ac_cv_func_strdup=yes ac_cv_have_decl_chown=yes ac_cv_have_decl_dup2=yes ac_cv_have_decl_dup3=yes ac_cv_have_decl_endusershell=yes ac_cv_have_decl_environ=yes ac_cv_have_decl_euidaccess=yes ac_cv_have_decl_faccessat=yes ac_cv_have_decl_fchdir=yes ac_cv_have_decl_fchownat=yes ac_cv_have_decl_fsync=yes ac_cv_have_decl_ftruncate=yes ac_cv_have_decl_getcwd=yes ac_cv_have_decl_getdomainname=yes ac_cv_have_decl_getdtablesize=yes ac_cv_have_decl_getenv=yes ac_cv_have_decl_getgroups=yes ac_cv_have_decl_gethostname=yes ac_cv_have_decl_getlogin=yes ac_cv_have_decl_getlogin_r=yes ac_cv_have_decl_getopt_clip=no ac_cv_have_decl_getpagesize=yes ac_cv_have_decl_getusershell=yes ac_cv_have_decl_lchown=yes ac_cv_have_decl_link=yes ac_cv_have_decl_linkat=yes ac_cv_have_decl_lseek=yes ac_cv_have_decl_memmem=yes ac_cv_have_decl_mempcpy=yes ac_cv_have_decl_memrchr=yes ac_cv_have_decl_optreset=no ac_cv_have_decl_pipe2=yes ac_cv_have_decl_pread=yes ac_cv_have_decl_pwrite=yes ac_cv_have_decl_rawmemchr=yes ac_cv_have_decl_readlink=yes ac_cv_have_decl_readlinkat=yes ac_cv_have_decl_rmdir=yes ac_cv_have_decl_setusershell=yes ac_cv_have_decl_sleep=yes ac_cv_have_decl_stpcpy=yes ac_cv_have_decl_stpncpy=yes ac_cv_have_decl_strcasestr=yes ac_cv_have_decl_strchrnul=yes ac_cv_have_decl_strdup=yes ac_cv_have_decl_strncat=yes ac_cv_have_decl_strndup=yes ac_cv_have_decl_strnlen=yes ac_cv_have_decl_strpbrk=yes ac_cv_have_decl_strsep=yes ac_cv_have_decl_strsignal=yes ac_cv_have_decl_strtok_r=yes ac_cv_have_decl_strverscmp=yes ac_cv_have_decl_symlink=yes ac_cv_have_decl_symlinkat=yes ac_cv_have_decl_ttyname_r=yes ac_cv_have_decl_unlink=yes ac_cv_have_decl_unlinkat=yes ac_cv_have_decl_usleep=yes ac_cv_header_dlfcn_h=yes ac_cv_header_getopt_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_libintl_h=yes ac_cv_header_malloc_h=yes ac_cv_header_memory_h=yes ac_cv_header_minix_config_h=no ac_cv_header_stdbool_h=yes ac_cv_header_stdc=yes ac_cv_header_stddef_h=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=x86_64-pc-linux-gnu ac_cv_lib_lex=-lfl ac_cv_objext=o ac_cv_path_BASH_SHELL=/mnt/gold/openwrt/lede/staging_dir/host/bin/bash ac_cv_path_EGREP='/mnt/gold/openwrt/lede/staging_dir/host/bin/grep -E' ac_cv_path_FGREP='/mnt/gold/openwrt/lede/staging_dir/host/bin/grep -F' ac_cv_path_GREP=/mnt/gold/openwrt/lede/staging_dir/host/bin/grep ac_cv_path_HELP2MAN=/mnt/gold/openwrt/lede/staging_dir/host/bin/help2man ac_cv_path_SED=/mnt/gold/openwrt/lede/staging_dir/host/bin/sed ac_cv_path_TAR=/mnt/gold/openwrt/lede/staging_dir/host/bin/tar ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AR=x86_64-pc-linux-gnu-ar ac_cv_prog_AWK=gawk ac_cv_prog_CC=gcc ac_cv_prog_CPP='gcc -E' ac_cv_prog_CXX=x86_64-pc-linux-gnu-g++ ac_cv_prog_CXXCPP='x86_64-pc-linux-gnu-g++ -E' ac_cv_prog_LEX=flex ac_cv_prog_OBJDUMP=x86_64-pc-linux-gnu-objdump ac_cv_prog_RANLIB=x86_64-pc-linux-gnu-ranlib ac_cv_prog_STRIP=x86_64-pc-linux-gnu-strip ac_cv_prog_YACC='bison -y' ac_cv_prog_cc_c89= ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes ac_cv_safe_to_define___extensions__=yes ac_cv_type__Bool=yes ac_cv_type_size_t=yes am_cv_CC_dependencies_compiler_type=gcc3 am_cv_CXX_dependencies_compiler_type=gcc3 am_cv_make_support_nested_variables=yes am_cv_prog_cc_c_o=yes gl_cv_decl_null_works=yes gl_cv_func_getopt_gnu=yes gl_cv_func_getopt_posix=yes gl_cv_have_include_next=yes gl_cv_have_raw_decl_chown=yes gl_cv_have_raw_decl_dup2=yes gl_cv_have_raw_decl_dup3=yes gl_cv_have_raw_decl_endusershell=yes gl_cv_have_raw_decl_environ=yes gl_cv_have_raw_decl_euidaccess=yes gl_cv_have_raw_decl_faccessat=yes gl_cv_have_raw_decl_fchdir=yes gl_cv_have_raw_decl_fchownat=yes gl_cv_have_raw_decl_fsync=yes gl_cv_have_raw_decl_ftruncate=yes gl_cv_have_raw_decl_getcwd=yes gl_cv_have_raw_decl_getdomainname=yes gl_cv_have_raw_decl_getdtablesize=yes gl_cv_have_raw_decl_getgroups=yes gl_cv_have_raw_decl_gethostname=yes gl_cv_have_raw_decl_getlogin=yes gl_cv_have_raw_decl_getlogin_r=yes gl_cv_have_raw_decl_getpagesize=yes gl_cv_have_raw_decl_getusershell=yes gl_cv_have_raw_decl_lchown=yes gl_cv_have_raw_decl_link=yes gl_cv_have_raw_decl_linkat=yes gl_cv_have_raw_decl_lseek=yes gl_cv_have_raw_decl_memmem=yes gl_cv_have_raw_decl_mempcpy=yes gl_cv_have_raw_decl_memrchr=yes gl_cv_have_raw_decl_pipe2=yes gl_cv_have_raw_decl_pread=yes gl_cv_have_raw_decl_pwrite=yes gl_cv_have_raw_decl_rawmemchr=yes gl_cv_have_raw_decl_readlink=yes gl_cv_have_raw_decl_readlinkat=yes gl_cv_have_raw_decl_rmdir=yes gl_cv_have_raw_decl_setusershell=yes gl_cv_have_raw_decl_sleep=yes gl_cv_have_raw_decl_stpcpy=yes gl_cv_have_raw_decl_stpncpy=yes gl_cv_have_raw_decl_strcasestr=yes gl_cv_have_raw_decl_strchrnul=yes gl_cv_have_raw_decl_strdup=yes gl_cv_have_raw_decl_strncat=yes gl_cv_have_raw_decl_strndup=yes gl_cv_have_raw_decl_strnlen=yes gl_cv_have_raw_decl_strpbrk=yes gl_cv_have_raw_decl_strsep=yes gl_cv_have_raw_decl_strsignal=yes gl_cv_have_raw_decl_strtok_r=yes gl_cv_have_raw_decl_strverscmp=yes gl_cv_have_raw_decl_symlink=yes gl_cv_have_raw_decl_symlinkat=yes gl_cv_have_raw_decl_ttyname_r=yes gl_cv_have_raw_decl_unlink=yes gl_cv_have_raw_decl_unlinkat=yes gl_cv_have_raw_decl_usleep=yes gl_cv_next_getopt_h='' gl_cv_next_string_h='' gl_cv_next_unistd_h='' gt_cv_c_wchar_t=yes lt_cv_ar_at_file=@ lt_cv_archive_cmds_need_lc=no lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/x86_64-pc-linux-gnu/bin/ld lt_cv_path_LDCXX='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64' lt_cv_path_NM='/usr/bin/nm -B' lt_cv_path_mainfest_tool=no lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_c_o_CXX=yes lt_cv_prog_compiler_pic='-fPIC -DPIC' lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC' lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_pic_works_CXX=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_compiler_static_works_CXX=yes lt_cv_prog_gnu_ld=yes lt_cv_prog_gnu_ldcxx=yes lt_cv_sharedlib_from_linklib_cmd='printf %s\n' lt_cv_shlibpath_overrides_runpath=yes lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'' | sed '\''/ __gnu_lto/d'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\)[ ]*$/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_max_cmd_len=1572864 lt_cv_to_host_file_cmd=func_convert_file_noop lt_cv_to_tool_file_cmd=func_convert_file_noop ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /mnt/gold/openwrt/lede/build_dir/host/gengetopt-2.22.6/build-aux/missing aclocal-1.15' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='1' AM_DEFAULT_VERBOSITY='1' AM_V='1' AR='x86_64-pc-linux-gnu-ar' AUTOCONF='${SHELL} /mnt/gold/openwrt/lede/build_dir/host/gengetopt-2.22.6/build-aux/missing autoconf' AUTOHEADER='${SHELL} /mnt/gold/openwrt/lede/build_dir/host/gengetopt-2.22.6/build-aux/missing autoheader' AUTOMAKE='${SHELL} /mnt/gold/openwrt/lede/build_dir/host/gengetopt-2.22.6/build-aux/missing automake-1.15' AWK='gawk' BASH_SHELL='/mnt/gold/openwrt/lede/staging_dir/host/bin/bash' CC='gcc' CCDEPMODE='depmode=gcc3' CFLAGS='-O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include ' CPP='gcc -E' CPPFLAGS='-I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include ' CXX='x86_64-pc-linux-gnu-g++' CXXCPP='x86_64-pc-linux-gnu-g++ -E' CXXDEPMODE='depmode=gcc3' CXXFLAGS='-g -O2' CYGPATH_W='echo' DEFS='-DHAVE_CONFIG_H' DEPDIR='.deps' DLLTOOL='false' DSYMUTIL='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/mnt/gold/openwrt/lede/staging_dir/host/bin/grep -E' EXEEXT='' FGREP='/mnt/gold/openwrt/lede/staging_dir/host/bin/grep -F' GENGEN='' GETOPT_H='' GL_COND_LIBTOOL_FALSE='#' GL_COND_LIBTOOL_TRUE='' GNULIB_CHOWN='0' GNULIB_CLOSE='0' GNULIB_DUP2='0' GNULIB_DUP3='0' GNULIB_ENVIRON='0' GNULIB_EUIDACCESS='0' GNULIB_FACCESSAT='0' GNULIB_FCHDIR='0' GNULIB_FCHOWNAT='0' GNULIB_FSYNC='0' GNULIB_FTRUNCATE='0' GNULIB_GETCWD='0' GNULIB_GETDOMAINNAME='0' GNULIB_GETDTABLESIZE='0' GNULIB_GETGROUPS='0' GNULIB_GETHOSTNAME='0' GNULIB_GETLOGIN='0' GNULIB_GETLOGIN_R='0' GNULIB_GETPAGESIZE='0' GNULIB_GETUSERSHELL='0' GNULIB_LCHOWN='0' GNULIB_LINK='0' GNULIB_LINKAT='0' GNULIB_LSEEK='0' GNULIB_MBSCASECMP='0' GNULIB_MBSCASESTR='0' GNULIB_MBSCHR='0' GNULIB_MBSCSPN='0' GNULIB_MBSLEN='0' GNULIB_MBSNCASECMP='0' GNULIB_MBSNLEN='0' GNULIB_MBSPBRK='0' GNULIB_MBSPCASECMP='0' GNULIB_MBSRCHR='0' GNULIB_MBSSEP='0' GNULIB_MBSSPN='0' GNULIB_MBSSTR='0' GNULIB_MBSTOK_R='0' GNULIB_MEMCHR='0' GNULIB_MEMMEM='0' GNULIB_MEMPCPY='0' GNULIB_MEMRCHR='0' GNULIB_PIPE2='0' GNULIB_PREAD='0' GNULIB_PWRITE='0' GNULIB_RAWMEMCHR='0' GNULIB_READLINK='0' GNULIB_READLINKAT='0' GNULIB_RMDIR='0' GNULIB_SLEEP='0' GNULIB_STPCPY='0' GNULIB_STPNCPY='0' GNULIB_STRCASESTR='0' GNULIB_STRCHRNUL='0' GNULIB_STRDUP='1' GNULIB_STRERROR='0' GNULIB_STRNCAT='0' GNULIB_STRNDUP='0' GNULIB_STRNLEN='0' GNULIB_STRPBRK='0' GNULIB_STRSEP='0' GNULIB_STRSIGNAL='0' GNULIB_STRSTR='0' GNULIB_STRTOK_R='0' GNULIB_STRVERSCMP='0' GNULIB_SYMLINK='0' GNULIB_SYMLINKAT='0' GNULIB_TTYNAME_R='0' GNULIB_UNISTD_H_GETOPT='0' GNULIB_UNISTD_H_SIGPIPE='0' GNULIB_UNLINK='0' GNULIB_UNLINKAT='0' GNULIB_USLEEP='0' GNULIB_WRITE='0' GREP='/mnt/gold/openwrt/lede/staging_dir/host/bin/grep' HAVE_CHOWN='1' HAVE_DECL_ENVIRON='1' HAVE_DECL_GETLOGIN_R='1' HAVE_DECL_GETPAGESIZE='1' HAVE_DECL_GETUSERSHELL='1' HAVE_DECL_MEMMEM='1' HAVE_DECL_MEMRCHR='1' HAVE_DECL_STRDUP='1' HAVE_DECL_STRNDUP='1' HAVE_DECL_STRNLEN='1' HAVE_DECL_STRSIGNAL='1' HAVE_DECL_STRTOK_R='1' HAVE_DUP2='1' HAVE_DUP3='1' HAVE_EUIDACCESS='1' HAVE_FACCESSAT='1' HAVE_FCHDIR='1' HAVE_FCHOWNAT='1' HAVE_FSYNC='1' HAVE_FTRUNCATE='1' HAVE_GETDOMAINNAME='1' HAVE_GETDTABLESIZE='1' HAVE_GETGROUPS='1' HAVE_GETHOSTNAME='1' HAVE_GETLOGIN='1' HAVE_GETOPT_H='1' HAVE_GETPAGESIZE='1' HAVE_LCHOWN='1' HAVE_LINK='1' HAVE_LINKAT='1' HAVE_MBSLEN='0' HAVE_MEMCHR='1' HAVE_MEMPCPY='1' HAVE_OS_H='0' HAVE_PIPE2='1' HAVE_PREAD='1' HAVE_PWRITE='1' HAVE_RAWMEMCHR='1' HAVE_READLINK='1' HAVE_READLINKAT='1' HAVE_SLEEP='1' HAVE_STPCPY='1' HAVE_STPNCPY='1' HAVE_STRCASESTR='1' HAVE_STRCHRNUL='1' HAVE_STRPBRK='1' HAVE_STRSEP='1' HAVE_STRVERSCMP='1' HAVE_SYMLINK='1' HAVE_SYMLINKAT='1' HAVE_SYS_PARAM_H='0' HAVE_TTYNAME_R='1' HAVE_UNISTD_H='1' HAVE_UNLINKAT='1' HAVE_USLEEP='1' HAVE_WCHAR_T='1' HELP2MAN='/mnt/gold/openwrt/lede/staging_dir/host/bin/help2man' INCLUDE_NEXT='include_next' INCLUDE_NEXT_AS_FIRST_DIRECTIVE='include_next' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LD='/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64' LDFLAGS='-L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib ' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBINTL='' LIBOBJS='' LIBS='' LIBTOOL='$(SHELL) $(top_builddir)/libtool' LIPO='' LN_S='ln -s' LTLIBINTL='' LTLIBOBJS='' MAKEINFO='${SHELL} /mnt/gold/openwrt/lede/build_dir/host/gengetopt-2.22.6/build-aux/missing makeinfo' MANIFEST_TOOL=':' MKDIR_P='/bin/mkdir -p' NEXT_AS_FIRST_DIRECTIVE_GETOPT_H='' NEXT_AS_FIRST_DIRECTIVE_STDDEF_H='' NEXT_AS_FIRST_DIRECTIVE_STRING_H='' NEXT_AS_FIRST_DIRECTIVE_UNISTD_H='' NEXT_GETOPT_H='' NEXT_STDDEF_H='' NEXT_STRING_H='' NEXT_UNISTD_H='' NM='/usr/bin/nm -B' NMEDIT='' NO_CROSSCOMPILING_FALSE='#' NO_CROSSCOMPILING_TRUE='' NO_GENGEN_FALSE='#' NO_GENGEN_TRUE='' NO_HELP2MAN_FALSE='' NO_HELP2MAN_TRUE='#' NO_SOURCEHIGHLIGHT_FALSE='#' NO_SOURCEHIGHLIGHT_TRUE='' NO_STRDUP_FALSE='' NO_STRDUP_TRUE='#' OBJDUMP='x86_64-pc-linux-gnu-objdump' OBJEXT='o' OTOOL64='' OTOOL='' PACKAGE='gengetopt' PACKAGE_BUGREPORT='' PACKAGE_NAME='GNU gengetopt' PACKAGE_STRING='GNU gengetopt 2.22.6' PACKAGE_TARNAME='gengetopt' PACKAGE_URL='http://www.gnu.org/software/gengetopt/' PACKAGE_VERSION='2.22.6' PATH_SEPARATOR=':' PRAGMA_SYSTEM_HEADER='#pragma GCC system_header' RANLIB='x86_64-pc-linux-gnu-ranlib' REPLACE_CHOWN='0' REPLACE_CLOSE='0' REPLACE_DUP2='0' REPLACE_DUP='0' REPLACE_FCHOWNAT='0' REPLACE_GETCWD='0' REPLACE_GETGROUPS='0' REPLACE_GETPAGESIZE='0' REPLACE_LCHOWN='0' REPLACE_LINK='0' REPLACE_LINKAT='0' REPLACE_LSEEK='0' REPLACE_MEMCHR='0' REPLACE_MEMMEM='0' REPLACE_NULL='0' REPLACE_PREAD='0' REPLACE_PWRITE='0' REPLACE_READLINK='0' REPLACE_RMDIR='0' REPLACE_SLEEP='0' REPLACE_STPNCPY='0' REPLACE_STRCASESTR='0' REPLACE_STRDUP='0' REPLACE_STRERROR='0' REPLACE_STRNCAT='0' REPLACE_STRNDUP='0' REPLACE_STRNLEN='0' REPLACE_STRSIGNAL='0' REPLACE_STRSTR='0' REPLACE_STRTOK_R='0' REPLACE_SYMLINK='0' REPLACE_TTYNAME_R='0' REPLACE_UNLINK='0' REPLACE_UNLINKAT='0' REPLACE_USLEEP='0' REPLACE_WRITE='0' SED='/mnt/gold/openwrt/lede/staging_dir/host/bin/sed' SET_MAKE='' SHELL='/usr/bin/env bash' SOURCEHIGHLIGHT='' STDDEF_H='' STRIP='x86_64-pc-linux-gnu-strip' TAR='/mnt/gold/openwrt/lede/staging_dir/host/bin/tar' UNDEFINE_STRTOK_R='0' UNISTD_H_HAVE_WINSOCK2_H='0' UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS='0' VALGRIND='' VERSION='2.22.6' YACC='bison -y' YFLAGS=' -d -v' ac_ct_AR='' ac_ct_CC='' ac_ct_CXX='' ac_ct_DUMPBIN='' am__EXEEXT_FALSE='' am__EXEEXT_TRUE='#' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='#' am__fastdepCXX_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__nodep='_no' am__quote='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' bindir='${exec_prefix}/bin' build='x86_64-pc-linux-gnu' build_alias='x86_64-pc-linux-gnu' build_cpu='x86_64' build_os='linux-gnu' build_vendor='pc' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='/mnt/gold/openwrt/lede/staging_dir/host' gengetoptdocdir='${datarootdir}/doc/${PACKAGE_TARNAME}' gengetoptexamplesdir='${datarootdir}/doc/${PACKAGE_TARNAME}/examples' gl_LIBOBJS='' gl_LTLIBOBJS='' gltests_LIBOBJS='' gltests_LTLIBOBJS='' gltests_WITNESS='IN_GENGETOPT_GNULIB_TESTS' host='x86_64-pc-linux-gnu' host_alias='x86_64-pc-linux-gnu' host_cpu='x86_64' host_os='linux-gnu' host_vendor='pc' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='${SHELL} /mnt/gold/openwrt/lede/build_dir/host/gengetopt-2.22.6/build-aux/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/mnt/gold/openwrt/lede/staging_dir/host/var' mandir='${datarootdir}/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/mnt/gold/openwrt/lede/staging_dir/host' program_transform_name='s&$$&&;s&^&&' psdir='${docdir}' sbindir='/mnt/gold/openwrt/lede/staging_dir/host/bin' sharedstatedir='${prefix}/com' sysconfdir='/mnt/gold/openwrt/lede/staging_dir/host/etc' target_alias='x86_64-pc-linux-gnu' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "GNU gengetopt" #define PACKAGE_TARNAME "gengetopt" #define PACKAGE_VERSION "2.22.6" #define PACKAGE_STRING "GNU gengetopt 2.22.6" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "http://www.gnu.org/software/gengetopt/" #define PACKAGE "gengetopt" #define VERSION "2.22.6" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define __EXTENSIONS__ 1 #define _ALL_SOURCE 1 #define _GNU_SOURCE 1 #define _POSIX_PTHREAD_SEMANTICS 1 #define _TANDEM_SOURCE 1 #define HAVE_LONG_LONG 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define HAVE_NAMESPACES /**/ #define HAVE_STL /**/ #define HAVE_SSTREAM /**/ #define YYTEXT_POINTER 1 #define STDC_HEADERS 1 #define HAVE_MALLOC_H 1 #define HAVE_STRINGS_H 1 #define HAVE_UNISTD_H 1 #define HAVE_LIBINTL_H 1 #define HAVE_STDDEF_H 1 #define HAVE__BOOL 1 #define HAVE_STDBOOL_H 1 #define HAVE_GETOPT_H 1 #define HAVE_STDDEF_H 1 #define HAVE_STRING_H 1 #define HAVE_UNISTD_H 1 #define HAVE_GETOPT_H 1 #define HAVE_GETOPT_LONG_ONLY 1 #define HAVE_DECL_OPTRESET 0 #define HAVE_DECL_GETOPT_CLIP 0 #define HAVE_DECL_GETENV 1 #define HAVE_WCHAR_T 1 #define HAVE_STRDUP 1 #define HAVE_DECL_STRDUP 1 #define restrict __restrict #define HAVE_RAW_DECL_MEMMEM 1 #define HAVE_RAW_DECL_MEMPCPY 1 #define HAVE_RAW_DECL_MEMRCHR 1 #define HAVE_RAW_DECL_RAWMEMCHR 1 #define HAVE_RAW_DECL_STPCPY 1 #define HAVE_RAW_DECL_STPNCPY 1 #define HAVE_RAW_DECL_STRCHRNUL 1 #define HAVE_RAW_DECL_STRDUP 1 #define HAVE_RAW_DECL_STRNCAT 1 #define HAVE_RAW_DECL_STRNDUP 1 #define HAVE_RAW_DECL_STRNLEN 1 #define HAVE_RAW_DECL_STRPBRK 1 #define HAVE_RAW_DECL_STRSEP 1 #define HAVE_RAW_DECL_STRCASESTR 1 #define HAVE_RAW_DECL_STRTOK_R 1 #define HAVE_RAW_DECL_STRSIGNAL 1 #define HAVE_RAW_DECL_STRVERSCMP 1 #define GNULIB_TEST_GETOPT_GNU 1 #define GNULIB_TEST_STRDUP 1 #define HAVE_RAW_DECL_CHOWN 1 #define HAVE_RAW_DECL_DUP2 1 #define HAVE_RAW_DECL_DUP3 1 #define HAVE_RAW_DECL_ENVIRON 1 #define HAVE_RAW_DECL_EUIDACCESS 1 #define HAVE_RAW_DECL_FACCESSAT 1 #define HAVE_RAW_DECL_FCHDIR 1 #define HAVE_RAW_DECL_FCHOWNAT 1 #define HAVE_RAW_DECL_FSYNC 1 #define HAVE_RAW_DECL_FTRUNCATE 1 #define HAVE_RAW_DECL_GETCWD 1 #define HAVE_RAW_DECL_GETDOMAINNAME 1 #define HAVE_RAW_DECL_GETDTABLESIZE 1 #define HAVE_RAW_DECL_GETGROUPS 1 #define HAVE_RAW_DECL_GETHOSTNAME 1 #define HAVE_RAW_DECL_GETLOGIN 1 #define HAVE_RAW_DECL_GETLOGIN_R 1 #define HAVE_RAW_DECL_GETPAGESIZE 1 #define HAVE_RAW_DECL_GETUSERSHELL 1 #define HAVE_RAW_DECL_SETUSERSHELL 1 #define HAVE_RAW_DECL_ENDUSERSHELL 1 #define HAVE_RAW_DECL_LCHOWN 1 #define HAVE_RAW_DECL_LINK 1 #define HAVE_RAW_DECL_LINKAT 1 #define HAVE_RAW_DECL_LSEEK 1 #define HAVE_RAW_DECL_PIPE2 1 #define HAVE_RAW_DECL_PREAD 1 #define HAVE_RAW_DECL_PWRITE 1 #define HAVE_RAW_DECL_READLINK 1 #define HAVE_RAW_DECL_READLINKAT 1 #define HAVE_RAW_DECL_RMDIR 1 #define HAVE_RAW_DECL_SLEEP 1 #define HAVE_RAW_DECL_SYMLINK 1 #define HAVE_RAW_DECL_SYMLINKAT 1 #define HAVE_RAW_DECL_TTYNAME_R 1 #define HAVE_RAW_DECL_UNLINK 1 #define HAVE_RAW_DECL_UNLINKAT 1 #define HAVE_RAW_DECL_USLEEP 1 configure: exit 0