# Makefile.in generated by automake 1.99a from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2015 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Copyright (C) 1990-2017 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Copyright 1997-2017 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # # Copyright (C) 2002-2017 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # This file is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this file. If not, see . # # As a special exception to the GNU General Public License, # this file may be distributed as part of a program that # contains a configuration script generated by Autoconf, under # the same distribution terms as the rest of that program. # # Generated by gnulib-tool. # Reproduce by: gnulib-tool --import --local-dir=gl --lib=libsed --source-base=lib --m4-base=m4 --doc-base=doc --tests-base=gnulib-tests --aux-dir=build-aux --with-tests --avoid=lock-tests --makefile-name=gnulib.mk --no-conditional-dependencies --no-libtool --macro-prefix=gl acl alloca btowc c-ctype closeout dfa extensions fdl fwriting getdelim getopt gettext-h git-version-gen gitlog-to-changelog ignore-value localcharset manywarnings mbrlen mbrtowc mbsinit memchr memrchr mkostemp non-recursive-gnulib-prefix-hack obstack progname readme-release regex rename selinux-h ssize_t stat-macros stdalign stdbool strerror strverscmp threadlib unlocked-io update-copyright verify version-etc-fsf wcrtomb wctob # Copyright (C) 2016-2017 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Copyright (C) 2016-2017 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . # Copyright (C) 2016-2017 Free Software Foundation, Inc. # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program. If not, see . am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/sed pkgincludedir = $(includedir)/sed pkglibdir = $(libdir)/sed am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = x86_64-pc-linux-gnu bin_PROGRAMS = sed/sed$(EXEEXT) am__append_1 = testsuite/follow-symlinks.sh \ testsuite/follow-symlinks-stdin.sh check_PROGRAMS = testsuite/get-mb-cur-max$(EXEEXT) \ testsuite/test-mbrtowc$(EXEEXT) $(am__EXEEXT_1) #am__append_2 = testsuite/bug-regex7 \ # testsuite/bug-regex8 testsuite/bug-regex9 testsuite/bug-regex10 \ # testsuite/bug-regex11 testsuite/bug-regex12 testsuite/bug-regex13 \ # testsuite/bug-regex14 testsuite/bug-regex15 testsuite/bug-regex16 \ # testsuite/bug-regex21 testsuite/bug-regex27 testsuite/bug-regex28 \ # testsuite/tst-pcre testsuite/tst-boost testsuite/runtests \ # testsuite/runptests testsuite/tst-rxspencer testsuite/tst-regex2 #am__append_3 = space subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/00gnulib.m4 \ $(top_srcdir)/m4/absolute-header.m4 $(top_srcdir)/m4/acl.m4 \ $(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/assert.m4 \ $(top_srcdir)/m4/btowc.m4 $(top_srcdir)/m4/builtin-expect.m4 \ $(top_srcdir)/m4/canonicalize.m4 \ $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/close.m4 \ $(top_srcdir)/m4/closedir.m4 $(top_srcdir)/m4/closeout.m4 \ $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/configmake.m4 \ $(top_srcdir)/m4/ctype.m4 $(top_srcdir)/m4/dirent_h.m4 \ $(top_srcdir)/m4/dirfd.m4 $(top_srcdir)/m4/dirname.m4 \ $(top_srcdir)/m4/double-slash-root.m4 $(top_srcdir)/m4/dup2.m4 \ $(top_srcdir)/m4/eealloc.m4 $(top_srcdir)/m4/environ.m4 \ $(top_srcdir)/m4/errno_h.m4 $(top_srcdir)/m4/error.m4 \ $(top_srcdir)/m4/extensions.m4 \ $(top_srcdir)/m4/extern-inline.m4 $(top_srcdir)/m4/fcntl-o.m4 \ $(top_srcdir)/m4/fcntl_h.m4 $(top_srcdir)/m4/fdopen.m4 \ $(top_srcdir)/m4/fflush.m4 $(top_srcdir)/m4/flexmember.m4 \ $(top_srcdir)/m4/fpending.m4 $(top_srcdir)/m4/fpurge.m4 \ $(top_srcdir)/m4/freading.m4 $(top_srcdir)/m4/fseek.m4 \ $(top_srcdir)/m4/fseeko.m4 $(top_srcdir)/m4/fstat.m4 \ $(top_srcdir)/m4/ftell.m4 $(top_srcdir)/m4/ftello.m4 \ $(top_srcdir)/m4/fwriting.m4 $(top_srcdir)/m4/getcwd.m4 \ $(top_srcdir)/m4/getdelim.m4 $(top_srcdir)/m4/getdtablesize.m4 \ $(top_srcdir)/m4/getopt.m4 $(top_srcdir)/m4/getpagesize.m4 \ $(top_srcdir)/m4/getprogname.m4 $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/gettimeofday.m4 $(top_srcdir)/m4/glibc21.m4 \ $(top_srcdir)/m4/gnulib-common.m4 \ $(top_srcdir)/m4/gnulib-comp.m4 \ $(top_srcdir)/m4/hard-locale.m4 $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/include_next.m4 \ $(top_srcdir)/m4/intlmacosx.m4 \ $(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \ $(top_srcdir)/m4/isblank.m4 $(top_srcdir)/m4/langinfo_h.m4 \ $(top_srcdir)/m4/largefile.m4 $(top_srcdir)/m4/lcmessage.m4 \ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/limits-h.m4 \ $(top_srcdir)/m4/link.m4 $(top_srcdir)/m4/localcharset.m4 \ $(top_srcdir)/m4/locale-fr.m4 $(top_srcdir)/m4/locale-ja.m4 \ $(top_srcdir)/m4/locale-tr.m4 $(top_srcdir)/m4/locale-zh.m4 \ $(top_srcdir)/m4/locale_h.m4 $(top_srcdir)/m4/localeconv.m4 \ $(top_srcdir)/m4/localename.m4 $(top_srcdir)/m4/lock.m4 \ $(top_srcdir)/m4/longlong.m4 $(top_srcdir)/m4/lseek.m4 \ $(top_srcdir)/m4/lstat.m4 $(top_srcdir)/m4/malloc.m4 \ $(top_srcdir)/m4/malloca.m4 $(top_srcdir)/m4/manywarnings.m4 \ $(top_srcdir)/m4/mbrlen.m4 $(top_srcdir)/m4/mbrtowc.m4 \ $(top_srcdir)/m4/mbsinit.m4 $(top_srcdir)/m4/mbstate_t.m4 \ $(top_srcdir)/m4/mbtowc.m4 $(top_srcdir)/m4/memchr.m4 \ $(top_srcdir)/m4/memrchr.m4 $(top_srcdir)/m4/minmax.m4 \ $(top_srcdir)/m4/mkostemp.m4 $(top_srcdir)/m4/mmap-anon.m4 \ $(top_srcdir)/m4/mode_t.m4 $(top_srcdir)/m4/msvc-inval.m4 \ $(top_srcdir)/m4/msvc-nothrow.m4 $(top_srcdir)/m4/multiarch.m4 \ $(top_srcdir)/m4/nl_langinfo.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/nocrash.m4 \ $(top_srcdir)/m4/non-recursive-gnulib-prefix-hack.m4 \ $(top_srcdir)/m4/obstack.m4 $(top_srcdir)/m4/off_t.m4 \ $(top_srcdir)/m4/open.m4 $(top_srcdir)/m4/opendir.m4 \ $(top_srcdir)/m4/pathmax.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 \ $(top_srcdir)/m4/pthread_rwlock_rdlock.m4 \ $(top_srcdir)/m4/putenv.m4 $(top_srcdir)/m4/quote.m4 \ $(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/read-file.m4 \ $(top_srcdir)/m4/readdir.m4 $(top_srcdir)/m4/readlink.m4 \ $(top_srcdir)/m4/realloc.m4 $(top_srcdir)/m4/regex.m4 \ $(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/rmdir.m4 \ $(top_srcdir)/m4/secure_getenv.m4 \ $(top_srcdir)/m4/selinux-context-h.m4 \ $(top_srcdir)/m4/selinux-selinux-h.m4 \ $(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/setlocale.m4 \ $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stat.m4 \ $(top_srcdir)/m4/std-gnu11.m4 $(top_srcdir)/m4/stdalign.m4 \ $(top_srcdir)/m4/stdarg.m4 $(top_srcdir)/m4/stdbool.m4 \ $(top_srcdir)/m4/stddef_h.m4 $(top_srcdir)/m4/stdint.m4 \ $(top_srcdir)/m4/stdio_h.m4 $(top_srcdir)/m4/stdlib_h.m4 \ $(top_srcdir)/m4/strdup.m4 $(top_srcdir)/m4/strerror.m4 \ $(top_srcdir)/m4/string_h.m4 $(top_srcdir)/m4/strverscmp.m4 \ $(top_srcdir)/m4/symlink.m4 $(top_srcdir)/m4/sys_socket_h.m4 \ $(top_srcdir)/m4/sys_stat_h.m4 $(top_srcdir)/m4/sys_time_h.m4 \ $(top_srcdir)/m4/sys_types_h.m4 $(top_srcdir)/m4/tempname.m4 \ $(top_srcdir)/m4/threadlib.m4 $(top_srcdir)/m4/time_h.m4 \ $(top_srcdir)/m4/ungetc.m4 $(top_srcdir)/m4/unistd_h.m4 \ $(top_srcdir)/m4/unlocked-io.m4 \ $(top_srcdir)/m4/version-etc.m4 \ $(top_srcdir)/m4/warn-on-use.m4 $(top_srcdir)/m4/warnings.m4 \ $(top_srcdir)/m4/wchar_h.m4 $(top_srcdir)/m4/wchar_t.m4 \ $(top_srcdir)/m4/wcrtomb.m4 $(top_srcdir)/m4/wctob.m4 \ $(top_srcdir)/m4/wctomb.m4 $(top_srcdir)/m4/wctype_h.m4 \ $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ $(am__configure_deps) $(srcdir)/doc/version.texi \ $(srcdir)/doc/stamp-vti $(dist_noinst_DATA) $(noinst_HEADERS) \ $(am__DIST_COMMON) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = LIBRARIES = $(noinst_LIBRARIES) AM_V_AR = $(am__v_AR_$(V)) am__v_AR_ = $(am__v_AR_$(AM_DEFAULT_VERBOSITY)) am__v_AR_0 = @echo " AR " $@; am__v_AR_1 = lib_libsed_a_AR = $(AR) $(ARFLAGS) am__DEPENDENCIES_1 = LIBOBJDIR = lib/ am__dirstamp = .dirstamp am_lib_libsed_a_OBJECTS = lib/copy-acl.$(OBJEXT) lib/set-acl.$(OBJEXT) \ lib/acl-errno-valid.$(OBJEXT) lib/acl-internal.$(OBJEXT) \ lib/get-permissions.$(OBJEXT) lib/set-permissions.$(OBJEXT) \ lib/c-ctype.$(OBJEXT) lib/c-strcasecmp.$(OBJEXT) \ lib/c-strncasecmp.$(OBJEXT) lib/close-stream.$(OBJEXT) \ lib/closeout.$(OBJEXT) lib/dfa.$(OBJEXT) \ lib/localeinfo.$(OBJEXT) lib/dirname-lgpl.$(OBJEXT) \ lib/basename-lgpl.$(OBJEXT) lib/stripslash.$(OBJEXT) \ lib/exitfail.$(OBJEXT) lib/getprogname.$(OBJEXT) \ lib/hard-locale.$(OBJEXT) lib/localcharset.$(OBJEXT) \ lib/glthread/lock.$(OBJEXT) lib/malloca.$(OBJEXT) \ lib/progname.$(OBJEXT) lib/qcopy-acl.$(OBJEXT) \ lib/qset-acl.$(OBJEXT) lib/quotearg.$(OBJEXT) \ lib/se-context.$(OBJEXT) lib/se-selinux.$(OBJEXT) \ lib/tempname.$(OBJEXT) lib/glthread/threadlib.$(OBJEXT) \ lib/unistd.$(OBJEXT) lib/version-etc.$(OBJEXT) \ lib/version-etc-fsf.$(OBJEXT) lib/wctype-h.$(OBJEXT) \ lib/xmalloc.$(OBJEXT) lib/xalloc-die.$(OBJEXT) lib_libsed_a_OBJECTS = $(am_lib_libsed_a_OBJECTS) sed_libver_a_AR = $(AR) $(ARFLAGS) sed_libver_a_LIBADD = nodist_sed_libver_a_OBJECTS = sed/version.$(OBJEXT) sed_libver_a_OBJECTS = $(nodist_sed_libver_a_OBJECTS) am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \ "$(DESTDIR)$(man1dir)" #am__EXEEXT_1 = testsuite/bug-regex7$(EXEEXT) \ # testsuite/bug-regex8$(EXEEXT) \ # testsuite/bug-regex9$(EXEEXT) \ # testsuite/bug-regex10$(EXEEXT) \ # testsuite/bug-regex11$(EXEEXT) \ # testsuite/bug-regex12$(EXEEXT) \ # testsuite/bug-regex13$(EXEEXT) \ # testsuite/bug-regex14$(EXEEXT) \ # testsuite/bug-regex15$(EXEEXT) \ # testsuite/bug-regex16$(EXEEXT) \ # testsuite/bug-regex21$(EXEEXT) \ # testsuite/bug-regex27$(EXEEXT) \ # testsuite/bug-regex28$(EXEEXT) \ # testsuite/tst-pcre$(EXEEXT) \ # testsuite/tst-boost$(EXEEXT) \ # testsuite/runtests$(EXEEXT) \ # testsuite/runptests$(EXEEXT) \ # testsuite/tst-rxspencer$(EXEEXT) \ # testsuite/tst-regex2$(EXEEXT) PROGRAMS = $(bin_PROGRAMS) am_sed_sed_OBJECTS = sed/sed_sed-compile.$(OBJEXT) \ sed/sed_sed-execute.$(OBJEXT) sed/sed_sed-mbcs.$(OBJEXT) \ sed/sed_sed-regexp.$(OBJEXT) sed/sed_sed-sed.$(OBJEXT) \ sed/sed_sed-utils.$(OBJEXT) sed_sed_OBJECTS = $(am_sed_sed_OBJECTS) sed_sed_LINK = $(CCLD) $(sed_sed_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ $(LDFLAGS) -o $@ testsuite_bug_regex10_SOURCES = testsuite/bug-regex10.c testsuite_bug_regex10_OBJECTS = testsuite/bug-regex10.$(OBJEXT) testsuite_bug_regex10_LDADD = $(LDADD) testsuite_bug_regex11_SOURCES = testsuite/bug-regex11.c testsuite_bug_regex11_OBJECTS = testsuite/bug-regex11.$(OBJEXT) testsuite_bug_regex11_LDADD = $(LDADD) testsuite_bug_regex12_SOURCES = testsuite/bug-regex12.c testsuite_bug_regex12_OBJECTS = testsuite/bug-regex12.$(OBJEXT) testsuite_bug_regex12_LDADD = $(LDADD) testsuite_bug_regex13_SOURCES = testsuite/bug-regex13.c testsuite_bug_regex13_OBJECTS = testsuite/bug-regex13.$(OBJEXT) testsuite_bug_regex13_LDADD = $(LDADD) testsuite_bug_regex14_SOURCES = testsuite/bug-regex14.c testsuite_bug_regex14_OBJECTS = testsuite/bug-regex14.$(OBJEXT) testsuite_bug_regex14_LDADD = $(LDADD) testsuite_bug_regex15_SOURCES = testsuite/bug-regex15.c testsuite_bug_regex15_OBJECTS = testsuite/bug-regex15.$(OBJEXT) testsuite_bug_regex15_LDADD = $(LDADD) testsuite_bug_regex16_SOURCES = testsuite/bug-regex16.c testsuite_bug_regex16_OBJECTS = testsuite/bug-regex16.$(OBJEXT) testsuite_bug_regex16_LDADD = $(LDADD) testsuite_bug_regex21_SOURCES = testsuite/bug-regex21.c testsuite_bug_regex21_OBJECTS = testsuite/bug-regex21.$(OBJEXT) testsuite_bug_regex21_LDADD = $(LDADD) testsuite_bug_regex27_SOURCES = testsuite/bug-regex27.c testsuite_bug_regex27_OBJECTS = testsuite/bug-regex27.$(OBJEXT) testsuite_bug_regex27_LDADD = $(LDADD) testsuite_bug_regex28_SOURCES = testsuite/bug-regex28.c testsuite_bug_regex28_OBJECTS = testsuite/bug-regex28.$(OBJEXT) testsuite_bug_regex28_LDADD = $(LDADD) testsuite_bug_regex7_SOURCES = testsuite/bug-regex7.c testsuite_bug_regex7_OBJECTS = testsuite/bug-regex7.$(OBJEXT) testsuite_bug_regex7_LDADD = $(LDADD) testsuite_bug_regex8_SOURCES = testsuite/bug-regex8.c testsuite_bug_regex8_OBJECTS = testsuite/bug-regex8.$(OBJEXT) testsuite_bug_regex8_LDADD = $(LDADD) testsuite_bug_regex9_SOURCES = testsuite/bug-regex9.c testsuite_bug_regex9_OBJECTS = testsuite/bug-regex9.$(OBJEXT) testsuite_bug_regex9_LDADD = $(LDADD) testsuite_get_mb_cur_max_SOURCES = testsuite/get-mb-cur-max.c testsuite_get_mb_cur_max_OBJECTS = testsuite/get-mb-cur-max.$(OBJEXT) testsuite_get_mb_cur_max_DEPENDENCIES = lib/libsed.a \ $(am__DEPENDENCIES_1) testsuite_runptests_SOURCES = testsuite/runptests.c testsuite_runptests_OBJECTS = testsuite/runptests.$(OBJEXT) testsuite_runptests_LDADD = $(LDADD) testsuite_runtests_SOURCES = testsuite/runtests.c testsuite_runtests_OBJECTS = testsuite/runtests.$(OBJEXT) testsuite_runtests_LDADD = $(LDADD) testsuite_test_mbrtowc_SOURCES = testsuite/test-mbrtowc.c testsuite_test_mbrtowc_OBJECTS = testsuite/test-mbrtowc.$(OBJEXT) testsuite_test_mbrtowc_DEPENDENCIES = lib/libsed.a \ $(am__DEPENDENCIES_1) testsuite_tst_boost_SOURCES = testsuite/tst-boost.c testsuite_tst_boost_OBJECTS = testsuite/tst-boost.$(OBJEXT) testsuite_tst_boost_LDADD = $(LDADD) testsuite_tst_pcre_SOURCES = testsuite/tst-pcre.c testsuite_tst_pcre_OBJECTS = testsuite/tst-pcre.$(OBJEXT) testsuite_tst_pcre_LDADD = $(LDADD) testsuite_tst_regex2_SOURCES = testsuite/tst-regex2.c testsuite_tst_regex2_OBJECTS = testsuite/tst-regex2.$(OBJEXT) testsuite_tst_regex2_LDADD = $(LDADD) testsuite_tst_rxspencer_SOURCES = testsuite/tst-rxspencer.c testsuite_tst_rxspencer_OBJECTS = testsuite/tst-rxspencer.$(OBJEXT) testsuite_tst_rxspencer_LDADD = $(LDADD) AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I. depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp am__maybe_remake_depfiles = depfiles am__depfiles_remade = lib/$(DEPDIR)/acl-errno-valid.Po \ lib/$(DEPDIR)/acl-internal.Po lib/$(DEPDIR)/acl_entries.Po \ lib/$(DEPDIR)/alloca.Po lib/$(DEPDIR)/basename-lgpl.Po \ lib/$(DEPDIR)/btowc.Po lib/$(DEPDIR)/c-ctype.Po \ lib/$(DEPDIR)/c-strcasecmp.Po lib/$(DEPDIR)/c-strncasecmp.Po \ lib/$(DEPDIR)/canonicalize-lgpl.Po \ lib/$(DEPDIR)/close-stream.Po lib/$(DEPDIR)/closeout.Po \ lib/$(DEPDIR)/copy-acl.Po lib/$(DEPDIR)/dfa.Po \ lib/$(DEPDIR)/dirname-lgpl.Po lib/$(DEPDIR)/error.Po \ lib/$(DEPDIR)/exitfail.Po lib/$(DEPDIR)/fpending.Po \ lib/$(DEPDIR)/fstat.Po lib/$(DEPDIR)/fwriting.Po \ lib/$(DEPDIR)/get-permissions.Po lib/$(DEPDIR)/getdelim.Po \ lib/$(DEPDIR)/getfilecon.Po lib/$(DEPDIR)/getopt.Po \ lib/$(DEPDIR)/getopt1.Po lib/$(DEPDIR)/getprogname.Po \ lib/$(DEPDIR)/gettimeofday.Po lib/$(DEPDIR)/hard-locale.Po \ lib/$(DEPDIR)/isblank.Po lib/$(DEPDIR)/localcharset.Po \ lib/$(DEPDIR)/localeconv.Po lib/$(DEPDIR)/localeinfo.Po \ lib/$(DEPDIR)/lstat.Po lib/$(DEPDIR)/malloc.Po \ lib/$(DEPDIR)/malloca.Po lib/$(DEPDIR)/mbrlen.Po \ lib/$(DEPDIR)/mbrtowc.Po lib/$(DEPDIR)/mbsinit.Po \ lib/$(DEPDIR)/mbtowc.Po lib/$(DEPDIR)/memchr.Po \ lib/$(DEPDIR)/memrchr.Po lib/$(DEPDIR)/mkostemp.Po \ lib/$(DEPDIR)/msvc-inval.Po lib/$(DEPDIR)/msvc-nothrow.Po \ lib/$(DEPDIR)/nl_langinfo.Po lib/$(DEPDIR)/obstack.Po \ lib/$(DEPDIR)/progname.Po lib/$(DEPDIR)/qcopy-acl.Po \ lib/$(DEPDIR)/qset-acl.Po lib/$(DEPDIR)/quotearg.Po \ lib/$(DEPDIR)/readlink.Po lib/$(DEPDIR)/regcomp.Po \ lib/$(DEPDIR)/regex.Po lib/$(DEPDIR)/regex_internal.Po \ lib/$(DEPDIR)/regexec.Po lib/$(DEPDIR)/rename.Po \ lib/$(DEPDIR)/rmdir.Po lib/$(DEPDIR)/se-context.Po \ lib/$(DEPDIR)/se-selinux.Po lib/$(DEPDIR)/secure_getenv.Po \ lib/$(DEPDIR)/set-acl.Po lib/$(DEPDIR)/set-permissions.Po \ lib/$(DEPDIR)/stat.Po lib/$(DEPDIR)/strerror-override.Po \ lib/$(DEPDIR)/strerror.Po lib/$(DEPDIR)/stripslash.Po \ lib/$(DEPDIR)/strverscmp.Po lib/$(DEPDIR)/tempname.Po \ lib/$(DEPDIR)/unistd.Po lib/$(DEPDIR)/version-etc-fsf.Po \ lib/$(DEPDIR)/version-etc.Po lib/$(DEPDIR)/wcrtomb.Po \ lib/$(DEPDIR)/wctob.Po lib/$(DEPDIR)/wctomb.Po \ lib/$(DEPDIR)/wctype-h.Po lib/$(DEPDIR)/xalloc-die.Po \ lib/$(DEPDIR)/xmalloc.Po lib/glthread/$(DEPDIR)/lock.Po \ lib/glthread/$(DEPDIR)/threadlib.Po \ sed/$(DEPDIR)/sed_sed-compile.Po \ sed/$(DEPDIR)/sed_sed-execute.Po sed/$(DEPDIR)/sed_sed-mbcs.Po \ sed/$(DEPDIR)/sed_sed-regexp.Po sed/$(DEPDIR)/sed_sed-sed.Po \ sed/$(DEPDIR)/sed_sed-utils.Po sed/$(DEPDIR)/version.Po \ testsuite/$(DEPDIR)/bug-regex10.Po \ testsuite/$(DEPDIR)/bug-regex11.Po \ testsuite/$(DEPDIR)/bug-regex12.Po \ testsuite/$(DEPDIR)/bug-regex13.Po \ testsuite/$(DEPDIR)/bug-regex14.Po \ testsuite/$(DEPDIR)/bug-regex15.Po \ testsuite/$(DEPDIR)/bug-regex16.Po \ testsuite/$(DEPDIR)/bug-regex21.Po \ testsuite/$(DEPDIR)/bug-regex27.Po \ testsuite/$(DEPDIR)/bug-regex28.Po \ testsuite/$(DEPDIR)/bug-regex7.Po \ testsuite/$(DEPDIR)/bug-regex8.Po \ testsuite/$(DEPDIR)/bug-regex9.Po \ testsuite/$(DEPDIR)/get-mb-cur-max.Po \ testsuite/$(DEPDIR)/runptests.Po \ testsuite/$(DEPDIR)/runtests.Po \ testsuite/$(DEPDIR)/test-mbrtowc.Po \ testsuite/$(DEPDIR)/tst-boost.Po \ testsuite/$(DEPDIR)/tst-pcre.Po \ testsuite/$(DEPDIR)/tst-regex2.Po \ testsuite/$(DEPDIR)/tst-rxspencer.Po am__mv = mv -f am__set_depbase = depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.[^.]*$$||'` AM_V_lt = $(am__v_lt_$(V)) am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) am__v_lt_0 = --silent am__v_lt_1 = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_$(V)) am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) am__v_CC_0 = @echo " CC " $@; am__v_CC_1 = CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_$(V)) am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) am__v_CCLD_0 = @echo " CCLD " $@; am__v_CCLD_1 = SOURCES = $(lib_libsed_a_SOURCES) $(EXTRA_lib_libsed_a_SOURCES) \ $(nodist_sed_libver_a_SOURCES) $(sed_sed_SOURCES) \ testsuite/bug-regex10.c testsuite/bug-regex11.c \ testsuite/bug-regex12.c testsuite/bug-regex13.c \ testsuite/bug-regex14.c testsuite/bug-regex15.c \ testsuite/bug-regex16.c testsuite/bug-regex21.c \ testsuite/bug-regex27.c testsuite/bug-regex28.c \ testsuite/bug-regex7.c testsuite/bug-regex8.c \ testsuite/bug-regex9.c testsuite/get-mb-cur-max.c \ testsuite/runptests.c testsuite/runtests.c \ testsuite/test-mbrtowc.c testsuite/tst-boost.c \ testsuite/tst-pcre.c testsuite/tst-regex2.c \ testsuite/tst-rxspencer.c DIST_SOURCES = $(lib_libsed_a_SOURCES) $(EXTRA_lib_libsed_a_SOURCES) \ $(sed_sed_SOURCES) testsuite/bug-regex10.c \ testsuite/bug-regex11.c testsuite/bug-regex12.c \ testsuite/bug-regex13.c testsuite/bug-regex14.c \ testsuite/bug-regex15.c testsuite/bug-regex16.c \ testsuite/bug-regex21.c testsuite/bug-regex27.c \ testsuite/bug-regex28.c testsuite/bug-regex7.c \ testsuite/bug-regex8.c testsuite/bug-regex9.c \ testsuite/get-mb-cur-max.c testsuite/runptests.c \ testsuite/runtests.c testsuite/test-mbrtowc.c \ testsuite/tst-boost.c testsuite/tst-pcre.c \ testsuite/tst-regex2.c testsuite/tst-rxspencer.c AM_V_DVIPS = $(am__v_DVIPS_$(V)) am__v_DVIPS_ = $(am__v_DVIPS_$(AM_DEFAULT_VERBOSITY)) am__v_DVIPS_0 = @echo " DVIPS " $@; am__v_DVIPS_1 = AM_V_MAKEINFO = $(am__v_MAKEINFO_$(V)) am__v_MAKEINFO_ = $(am__v_MAKEINFO_$(AM_DEFAULT_VERBOSITY)) am__v_MAKEINFO_0 = @echo " MAKEINFO" $@; am__v_MAKEINFO_1 = AM_V_INFOHTML = $(am__v_INFOHTML_$(V)) am__v_INFOHTML_ = $(am__v_INFOHTML_$(AM_DEFAULT_VERBOSITY)) am__v_INFOHTML_0 = @echo " INFOHTML" $@; am__v_INFOHTML_1 = AM_V_TEXI2DVI = $(am__v_TEXI2DVI_$(V)) am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_$(AM_DEFAULT_VERBOSITY)) am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@; am__v_TEXI2DVI_1 = AM_V_TEXI2PDF = $(am__v_TEXI2PDF_$(V)) am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_$(AM_DEFAULT_VERBOSITY)) am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@; am__v_TEXI2PDF_1 = AM_V_texinfo = $(am__v_texinfo_$(V)) am__v_texinfo_ = $(am__v_texinfo_$(AM_DEFAULT_VERBOSITY)) am__v_texinfo_0 = -q am__v_texinfo_1 = AM_V_texidevnull = $(am__v_texidevnull_$(V)) am__v_texidevnull_ = $(am__v_texidevnull_$(AM_DEFAULT_VERBOSITY)) am__v_texidevnull_0 = > /dev/null am__v_texidevnull_1 = INFO_DEPS = $(srcdir)/doc/sed.info TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux DVIS = doc/sed.dvi PDFS = doc/sed.pdf PSS = doc/sed.ps HTMLS = doc/sed.html TEXINFOS = doc/sed.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html DVIPS = dvips RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ ctags-recursive dvi-recursive html-recursive info-recursive \ install-data-recursive install-dvi-recursive \ install-exec-recursive install-html-recursive \ install-info-recursive install-pdf-recursive \ install-ps-recursive install-recursive installcheck-recursive \ installdirs-recursive pdf-recursive ps-recursive \ tags-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 NROFF = nroff MANS = $(dist_man_MANS) DATA = $(dist_noinst_DATA) $(noinst_DATA) HEADERS = $(noinst_HEADERS) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ cscope check recheck distdir dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config_h.in # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope am__tty_colors_dummy = \ mgn= red= grn= lgn= blu= brg= std=; \ am__color_tests=no am__tty_colors = { \ $(am__tty_colors_dummy); \ if test "X$(AM_COLOR_TESTS)" = Xno; then \ am__color_tests=no; \ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ am__color_tests=yes; \ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ am__color_tests=yes; \ fi; \ if test $$am__color_tests = yes; then \ red=''; \ grn=''; \ lgn=''; \ blu=''; \ mgn=''; \ brg=''; \ std=''; \ fi; \ } am__recheck_rx = ^[ ]*:recheck:[ ]* am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* # A command that, given a newline-separated list of test names on the # standard input, print the name of the tests that are to be re-run # upon "make recheck". am__list_recheck_tests = $(AWK) '{ \ recheck = 1; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ { \ if ((getline line2 < ($$0 ".log")) < 0) \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ { \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ { \ break; \ } \ }; \ if (recheck) \ print $$0; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # A command that, given a newline-separated list of test names on the # standard input, create the global log from their .trs and .log files. am__create_global_log = $(AWK) ' \ function fatal(msg) \ { \ print "fatal: making $@: " msg | "cat >&2"; \ exit 1; \ } \ function rst_section(header) \ { \ print header; \ len = length(header); \ for (i = 1; i <= len; i = i + 1) \ printf "="; \ printf "\n\n"; \ } \ { \ copy_in_global_log = 1; \ global_test_result = "RUN"; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".trs"); \ if (line ~ /$(am__global_test_result_rx)/) \ { \ sub("$(am__global_test_result_rx)", "", line); \ sub("[ ]*$$", "", line); \ global_test_result = line; \ } \ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ copy_in_global_log = 0; \ }; \ if (copy_in_global_log) \ { \ rst_section(global_test_result ": " $$0); \ while ((rc = (getline line < ($$0 ".log"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".log"); \ print line; \ }; \ printf "\n"; \ }; \ close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # Restructured Text title. am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } # Solaris 10 'make', and several other traditional 'make' implementations, # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it # by disabling -e (using the XSI extension "set +e") if it's set. am__sh_e_setup = case $$- in *e*) set +e;; esac # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the # directory for the log if needed. Stores in $dir the directory # containing $f, in $tst the test, in $log the log. Executes the # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and # passes TESTS_ENVIRONMENT. Set up options for the wrapper that # will run the test scripts (or their associated LOG_COMPILER, if # thy have one). am__check_pre = \ $(am__sh_e_setup); \ $(am__vpath_adj_setup) $(am__vpath_adj) \ $(am__tty_colors); \ srcdir=$(srcdir); export srcdir; \ case "$@" in \ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ *) am__odir=.;; \ esac; \ test "x$$am__odir" = x"." || test -d "$$am__odir" \ || $(MKDIR_P) "$$am__odir" || exit $$?; \ if test -f "./$$f"; then dir=./; \ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ am__enable_hard_errors=yes; \ fi; \ case " $(XFAIL_TESTS) " in \ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ am__expect_failure=yes;; \ *) \ am__expect_failure=no;; \ esac; \ $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) # A shell command to get the names of the tests scripts with any registered # extension removed (i.e., equivalently, the names of the test logs, with # the '.log' extension removed). The result is saved in the shell variable # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", # since that might cause problem with VPATH rewrites for suffix-less tests. # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. am__set_TESTS_bases = \ bases='$(TEST_LOGS)'; \ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ bases=`echo $$bases` RECHECK_LOGS = $(TEST_LOGS) TEST_SUITE_LOG = test-suite.log LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) am__set_b = \ case '$@' in \ */*) \ case '$*' in \ */*) b='$*';; \ *) b=`echo '$@' | sed 's/\.log$$//'`; \ esac;; \ *) \ b='$*';; \ esac am__test_logs1 = $(TESTS:=.log) am__test_logs2 = $(am__test_logs1:.log=.log) TEST_LOGS = $(am__test_logs2:.sh.log=.log) SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/build-aux/test-driver SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(dist_man_MANS) $(doc_sed_TEXINFOS) \ $(srcdir)/Makefile.in $(srcdir)/config_h.in \ $(srcdir)/lib/gnulib.mk $(top_srcdir)/build-aux/ar-lib \ $(top_srcdir)/build-aux/config.guess \ $(top_srcdir)/build-aux/config.rpath \ $(top_srcdir)/build-aux/config.sub \ $(top_srcdir)/build-aux/depcomp \ $(top_srcdir)/build-aux/install-sh \ $(top_srcdir)/build-aux/mdate-sh \ $(top_srcdir)/build-aux/missing \ $(top_srcdir)/build-aux/test-driver \ $(top_srcdir)/build-aux/texinfo.tex $(top_srcdir)/doc/local.mk \ $(top_srcdir)/lib/alloca.c $(top_srcdir)/lib/local.mk \ $(top_srcdir)/sed/local.mk $(top_srcdir)/testsuite/local.mk \ ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS \ build-aux/ar-lib build-aux/compile build-aux/config.guess \ build-aux/config.rpath build-aux/config.sub build-aux/depcomp \ build-aux/install-sh build-aux/mdate-sh build-aux/missing \ build-aux/texinfo.tex DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) am__relativize = \ dir0=`pwd`; \ sed_first='s,^\([^/]*\)/.*$$,\1,'; \ sed_rest='s,^[^/]*/*,,'; \ sed_last='s,^.*/\([^/]*\)$$,\1,'; \ sed_butlast='s,/*[^/]*$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" | sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" GZIP_ENV = --best DIST_ARCHIVES = $(distdir).tar.xz DIST_TARGETS = dist-xz distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print pkglibexecdir = ${libexecdir}/${PACKAGE} ACLOCAL = ${SHELL} /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux/missing aclocal-1.99a ALLOCA = ALLOCA_H = lib/alloca.h AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 APPLE_UNIVERSAL_BUILD = 0 AR = x86_64-pc-linux-gnu-ar ARFLAGS = cr AUTOCONF = ${SHELL} /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux/missing autoconf AUTOHEADER = ${SHELL} /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux/missing autoheader AUTOMAKE = ${SHELL} /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux/missing automake-1.99a AWK = gawk BITSIZEOF_PTRDIFF_T = BITSIZEOF_SIG_ATOMIC_T = BITSIZEOF_SIZE_T = BITSIZEOF_WCHAR_T = BITSIZEOF_WINT_T = CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -O2 -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include CONFIG_INCLUDE = config.h CPP = gcc -E CPPFLAGS = -I/mnt/gold/openwrt/lede/staging_dir/host/include -I/mnt/gold/openwrt/lede/staging_dir/host/usr/include CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO_C = ECHO_N = -n ECHO_T = EGREP = /mnt/gold/openwrt/lede/staging_dir/host/bin/grep -E EMULTIHOP_HIDDEN = EMULTIHOP_VALUE = ENOLINK_HIDDEN = ENOLINK_VALUE = EOVERFLOW_HIDDEN = EOVERFLOW_VALUE = ERRNO_H = EXEEXT = GETOPT_H = GETTEXT_MACRO_VERSION = 0.19 GLIBC21 = yes GMSGFMT = /usr/bin/gmsgfmt GMSGFMT_015 = /usr/bin/gmsgfmt GNULIB_ALPHASORT = 0 GNULIB_ATOLL = 0 GNULIB_BTOWC = 1 GNULIB_CALLOC_POSIX = 0 GNULIB_CANONICALIZE_FILE_NAME = 1 GNULIB_CHDIR = 1 GNULIB_CHOWN = 0 GNULIB_CLOSE = IN_SED_GNULIB_TESTS GNULIB_CLOSEDIR = IN_SED_GNULIB_TESTS GNULIB_DIRFD = IN_SED_GNULIB_TESTS GNULIB_DPRINTF = 0 GNULIB_DUP = 0 GNULIB_DUP2 = IN_SED_GNULIB_TESTS GNULIB_DUP3 = 0 GNULIB_DUPLOCALE = 0 GNULIB_ENVIRON = IN_SED_GNULIB_TESTS GNULIB_EUIDACCESS = 0 GNULIB_FACCESSAT = 0 GNULIB_FCHDIR = 0 GNULIB_FCHMODAT = 0 GNULIB_FCHOWNAT = 0 GNULIB_FCLOSE = 0 GNULIB_FCNTL = 0 GNULIB_FDATASYNC = 0 GNULIB_FDOPEN = IN_SED_GNULIB_TESTS GNULIB_FDOPENDIR = 0 GNULIB_FFLUSH = IN_SED_GNULIB_TESTS GNULIB_FFSL = 0 GNULIB_FFSLL = 0 GNULIB_FGETC = 1 GNULIB_FGETS = 1 GNULIB_FOPEN = 0 GNULIB_FPRINTF = 1 GNULIB_FPRINTF_POSIX = 0 GNULIB_FPURGE = IN_SED_GNULIB_TESTS GNULIB_FPUTC = 1 GNULIB_FPUTS = 1 GNULIB_FREAD = 1 GNULIB_FREOPEN = 0 GNULIB_FSCANF = 1 GNULIB_FSEEK = IN_SED_GNULIB_TESTS GNULIB_FSEEKO = IN_SED_GNULIB_TESTS GNULIB_FSTAT = 1 GNULIB_FSTATAT = 0 GNULIB_FSYNC = 0 GNULIB_FTELL = IN_SED_GNULIB_TESTS GNULIB_FTELLO = IN_SED_GNULIB_TESTS GNULIB_FTRUNCATE = 0 GNULIB_FUTIMENS = 0 GNULIB_FWRITE = 1 GNULIB_GETC = 1 GNULIB_GETCHAR = 1 GNULIB_GETCWD = IN_SED_GNULIB_TESTS GNULIB_GETDELIM = 1 GNULIB_GETDOMAINNAME = 0 GNULIB_GETDTABLESIZE = IN_SED_GNULIB_TESTS GNULIB_GETGROUPS = 0 GNULIB_GETHOSTNAME = 0 GNULIB_GETLINE = 0 GNULIB_GETLOADAVG = 0 GNULIB_GETLOGIN = 0 GNULIB_GETLOGIN_R = 0 GNULIB_GETPAGESIZE = IN_SED_GNULIB_TESTS GNULIB_GETSUBOPT = 0 GNULIB_GETTIMEOFDAY = 1 GNULIB_GETUSERSHELL = 0 GNULIB_GL_UNISTD_H_GETOPT = GNULIB_GRANTPT = 0 GNULIB_GROUP_MEMBER = 0 GNULIB_IMAXABS = 0 GNULIB_IMAXDIV = 0 GNULIB_ISATTY = 0 GNULIB_ISBLANK = 1 GNULIB_ISWBLANK = 0 GNULIB_ISWCTYPE = 0 GNULIB_LCHMOD = 0 GNULIB_LCHOWN = 0 GNULIB_LINK = IN_SED_GNULIB_TESTS GNULIB_LINKAT = 0 GNULIB_LOCALECONV = 1 GNULIB_LSEEK = IN_SED_GNULIB_TESTS GNULIB_LSTAT = 1 GNULIB_MALLOC_POSIX = 1 GNULIB_MBRLEN = 1 GNULIB_MBRTOWC = 1 GNULIB_MBSCASECMP = 0 GNULIB_MBSCASESTR = 0 GNULIB_MBSCHR = 0 GNULIB_MBSCSPN = 0 GNULIB_MBSINIT = 1 GNULIB_MBSLEN = 0 GNULIB_MBSNCASECMP = 0 GNULIB_MBSNLEN = 0 GNULIB_MBSNRTOWCS = 0 GNULIB_MBSPBRK = 0 GNULIB_MBSPCASECMP = 0 GNULIB_MBSRCHR = 0 GNULIB_MBSRTOWCS = 0 GNULIB_MBSSEP = 0 GNULIB_MBSSPN = 0 GNULIB_MBSSTR = 0 GNULIB_MBSTOK_R = 0 GNULIB_MBTOWC = 1 GNULIB_MEMCHR = 1 GNULIB_MEMMEM = 0 GNULIB_MEMPCPY = 0 GNULIB_MEMRCHR = 1 GNULIB_MKDIRAT = 0 GNULIB_MKDTEMP = 0 GNULIB_MKFIFO = 0 GNULIB_MKFIFOAT = 0 GNULIB_MKNOD = 0 GNULIB_MKNODAT = 0 GNULIB_MKOSTEMP = 1 GNULIB_MKOSTEMPS = 0 GNULIB_MKSTEMP = 0 GNULIB_MKSTEMPS = 0 GNULIB_MKTIME = 0 GNULIB_NANOSLEEP = 0 GNULIB_NL_LANGINFO = 1 GNULIB_NONBLOCKING = 0 GNULIB_OBSTACK_PRINTF = 0 GNULIB_OBSTACK_PRINTF_POSIX = 0 GNULIB_OPEN = IN_SED_GNULIB_TESTS GNULIB_OPENAT = 0 GNULIB_OPENDIR = IN_SED_GNULIB_TESTS GNULIB_OVERRIDES_WINT_T = 0 GNULIB_PCLOSE = 0 GNULIB_PERROR = 0 GNULIB_PIPE = 0 GNULIB_PIPE2 = 0 GNULIB_POPEN = 0 GNULIB_POSIX_OPENPT = 0 GNULIB_PREAD = 0 GNULIB_PRINTF = 1 GNULIB_PRINTF_POSIX = 0 GNULIB_PTSNAME = 0 GNULIB_PTSNAME_R = 0 GNULIB_PUTC = 1 GNULIB_PUTCHAR = 1 GNULIB_PUTENV = IN_SED_GNULIB_TESTS GNULIB_PUTS = 1 GNULIB_PWRITE = 0 GNULIB_QSORT_R = 0 GNULIB_RANDOM = 0 GNULIB_RANDOM_R = 0 GNULIB_RAWMEMCHR = 0 GNULIB_READ = 0 GNULIB_READDIR = IN_SED_GNULIB_TESTS GNULIB_READLINK = 1 GNULIB_READLINKAT = 0 GNULIB_REALLOC_POSIX = IN_SED_GNULIB_TESTS GNULIB_REALPATH = 1 GNULIB_REMOVE = 0 GNULIB_RENAME = 1 GNULIB_RENAMEAT = 0 GNULIB_REWINDDIR = 0 GNULIB_RMDIR = 1 GNULIB_RPMATCH = 0 GNULIB_SCANDIR = 0 GNULIB_SCANF = 1 GNULIB_SECURE_GETENV = 1 GNULIB_SETENV = IN_SED_GNULIB_TESTS GNULIB_SETHOSTNAME = 0 GNULIB_SETLOCALE = IN_SED_GNULIB_TESTS GNULIB_SLEEP = 0 GNULIB_SNPRINTF = 0 GNULIB_SPRINTF_POSIX = 0 GNULIB_STAT = 1 GNULIB_STDIO_H_NONBLOCKING = 0 GNULIB_STDIO_H_SIGPIPE = 0 GNULIB_STPCPY = 0 GNULIB_STPNCPY = 0 GNULIB_STRCASESTR = 0 GNULIB_STRCHRNUL = 0 GNULIB_STRDUP = IN_SED_GNULIB_TESTS GNULIB_STRERROR = 1 GNULIB_STRERROR_R = 0 GNULIB_STRNCAT = 0 GNULIB_STRNDUP = 0 GNULIB_STRNLEN = 0 GNULIB_STRPBRK = 0 GNULIB_STRPTIME = 0 GNULIB_STRSEP = 0 GNULIB_STRSIGNAL = 0 GNULIB_STRSTR = 0 GNULIB_STRTOD = 0 GNULIB_STRTOIMAX = 0 GNULIB_STRTOK_R = 0 GNULIB_STRTOLL = 0 GNULIB_STRTOULL = 0 GNULIB_STRTOUMAX = 0 GNULIB_STRVERSCMP = 1 GNULIB_SYMLINK = IN_SED_GNULIB_TESTS GNULIB_SYMLINKAT = 0 GNULIB_SYSTEM_POSIX = 0 GNULIB_TEST_WARN_CFLAGS = GNULIB_TIMEGM = 0 GNULIB_TIME_R = 0 GNULIB_TIME_RZ = 0 GNULIB_TMPFILE = 0 GNULIB_TOWCTRANS = 0 GNULIB_TTYNAME_R = 0 GNULIB_UNISTD_H_NONBLOCKING = 0 GNULIB_UNISTD_H_SIGPIPE = 0 GNULIB_UNLINK = 0 GNULIB_UNLINKAT = 0 GNULIB_UNLOCKPT = 0 GNULIB_UNSETENV = IN_SED_GNULIB_TESTS GNULIB_USLEEP = 0 GNULIB_UTIMENSAT = 0 GNULIB_VASPRINTF = 0 GNULIB_VDPRINTF = 0 GNULIB_VFPRINTF = 1 GNULIB_VFPRINTF_POSIX = 0 GNULIB_VFSCANF = 0 GNULIB_VPRINTF = 1 GNULIB_VPRINTF_POSIX = 0 GNULIB_VSCANF = 0 GNULIB_VSNPRINTF = 0 GNULIB_VSPRINTF_POSIX = 0 GNULIB_WCPCPY = 0 GNULIB_WCPNCPY = 0 GNULIB_WCRTOMB = 1 GNULIB_WCSCASECMP = 0 GNULIB_WCSCAT = 0 GNULIB_WCSCHR = 0 GNULIB_WCSCMP = 0 GNULIB_WCSCOLL = 0 GNULIB_WCSCPY = 0 GNULIB_WCSCSPN = 0 GNULIB_WCSDUP = 0 GNULIB_WCSLEN = 0 GNULIB_WCSNCASECMP = 0 GNULIB_WCSNCAT = 0 GNULIB_WCSNCMP = 0 GNULIB_WCSNCPY = 0 GNULIB_WCSNLEN = 0 GNULIB_WCSNRTOMBS = 0 GNULIB_WCSPBRK = 0 GNULIB_WCSRCHR = 0 GNULIB_WCSRTOMBS = 0 GNULIB_WCSSPN = 0 GNULIB_WCSSTR = 0 GNULIB_WCSTOK = 0 GNULIB_WCSWIDTH = 0 GNULIB_WCSXFRM = 0 GNULIB_WCTOB = 1 GNULIB_WCTOMB = 1 GNULIB_WCTRANS = 0 GNULIB_WCTYPE = 0 GNULIB_WCWIDTH = 0 GNULIB_WMEMCHR = 0 GNULIB_WMEMCMP = 0 GNULIB_WMEMCPY = 0 GNULIB_WMEMMOVE = 0 GNULIB_WMEMSET = 0 GNULIB_WRITE = 0 GNULIB__EXIT = 0 GREP = /mnt/gold/openwrt/lede/staging_dir/host/bin/grep HAVE_ALPHASORT = 1 HAVE_ATOLL = 1 HAVE_BTOWC = 1 HAVE_C99_STDINT_H = 1 HAVE_CANONICALIZE_FILE_NAME = 1 HAVE_CHOWN = 1 HAVE_CLOSEDIR = 1 HAVE_DECL_DIRFD = 1 HAVE_DECL_ENVIRON = 1 HAVE_DECL_FCHDIR = 1 HAVE_DECL_FDATASYNC = 1 HAVE_DECL_FDOPENDIR = 1 HAVE_DECL_FPURGE = 0 HAVE_DECL_FSEEKO = 1 HAVE_DECL_FTELLO = 1 HAVE_DECL_GETDELIM = 1 HAVE_DECL_GETDOMAINNAME = 1 HAVE_DECL_GETLINE = 1 HAVE_DECL_GETLOADAVG = 1 HAVE_DECL_GETLOGIN = 1 HAVE_DECL_GETLOGIN_R = 1 HAVE_DECL_GETPAGESIZE = 1 HAVE_DECL_GETUSERSHELL = 1 HAVE_DECL_IMAXABS = 1 HAVE_DECL_IMAXDIV = 1 HAVE_DECL_LOCALTIME_R = 1 HAVE_DECL_MEMMEM = 1 HAVE_DECL_MEMRCHR = 1 HAVE_DECL_OBSTACK_PRINTF = 1 HAVE_DECL_SETENV = 1 HAVE_DECL_SETHOSTNAME = 1 HAVE_DECL_SNPRINTF = 1 HAVE_DECL_STRDUP = 1 HAVE_DECL_STRERROR_R = 1 HAVE_DECL_STRNDUP = 1 HAVE_DECL_STRNLEN = 1 HAVE_DECL_STRSIGNAL = 1 HAVE_DECL_STRTOIMAX = 1 HAVE_DECL_STRTOK_R = 1 HAVE_DECL_STRTOUMAX = 1 HAVE_DECL_TTYNAME_R = 1 HAVE_DECL_UNSETENV = 1 HAVE_DECL_VSNPRINTF = 1 HAVE_DECL_WCTOB = 1 HAVE_DECL_WCWIDTH = 1 HAVE_DIRENT_H = 1 HAVE_DPRINTF = 1 HAVE_DUP2 = 1 HAVE_DUP3 = 1 HAVE_DUPLOCALE = 1 HAVE_EUIDACCESS = 1 HAVE_FACCESSAT = 1 HAVE_FCHDIR = 1 HAVE_FCHMODAT = 1 HAVE_FCHOWNAT = 1 HAVE_FCNTL = 1 HAVE_FDATASYNC = 1 HAVE_FDOPENDIR = 1 HAVE_FEATURES_H = 1 HAVE_FFSL = 1 HAVE_FFSLL = 1 HAVE_FSEEKO = 1 HAVE_FSTATAT = 1 HAVE_FSYNC = 1 HAVE_FTELLO = 1 HAVE_FTRUNCATE = 1 HAVE_FUTIMENS = 1 HAVE_GETDTABLESIZE = 1 HAVE_GETGROUPS = 1 HAVE_GETHOSTNAME = 1 HAVE_GETLOGIN = 1 HAVE_GETOPT_H = 1 HAVE_GETPAGESIZE = 1 HAVE_GETSUBOPT = 1 HAVE_GETTIMEOFDAY = 1 HAVE_GRANTPT = 1 HAVE_GROUP_MEMBER = 1 HAVE_INTTYPES_H = 1 HAVE_ISBLANK = 1 HAVE_ISWBLANK = 1 HAVE_ISWCNTRL = 1 HAVE_LANGINFO_CODESET = 1 HAVE_LANGINFO_ERA = 1 HAVE_LANGINFO_H = 1 HAVE_LANGINFO_T_FMT_AMPM = 1 HAVE_LANGINFO_YESEXPR = 1 HAVE_LCHMOD = 1 HAVE_LCHOWN = 1 HAVE_LINK = 1 HAVE_LINKAT = 1 HAVE_LONG_LONG_INT = 1 HAVE_LSTAT = 1 HAVE_MAX_ALIGN_T = 1 HAVE_MBRLEN = 1 HAVE_MBRTOWC = 1 HAVE_MBSINIT = 1 HAVE_MBSLEN = 0 HAVE_MBSNRTOWCS = 1 HAVE_MBSRTOWCS = 1 HAVE_MEMCHR = 1 HAVE_MEMPCPY = 1 HAVE_MKDIRAT = 1 HAVE_MKDTEMP = 1 HAVE_MKFIFO = 1 HAVE_MKFIFOAT = 1 HAVE_MKNOD = 1 HAVE_MKNODAT = 1 HAVE_MKOSTEMP = 1 HAVE_MKOSTEMPS = 1 HAVE_MKSTEMP = 1 HAVE_MKSTEMPS = 1 HAVE_MSVC_INVALID_PARAMETER_HANDLER = 0 HAVE_NANOSLEEP = 1 HAVE_NL_LANGINFO = 1 HAVE_OPENAT = 1 HAVE_OPENDIR = 1 HAVE_OS_H = 0 HAVE_PCLOSE = 1 HAVE_PIPE = 1 HAVE_PIPE2 = 1 HAVE_POPEN = 1 HAVE_POSIX_OPENPT = 1 HAVE_PREAD = 1 HAVE_PTSNAME = 1 HAVE_PTSNAME_R = 1 HAVE_PWRITE = 1 HAVE_QSORT_R = 1 HAVE_RANDOM = 1 HAVE_RANDOM_H = 1 HAVE_RANDOM_R = 1 HAVE_RAWMEMCHR = 1 HAVE_READDIR = 1 HAVE_READLINK = 1 HAVE_READLINKAT = 1 HAVE_REALPATH = 1 HAVE_RENAMEAT = 1 HAVE_REWINDDIR = 1 HAVE_RPMATCH = 1 HAVE_SCANDIR = 1 HAVE_SECURE_GETENV = 1 HAVE_SETENV = 1 HAVE_SETHOSTNAME = 1 HAVE_SIGNED_SIG_ATOMIC_T = HAVE_SIGNED_WCHAR_T = HAVE_SIGNED_WINT_T = HAVE_SLEEP = 1 HAVE_STDINT_H = 1 HAVE_STPCPY = 1 HAVE_STPNCPY = 1 HAVE_STRCASESTR = 1 HAVE_STRCHRNUL = 1 HAVE_STRPBRK = 1 HAVE_STRPTIME = 1 HAVE_STRSEP = 1 HAVE_STRTOD = 1 HAVE_STRTOLL = 1 HAVE_STRTOULL = 1 HAVE_STRUCT_RANDOM_DATA = 1 HAVE_STRUCT_TIMEVAL = 1 HAVE_STRVERSCMP = 1 HAVE_SYMLINK = 1 HAVE_SYMLINKAT = 1 HAVE_SYS_BITYPES_H = 0 HAVE_SYS_INTTYPES_H = 0 HAVE_SYS_LOADAVG_H = 0 HAVE_SYS_PARAM_H = 0 HAVE_SYS_TIME_H = 1 HAVE_SYS_TYPES_H = 1 HAVE_TIMEGM = 1 HAVE_TIMEZONE_T = 0 HAVE_UNISTD_H = 1 HAVE_UNLINKAT = 1 HAVE_UNLOCKPT = 1 HAVE_UNSIGNED_LONG_LONG_INT = 1 HAVE_USLEEP = 1 HAVE_UTIMENSAT = 1 HAVE_VASPRINTF = 1 HAVE_VDPRINTF = 1 HAVE_WCHAR_H = 1 HAVE_WCHAR_T = 1 HAVE_WCPCPY = 1 HAVE_WCPNCPY = 1 HAVE_WCRTOMB = 1 HAVE_WCSCASECMP = 1 HAVE_WCSCAT = 1 HAVE_WCSCHR = 1 HAVE_WCSCMP = 1 HAVE_WCSCOLL = 1 HAVE_WCSCPY = 1 HAVE_WCSCSPN = 1 HAVE_WCSDUP = 1 HAVE_WCSLEN = 1 HAVE_WCSNCASECMP = 1 HAVE_WCSNCAT = 1 HAVE_WCSNCMP = 1 HAVE_WCSNCPY = 1 HAVE_WCSNLEN = 1 HAVE_WCSNRTOMBS = 1 HAVE_WCSPBRK = 1 HAVE_WCSRCHR = 1 HAVE_WCSRTOMBS = 1 HAVE_WCSSPN = 1 HAVE_WCSSTR = 1 HAVE_WCSTOK = 1 HAVE_WCSWIDTH = 1 HAVE_WCSXFRM = 1 HAVE_WCTRANS_T = 1 HAVE_WCTYPE_H = 1 HAVE_WCTYPE_T = 1 HAVE_WINSOCK2_H = 0 HAVE_WINT_T = 1 HAVE_WMEMCHR = 1 HAVE_WMEMCMP = 1 HAVE_WMEMCPY = 1 HAVE_WMEMMOVE = 1 HAVE_WMEMSET = 1 HAVE_XLOCALE_H = 0 HAVE__BOOL = 1 HAVE__EXIT = 1 INCLUDE_NEXT = include_next INCLUDE_NEXT_AS_FIRST_DIRECTIVE = include_next INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INT32_MAX_LT_INTMAX_MAX = 1 INT64_MAX_EQ_LONG_MAX = 1 INTLLIBS = INTL_MACOSX_LIBS = LDFLAGS = -L/mnt/gold/openwrt/lede/staging_dir/host/lib -L/mnt/gold/openwrt/lede/staging_dir/host/usr/lib LIBICONV = -liconv LIBINTL = LIBMULTITHREAD = LIBOBJS = LIBPTH = LIBPTH_PREFIX = LIBS = LIBSED_LIBDEPS = LIBSED_LTLIBDEPS = LIBTESTS_LIBDEPS = LIBTHREAD = LIB_ACL = LIB_HAS_ACL = LIB_SELINUX = LIMITS_H = lib/limits.h LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(abs_top_builddir)/lib" LOCALE_FR = fr_FR LOCALE_FR_UTF8 = fr_FR.UTF-8 LOCALE_JA = ja_JP LOCALE_TR_UTF8 = tr_TR.UTF-8 LOCALE_ZH_CN = zh_CN.GB18030 LTLIBICONV = -liconv LTLIBINTL = LTLIBMULTITHREAD = LTLIBOBJS = LTLIBPTH = LTLIBTHREAD = MAKEINFO = ${SHELL} /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux/missing makeinfo MKDIR_P = /bin/mkdir -p MSGFMT = /usr/bin/msgfmt MSGFMT_015 = /usr/bin/msgfmt MSGMERGE = /usr/bin/msgmerge NEXT_AS_FIRST_DIRECTIVE_CTYPE_H = NEXT_AS_FIRST_DIRECTIVE_DIRENT_H = NEXT_AS_FIRST_DIRECTIVE_ERRNO_H = NEXT_AS_FIRST_DIRECTIVE_FCNTL_H = NEXT_AS_FIRST_DIRECTIVE_GETOPT_H = NEXT_AS_FIRST_DIRECTIVE_INTTYPES_H = NEXT_AS_FIRST_DIRECTIVE_LANGINFO_H = NEXT_AS_FIRST_DIRECTIVE_LIMITS_H = NEXT_AS_FIRST_DIRECTIVE_LOCALE_H = NEXT_AS_FIRST_DIRECTIVE_SELINUX_SELINUX_H = NEXT_AS_FIRST_DIRECTIVE_STDARG_H = NEXT_AS_FIRST_DIRECTIVE_STDDEF_H = NEXT_AS_FIRST_DIRECTIVE_STDINT_H = NEXT_AS_FIRST_DIRECTIVE_STDIO_H = NEXT_AS_FIRST_DIRECTIVE_STDLIB_H = NEXT_AS_FIRST_DIRECTIVE_STRING_H = NEXT_AS_FIRST_DIRECTIVE_SYS_STAT_H = NEXT_AS_FIRST_DIRECTIVE_SYS_TIME_H = NEXT_AS_FIRST_DIRECTIVE_SYS_TYPES_H = NEXT_AS_FIRST_DIRECTIVE_TIME_H = NEXT_AS_FIRST_DIRECTIVE_UNISTD_H = NEXT_AS_FIRST_DIRECTIVE_WCHAR_H = NEXT_AS_FIRST_DIRECTIVE_WCTYPE_H = NEXT_CTYPE_H = NEXT_DIRENT_H = NEXT_ERRNO_H = NEXT_FCNTL_H = NEXT_GETOPT_H = NEXT_INTTYPES_H = NEXT_LANGINFO_H = NEXT_LIMITS_H = NEXT_LOCALE_H = NEXT_SELINUX_SELINUX_H = NEXT_STDARG_H = NEXT_STDDEF_H = NEXT_STDINT_H = NEXT_STDIO_H = NEXT_STDLIB_H = NEXT_STRING_H = NEXT_SYS_STAT_H = NEXT_SYS_TIME_H = NEXT_SYS_TYPES_H = NEXT_TIME_H = NEXT_UNISTD_H = NEXT_WCHAR_H = NEXT_WCTYPE_H = OBJEXT = o PACKAGE = sed PACKAGE_BUGREPORT = bug-sed@gnu.org PACKAGE_NAME = GNU sed PACKAGE_STRING = GNU sed 4.4 PACKAGE_TARNAME = sed PACKAGE_URL = http://www.gnu.org/software/sed/ PACKAGE_VERSION = 4.4 PATH_SEPARATOR = : PERL = /mnt/gold/openwrt/lede/staging_dir/host/bin/perl POSUB = PRAGMA_COLUMNS = PRAGMA_SYSTEM_HEADER = #pragma GCC system_header PRIPTR_PREFIX = "l" PRI_MACROS_BROKEN = 0 PTHREAD_H_DEFINES_STRUCT_TIMESPEC = 0 PTRDIFF_T_SUFFIX = RANLIB = x86_64-pc-linux-gnu-ranlib REPLACE_BTOWC = 0 REPLACE_CALLOC = 0 REPLACE_CANONICALIZE_FILE_NAME = 0 REPLACE_CHOWN = 0 REPLACE_CLOSE = 0 REPLACE_CLOSEDIR = 0 REPLACE_DIRFD = 0 REPLACE_DPRINTF = 0 REPLACE_DUP = 0 REPLACE_DUP2 = 0 REPLACE_DUPLOCALE = 0 REPLACE_FCHOWNAT = 0 REPLACE_FCLOSE = 0 REPLACE_FCNTL = 0 REPLACE_FDOPEN = 0 REPLACE_FDOPENDIR = 0 REPLACE_FFLUSH = 1 REPLACE_FOPEN = 0 REPLACE_FPRINTF = 0 REPLACE_FPURGE = 0 REPLACE_FREOPEN = 0 REPLACE_FSEEK = 1 REPLACE_FSEEKO = 1 REPLACE_FSTAT = 0 REPLACE_FSTATAT = 0 REPLACE_FTELL = 0 REPLACE_FTELLO = 0 REPLACE_FTRUNCATE = 0 REPLACE_FUTIMENS = 0 REPLACE_GETCWD = 0 REPLACE_GETDELIM = 0 REPLACE_GETDOMAINNAME = 0 REPLACE_GETDTABLESIZE = 0 REPLACE_GETGROUPS = 0 REPLACE_GETLINE = 0 REPLACE_GETLOGIN_R = 0 REPLACE_GETPAGESIZE = 0 REPLACE_GETTIMEOFDAY = 0 REPLACE_GMTIME = 0 REPLACE_ISATTY = 0 REPLACE_ISWBLANK = 0 REPLACE_ISWCNTRL = 0 REPLACE_LCHOWN = 0 REPLACE_LINK = 0 REPLACE_LINKAT = 0 REPLACE_LOCALECONV = 0 REPLACE_LOCALTIME = 0 REPLACE_LOCALTIME_R = GNULIB_PORTCHECK REPLACE_LSEEK = 0 REPLACE_LSTAT = 0 REPLACE_MALLOC = 0 REPLACE_MBRLEN = 1 REPLACE_MBRTOWC = 1 REPLACE_MBSINIT = 0 REPLACE_MBSNRTOWCS = 0 REPLACE_MBSRTOWCS = 0 REPLACE_MBSTATE_T = 0 REPLACE_MBTOWC = 0 REPLACE_MEMCHR = 0 REPLACE_MEMMEM = 0 REPLACE_MKDIR = 0 REPLACE_MKFIFO = 0 REPLACE_MKNOD = 0 REPLACE_MKSTEMP = 0 REPLACE_MKTIME = GNULIB_PORTCHECK REPLACE_NANOSLEEP = GNULIB_PORTCHECK REPLACE_NL_LANGINFO = 0 REPLACE_NULL = 0 REPLACE_OBSTACK_PRINTF = 0 REPLACE_OPEN = 0 REPLACE_OPENAT = 0 REPLACE_OPENDIR = 0 REPLACE_PERROR = 0 REPLACE_POPEN = 0 REPLACE_PREAD = 0 REPLACE_PRINTF = 0 REPLACE_PTSNAME = 0 REPLACE_PTSNAME_R = 0 REPLACE_PUTENV = 0 REPLACE_PWRITE = 0 REPLACE_QSORT_R = 0 REPLACE_RANDOM_R = 0 REPLACE_READ = 0 REPLACE_READLINK = 0 REPLACE_READLINKAT = 0 REPLACE_REALLOC = 0 REPLACE_REALPATH = 0 REPLACE_REMOVE = 0 REPLACE_RENAME = 0 REPLACE_RENAMEAT = 0 REPLACE_RMDIR = 0 REPLACE_SETENV = 0 REPLACE_SETLOCALE = 0 REPLACE_SLEEP = 0 REPLACE_SNPRINTF = 0 REPLACE_SPRINTF = 0 REPLACE_STAT = 0 REPLACE_STDIO_READ_FUNCS = 0 REPLACE_STDIO_WRITE_FUNCS = 0 REPLACE_STPNCPY = 0 REPLACE_STRCASESTR = 0 REPLACE_STRCHRNUL = 0 REPLACE_STRDUP = 0 REPLACE_STRERROR = 0 REPLACE_STRERROR_R = 0 REPLACE_STRNCAT = 0 REPLACE_STRNDUP = 0 REPLACE_STRNLEN = 0 REPLACE_STRSIGNAL = 0 REPLACE_STRSTR = 0 REPLACE_STRTOD = 0 REPLACE_STRTOIMAX = 0 REPLACE_STRTOK_R = 0 REPLACE_STRTOUMAX = 0 REPLACE_STRUCT_LCONV = 0 REPLACE_STRUCT_TIMEVAL = 0 REPLACE_SYMLINK = 0 REPLACE_SYMLINKAT = 0 REPLACE_TIMEGM = GNULIB_PORTCHECK REPLACE_TMPFILE = 0 REPLACE_TOWLOWER = 0 REPLACE_TTYNAME_R = 0 REPLACE_UNLINK = 0 REPLACE_UNLINKAT = 0 REPLACE_UNSETENV = 0 REPLACE_USLEEP = 0 REPLACE_UTIMENSAT = 0 REPLACE_VASPRINTF = 0 REPLACE_VDPRINTF = 0 REPLACE_VFPRINTF = 0 REPLACE_VPRINTF = 0 REPLACE_VSNPRINTF = 0 REPLACE_VSPRINTF = 0 REPLACE_WCRTOMB = 0 REPLACE_WCSNRTOMBS = 0 REPLACE_WCSRTOMBS = 0 REPLACE_WCSWIDTH = 0 REPLACE_WCTOB = 0 REPLACE_WCTOMB = 0 REPLACE_WCWIDTH = 0 REPLACE_WRITE = 0 SED = /bin/sed SELINUX_CONTEXT_H = lib/selinux/context.h SET_MAKE = SHELL = /usr/bin/env bash SIG_ATOMIC_T_SUFFIX = SIZE_T_SUFFIX = STDALIGN_H = STDARG_H = STDBOOL_H = STDDEF_H = STDINT_H = STRIP = SYS_TIME_H_DEFINES_STRUCT_TIMESPEC = 0 TIME_H_DEFINES_STRUCT_TIMESPEC = 1 UINT32_MAX_LT_UINTMAX_MAX = 1 UINT64_MAX_EQ_ULONG_MAX = 1 UNDEFINE_STRTOK_R = 0 UNISTD_H_DEFINES_STRUCT_TIMESPEC = 0 UNISTD_H_HAVE_WINSOCK2_H = 0 UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS = 0 USE_ACL = 0 USE_NLS = no VERSION = 4.4 WARN_CFLAGS = WCHAR_T_SUFFIX = WERROR_CFLAGS = WINDOWS_64_BIT_OFF_T = 0 WINDOWS_64_BIT_ST_SIZE = 0 WINT_T_SUFFIX = XFAIL_TESTS = XGETTEXT = /usr/bin/xgettext XGETTEXT_015 = /usr/bin/xgettext XGETTEXT_EXTRA_OPTIONS = --flag=error:3:c-format --flag=error_at_line:5:c-format abs_aux_dir = /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux abs_builddir = /mnt/gold/openwrt/lede/build_dir/host/sed-4.4 abs_srcdir = /mnt/gold/openwrt/lede/build_dir/host/sed-4.4 abs_top_builddir = /mnt/gold/openwrt/lede/build_dir/host/sed-4.4 abs_top_srcdir = /mnt/gold/openwrt/lede/build_dir/host/sed-4.4 ac_ct_AR = ac_ct_CC = am__include = include am__quote = am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build = x86_64-pc-linux-gnu build_alias = x86_64-pc-linux-gnu build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = /mnt/gold/openwrt/lede/staging_dir/host gl_LIBOBJS = lib/mbrlen.o lib/mbrtowc.o lib/obstack.o gl_LTLIBOBJS = lib/mbrlen.lo lib/mbrtowc.lo lib/obstack.lo gltests_LIBOBJS = fflush.o fpurge.o fseek.o fseeko.o gltests_LTLIBOBJS = fflush.lo fpurge.lo fseek.lo fseeko.lo gltests_WITNESS = IN_SED_GNULIB_TESTS host = x86_64-pc-linux-gnu host_alias = x86_64-pc-linux-gnu host_cpu = x86_64 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /mnt/gold/openwrt/lede/build_dir/host/sed-4.4/build-aux/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec lispdir = ${datarootdir}/emacs/site-lisp localedir = $(datadir)/locale localstatedir = /mnt/gold/openwrt/lede/staging_dir/host/var mandir = ${datarootdir}/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include pdfdir = ${docdir} prefix = /mnt/gold/openwrt/lede/staging_dir/host program_transform_name = s&$$&&;s&^&& psdir = ${docdir} runstatedir = ${localstatedir}/run sbindir = /mnt/gold/openwrt/lede/staging_dir/host/bin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = /mnt/gold/openwrt/lede/staging_dir/host/etc target_alias = x86_64-pc-linux-gnu top_build_prefix = top_builddir = . top_srcdir = . SUBDIRS = po . gnulib-tests # This applies to all parts: gnulib, sed, testsuites AM_CPPFLAGS = -I$(top_srcdir) \ -I$(top_srcdir)/lib \ -I$(top_builddir)/lib \ -I$(top_builddir)/sed AM_CFLAGS = # The BUILT_SOURCES created by this Makefile snippet are not used via #include # statements but through direct file reference. Therefore this snippet must be # present in all Makefile.am that need it. This is ensured by the applicability # 'all' defined above. # The BUILT_SOURCES created by this Makefile snippet are not used via #include # statements but through direct file reference. Therefore this snippet must be # present in all Makefile.am that need it. This is ensured by the applicability # 'all' defined above. # The BUILT_SOURCES created by this Makefile snippet are not used via #include # statements but through direct file reference. Therefore this snippet must be # present in all Makefile.am that need it. This is ensured by the applicability # 'all' defined above. BUILT_SOURCES = .version $(ALLOCA_H) lib/configmake.h lib/ctype.h \ $(ERRNO_H) lib/fcntl.h $(GETOPT_H) lib/langinfo.h $(LIMITS_H) \ lib/locale.h lib/selinux/selinux.h $(SELINUX_CONTEXT_H) \ lib/arg-nonnull.h lib/c++defs.h lib/unused-parameter.h \ lib/warn-on-use.h $(STDALIGN_H) $(STDARG_H) $(STDBOOL_H) \ $(STDDEF_H) $(STDINT_H) lib/stdio.h lib/stdlib.h lib/string.h \ lib/sys/stat.h lib/sys/time.h lib/sys/types.h lib/time.h \ lib/unistd.h lib/wchar.h lib/wctype.h sed/version.c \ sed/version.h CLEANFILES = lib/configmake.h lib/configmake.h-t lib/charset.alias \ lib/ref-add.sed lib/ref-del.sed tmp* core *.core \ $(EXTRA_PROGRAMS) *.*out *.log eval.in2 EXTRA_DIST = BUGS THANKS.in .version .mailmap ChangeLog-2014 \ po/ChangeLog-2014 bootstrap bootstrap.conf build-aux/help2man \ thanks-gen lib/acl-internal.h lib/acl.h lib/acl_entries.c \ lib/alignof.h lib/alloca.c lib/alloca.in.h \ $(top_srcdir)/build-aux/announce-gen lib/btowc.c \ lib/c-strcaseeq.h lib/canonicalize-lgpl.c lib/close-stream.h \ lib/closeout.h lib/ctype.in.h lib/dfa.h lib/localeinfo.h \ lib/dirname.h \ $(top_srcdir)/build-aux/do-release-commit-and-tag \ lib/dosname.h lib/errno.in.h lib/error.c lib/error.h \ lib/exitfail.h lib/fcntl.in.h lib/fpending.c lib/fpending.h \ lib/stdio-impl.h lib/fstat.c lib/fwriting.c lib/fwriting.h \ lib/stdio-impl.h $(top_srcdir)/build-aux/gendocs.sh \ lib/getdelim.c lib/getopt.c lib/getopt.in.h lib/getopt1.c \ lib/getopt_int.h lib/gettimeofday.c \ $(top_srcdir)/build-aux/git-version-gen \ $(top_srcdir)/build-aux/gitlog-to-changelog \ $(top_srcdir)/build-aux/gnu-web-doc-update \ $(top_srcdir)/GNUmakefile $(top_srcdir)/build-aux/gnupload \ lib/hard-locale.h $(top_srcdir)/build-aux/config.rpath \ lib/ignore-value.h lib/intprops.h lib/isblank.c \ lib/langinfo.in.h lib/limits.in.h lib/config.charset \ lib/ref-add.sin lib/ref-del.sin lib/locale.in.h \ lib/localeconv.c lib/lstat.c $(top_srcdir)/maint.mk \ lib/malloc.c lib/malloca.h lib/malloca.valgrind lib/mbrlen.c \ lib/mbrtowc.c lib/mbsinit.c lib/mbtowc-impl.h lib/mbtowc.c \ lib/memchr.c lib/memchr.valgrind lib/memrchr.c lib/mkostemp.c \ lib/msvc-inval.c lib/msvc-inval.h lib/msvc-nothrow.c \ lib/msvc-nothrow.h lib/nl_langinfo.c \ $(top_srcdir)/build-aux/prefix-gnulib-mk lib/obstack.c \ lib/obstack.h lib/pathmax.h lib/quote.h lib/quote.h \ lib/quotearg.h lib/readlink.c $(top_srcdir)/README-release \ lib/regcomp.c lib/regex.c lib/regex.h lib/regex_internal.c \ lib/regex_internal.h lib/regexec.c lib/rename.c lib/rmdir.c \ lib/same-inode.h lib/secure_getenv.c lib/getfilecon.c \ $(top_srcdir)/build-aux/snippet/_Noreturn.h \ $(top_srcdir)/build-aux/snippet/arg-nonnull.h \ $(top_srcdir)/build-aux/snippet/c++defs.h \ $(top_srcdir)/build-aux/snippet/unused-parameter.h \ $(top_srcdir)/build-aux/snippet/warn-on-use.h lib/stat.c \ lib/stat-macros.h lib/stdalign.in.h lib/stdarg.in.h \ lib/stdbool.in.h lib/stddef.in.h lib/stdint.in.h \ lib/stdio.in.h lib/stdlib.in.h lib/streq.h lib/strerror.c \ lib/strerror-override.c lib/strerror-override.h \ lib/string.in.h lib/strverscmp.c lib/sys_stat.in.h \ lib/sys_time.in.h lib/sys_types.in.h lib/tempname.h \ $(top_srcdir)/build-aux/config.rpath lib/time.in.h \ lib/unistd.in.h lib/unlocked-io.h \ $(top_srcdir)/build-aux/update-copyright \ $(top_srcdir)/build-aux/useless-if-before-free \ $(top_srcdir)/build-aux/vc-list-files lib/verify.h \ lib/wchar.in.h lib/wcrtomb.c lib/wctob.c lib/wctomb-impl.h \ lib/wctomb.c lib/wctype.in.h lib/xalloc.h \ lib/xalloc-oversized.h $(T) testsuite/init.sh init.cfg \ testsuite/envvar-check testsuite/PCRE.tests \ testsuite/BOOST.tests testsuite/SPENCER.tests \ testsuite/runtest testsuite/Makefile.tests \ testsuite/0range.good testsuite/0range.inp \ testsuite/0range.sed testsuite/8bit.good testsuite/8bit.inp \ testsuite/8bit.sed testsuite/8to7.good testsuite/8to7.inp \ testsuite/8to7.sed testsuite/allsub.good testsuite/allsub.inp \ testsuite/allsub.sed testsuite/amp-escape.good \ testsuite/amp-escape.inp testsuite/amp-escape.sed \ testsuite/appquit.good testsuite/appquit.inp \ testsuite/appquit.sed testsuite/binary.good \ testsuite/binary.inp testsuite/binary.sed \ testsuite/binary2.sed testsuite/binary3.sed \ testsuite/bkslashes.good testsuite/bkslashes.inp \ testsuite/bkslashes.sed testsuite/brackets.good \ testsuite/brackets.inp testsuite/brackets.sed \ testsuite/bsd.good testsuite/bsd.sh testsuite/cv-vars.good \ testsuite/cv-vars.inp testsuite/cv-vars.sed \ testsuite/classes.good testsuite/classes.inp \ testsuite/classes.sed testsuite/dc.good testsuite/dc.inp \ testsuite/dc.sed testsuite/distrib.good testsuite/distrib.inp \ testsuite/distrib.sed testsuite/distrib.sh \ testsuite/dollar.good testsuite/dollar.inp \ testsuite/dollar.sed testsuite/empty.good testsuite/empty.inp \ testsuite/empty.sed testsuite/enable.good testsuite/enable.inp \ testsuite/enable.sed testsuite/eval.good testsuite/eval.inp \ testsuite/eval.sed testsuite/factor.good testsuite/factor.inp \ testsuite/factor.sed testsuite/fasts.good testsuite/fasts.inp \ testsuite/fasts.sed testsuite/flipcase.good \ testsuite/flipcase.inp testsuite/flipcase.sed \ testsuite/head.good testsuite/head.inp testsuite/head.sed \ testsuite/inclib.good testsuite/inclib.inp \ testsuite/inclib.sed testsuite/insens.good \ testsuite/insens.inp testsuite/insens.sed \ testsuite/insert.good testsuite/insert.inp \ testsuite/insert.sed testsuite/khadafy.good \ testsuite/khadafy.inp testsuite/khadafy.sed \ testsuite/linecnt.good testsuite/linecnt.inp \ testsuite/linecnt.sed testsuite/space.good testsuite/space.inp \ testsuite/space.sed testsuite/mac-mf.good testsuite/mac-mf.inp \ testsuite/mac-mf.sed testsuite/madding.good \ testsuite/madding.inp testsuite/madding.sed \ testsuite/manis.good testsuite/manis.inp testsuite/manis.sed \ testsuite/middle.good testsuite/middle.sed \ testsuite/middle.inp testsuite/modulo.good \ testsuite/modulo.sed testsuite/modulo.inp \ testsuite/newjis.good testsuite/newjis.inp \ testsuite/newjis.sed testsuite/newline-anchor.good \ testsuite/newline-anchor.inp testsuite/newline-anchor.sed \ testsuite/noeol.good testsuite/noeol.inp testsuite/noeol.sed \ testsuite/noeolw.good testsuite/noeolw.1good \ testsuite/noeolw.2good testsuite/noeolw.sed \ testsuite/numsub.good testsuite/numsub.inp \ testsuite/numsub.sed testsuite/numsub2.good \ testsuite/numsub2.inp testsuite/numsub2.sed \ testsuite/numsub3.good testsuite/numsub3.inp \ testsuite/numsub3.sed testsuite/numsub4.good \ testsuite/numsub4.inp testsuite/numsub4.sed \ testsuite/numsub5.good testsuite/numsub5.inp \ testsuite/numsub5.sed testsuite/readin.good \ testsuite/readin.inp testsuite/readin.sed \ testsuite/recall.good testsuite/recall.inp \ testsuite/recall.sed testsuite/recall2.good \ testsuite/recall2.inp testsuite/recall2.sed testsuite/sep.good \ testsuite/sep.inp testsuite/sep.sed testsuite/subwrite.inp \ testsuite/subwrite.sed testsuite/subwrt1.good \ testsuite/subwrt2.good testsuite/uniq.good testsuite/uniq.inp \ testsuite/uniq.sed testsuite/utf8-1.good testsuite/utf8-1.inp \ testsuite/utf8-1.sed testsuite/utf8-2.good \ testsuite/utf8-2.inp testsuite/utf8-2.sed \ testsuite/utf8-3.good testsuite/utf8-3.inp \ testsuite/utf8-3.sed testsuite/utf8-4.good \ testsuite/utf8-4.inp testsuite/utf8-4.sed \ testsuite/badenc.good testsuite/badenc.inp \ testsuite/badenc.sed testsuite/writeout.inp \ testsuite/writeout.sed testsuite/wrtout1.good \ testsuite/wrtout2.good testsuite/xabcx.good \ testsuite/xabcx.inp testsuite/xabcx.sed testsuite/xbxcx.good \ testsuite/xbxcx.inp testsuite/xbxcx.sed testsuite/xbxcx3.good \ testsuite/xbxcx3.inp testsuite/xbxcx3.sed \ testsuite/xemacs.good testsuite/xemacs.inp \ testsuite/xemacs.sed testsuite/y-bracket.good \ testsuite/y-bracket.sed testsuite/y-bracket.inp \ testsuite/y-zero.good testsuite/y-zero.sed \ testsuite/y-zero.inp testsuite/y-newline.good \ testsuite/y-newline.sed testsuite/y-newline.inp \ testsuite/zero-anchor.good testsuite/zero-anchor.sed \ testsuite/zero-anchor.inp MAINTAINERCLEANFILES = MOSTLYCLEANDIRS = lib/selinux lib/sys MOSTLYCLEANFILES = lib/core lib/*.stackdump lib/alloca.h \ lib/alloca.h-t lib/ctype.h lib/ctype.h-t lib/errno.h \ lib/errno.h-t lib/fcntl.h lib/fcntl.h-t lib/getopt.h \ lib/getopt.h-t lib/langinfo.h lib/langinfo.h-t lib/limits.h \ lib/limits.h-t lib/locale.h lib/locale.h-t \ lib/selinux/selinux.h lib/selinux/selinux.h-t \ lib/selinux/context.h lib/selinux/context.h-t \ lib/arg-nonnull.h lib/arg-nonnull.h-t lib/c++defs.h \ lib/c++defs.h-t lib/unused-parameter.h \ lib/unused-parameter.h-t lib/warn-on-use.h lib/warn-on-use.h-t \ lib/stdalign.h lib/stdalign.h-t lib/stdarg.h lib/stdarg.h-t \ lib/stdbool.h lib/stdbool.h-t lib/stddef.h lib/stddef.h-t \ lib/stdint.h lib/stdint.h-t lib/stdio.h lib/stdio.h-t \ lib/stdlib.h lib/stdlib.h-t lib/string.h lib/string.h-t \ lib/sys/stat.h lib/sys/stat.h-t lib/sys/time.h \ lib/sys/time.h-t lib/sys/types.h lib/sys/types.h-t lib/time.h \ lib/time.h-t lib/unistd.h lib/unistd.h-t lib/wchar.h \ lib/wchar.h-t lib/wctype.h lib/wctype.h-t SUFFIXES = noinst_LIBRARIES = lib/libsed.a sed/libver.a noinst_DATA = noinst_HEADERS = basicdefs.h sed/sed.h sed/utils.h \ testsuite/testcases.h testsuite/ptestcases.h DISTCLEANFILES = sed/version.c sed/version.h gen_start_date = 2014-09-06 # Sort in traditional ASCII order, regardless of the current locale; # otherwise we may get into trouble with distinct strings that the # current locale considers to be equal. ASSORT = LC_ALL=C sort # Extract all lines up to the first one starting with "##". prologue = perl -ne '/^\#\#/ and exit; print' $(srcdir)/THANKS.in DISTCHECK_CONFIGURE_FLAGS = XGETTEXT='$(SHELL) -c : dummy' $(EXTRA_DC_FLAGS) EXTRA_DC_FLAGS = lib_libsed_a_SOURCES = lib/copy-acl.c lib/set-acl.c \ lib/acl-errno-valid.c lib/acl-internal.c lib/get-permissions.c \ lib/set-permissions.c lib/c-ctype.h lib/c-ctype.c \ lib/c-strcase.h lib/c-strcasecmp.c lib/c-strncasecmp.c \ lib/close-stream.c lib/closeout.c lib/dfa.c lib/localeinfo.c \ lib/dirname-lgpl.c lib/basename-lgpl.c lib/stripslash.c \ lib/exitfail.c lib/getprogname.h lib/getprogname.c \ lib/gettext.h lib/hard-locale.c lib/localcharset.h \ lib/localcharset.c lib/glthread/lock.h lib/glthread/lock.c \ lib/malloca.c lib/minmax.h lib/progname.h lib/progname.c \ lib/qcopy-acl.c lib/qset-acl.c lib/quotearg.c \ lib/se-context.in.h lib/se-selinux.in.h lib/se-context.c \ lib/se-selinux.c lib/tempname.c lib/glthread/threadlib.c \ lib/unistd.c lib/version-etc.h lib/version-etc.c \ lib/version-etc-fsf.c lib/wctype-h.c lib/xmalloc.c \ lib/xalloc-die.c lib_libsed_a_LIBADD = $(gl_LIBOBJS) lib_libsed_a_DEPENDENCIES = $(gl_LIBOBJS) EXTRA_lib_libsed_a_SOURCES = lib/acl_entries.c lib/alloca.c \ lib/btowc.c lib/canonicalize-lgpl.c lib/error.c lib/fpending.c \ lib/fstat.c lib/fwriting.c lib/getdelim.c lib/getopt.c \ lib/getopt1.c lib/gettimeofday.c lib/isblank.c \ lib/localeconv.c lib/lstat.c lib/malloc.c lib/mbrlen.c \ lib/mbrtowc.c lib/mbsinit.c lib/mbtowc.c lib/memchr.c \ lib/memrchr.c lib/mkostemp.c lib/msvc-inval.c \ lib/msvc-nothrow.c lib/nl_langinfo.c lib/obstack.c \ lib/readlink.c lib/regcomp.c lib/regex.c lib/regex_internal.c \ lib/regexec.c lib/rename.c lib/rmdir.c lib/secure_getenv.c \ lib/getfilecon.c lib/stat.c lib/strerror.c \ lib/strerror-override.c lib/strverscmp.c lib/wcrtomb.c \ lib/wctob.c lib/wctomb.c # Use this preprocessor expression to decide whether #include_next works. # Do not rely on a 'configure'-time test for this, since the expression # might appear in an installed header, which is used by some other compiler. HAVE_INCLUDE_NEXT = lib/(__GNUC__ lib/|| lib/60000000 lib/<= lib/__DECC_VER) charset_alias = $(DESTDIR)$(libdir)/charset.alias charset_tmp = $(DESTDIR)$(libdir)/charset.tmp # Because this Makefile snippet defines a variable used by other # gnulib Makefile snippets, it must be present in all Makefile.am that # need it. This is ensured by the applicability 'all' defined above. _NORETURN_H = $(top_srcdir)/build-aux/snippet/_Noreturn.h ARG_NONNULL_H = lib/arg-nonnull.h CXXDEFS_H = lib/c++defs.h UNUSED_PARAMETER_H = lib/unused-parameter.h WARN_ON_USE_H = lib/warn-on-use.h sed_sed_SOURCES = \ sed/compile.c \ sed/execute.c \ sed/mbcs.c \ sed/regexp.c \ sed/sed.c \ sed/utils.c sed_sed_CPPFLAGS = $(AM_CPPFLAGS) -DLOCALEDIR=\"$(localedir)\" sed_sed_CFLAGS = $(AM_CFLAGS) $(WARN_CFLAGS) $(WERROR_CFLAGS) sed_sed_LDADD = sed/libver.a lib/libsed.a $(INTLLIBS) $(LIB_ACL) $(LIB_SELINUX) sed_sed_DEPENDENCIES = lib/libsed.a sed/libver.a nodist_sed_libver_a_SOURCES = sed/version.c sed/version.h info_TEXINFOS = doc/sed.texi doc_sed_TEXINFOS = doc/config.texi doc/version.texi doc/fdl.texi dist_man_MANS = doc/sed.1 dist_noinst_DATA = doc/sed.x doc/sed-dummy.1 HELP2MAN = $(top_srcdir)/build-aux/help2man SEDBIN = sed/sed AM_MAKEINFOHTMLFLAGS = --no-split TEST_EXTENSIONS = .sh SH_LOG_COMPILER = $(SHELL) # Put new, init.sh-using tests here, so that each name # is listed in only one place. T = testsuite/cmd-l.sh testsuite/cmd-R.sh \ testsuite/colon-with-no-label.sh testsuite/comment-n.sh \ testsuite/compile-errors.sh testsuite/compile-tests.sh \ testsuite/convert-number.sh testsuite/execute-tests.sh \ testsuite/help-version.sh testsuite/in-place-hyphen.sh \ testsuite/in-place-suffix-backup.sh \ testsuite/invalid-mb-seq-UMR.sh testsuite/mb-bad-delim.sh \ testsuite/mb-charclass-non-utf8.sh testsuite/mb-match-slash.sh \ testsuite/mb-y-translate.sh testsuite/newline-dfa-bug.sh \ testsuite/normalize-text.sh testsuite/nulldata.sh \ testsuite/panic-tests.sh testsuite/posix-char-class.sh \ testsuite/posix-mode-addr.sh testsuite/posix-mode-bad-ref.sh \ testsuite/posix-mode-s.sh testsuite/posix-mode-N.sh \ testsuite/range-overlap.sh testsuite/recursive-escape-c.sh \ testsuite/regex-errors.sh testsuite/sandbox.sh \ testsuite/stdin-prog.sh testsuite/subst-options.sh \ testsuite/subst-mb-incomplete.sh \ testsuite/subst-replacement.sh testsuite/temp-file-cleanup.sh \ testsuite/title-case.sh testsuite/unbuffered.sh \ $(am__append_1) TESTS = $(check_PROGRAMS) $(SEDTESTS) $(T) SEDTESTS = $(am__append_3) testsuite/appquit testsuite/enable \ testsuite/sep testsuite/inclib testsuite/8bit testsuite/newjis \ testsuite/xabcx testsuite/dollar testsuite/noeol \ testsuite/noeolw testsuite/modulo testsuite/numsub \ testsuite/numsub2 testsuite/numsub3 testsuite/numsub4 \ testsuite/numsub5 testsuite/0range testsuite/bkslashes \ testsuite/head testsuite/madding testsuite/mac-mf \ testsuite/empty testsuite/xbxcx testsuite/xbxcx3 \ testsuite/recall testsuite/recall2 testsuite/xemacs \ testsuite/fasts testsuite/uniq testsuite/manis \ testsuite/khadafy testsuite/linecnt testsuite/eval \ testsuite/distrib testsuite/8to7 testsuite/y-bracket \ testsuite/y-newline testsuite/y-zero testsuite/allsub \ testsuite/cv-vars testsuite/classes testsuite/middle \ testsuite/bsd testsuite/stdin testsuite/flipcase \ testsuite/insens testsuite/subwrite testsuite/writeout \ testsuite/readin testsuite/insert testsuite/utf8-1 \ testsuite/utf8-2 testsuite/utf8-3 testsuite/utf8-4 \ testsuite/badenc testsuite/inplace-hold testsuite/brackets \ testsuite/amp-escape testsuite/help testsuite/file \ testsuite/quiet testsuite/factor testsuite/binary3 \ testsuite/binary2 testsuite/binary testsuite/dc \ testsuite/newline-anchor testsuite/zero-anchor testsuite_get_mb_cur_max_LDADD = lib/libsed.a $(INTLLIBS) testsuite_test_mbrtowc_LDADD = lib/libsed.a $(INTLLIBS) # Note that the first lines are statements. They ensure that environment # variables that can perturb tests are unset or set to expected values. # The rest are envvar settings that propagate build-related Makefile # variables to test scripts. TESTS_ENVIRONMENT = \ tmp__=$${TMPDIR-/tmp}; \ test -d "$$tmp__" && test -w "$$tmp__" || tmp__=.; \ . $(srcdir)/testsuite/envvar-check; \ TMPDIR=$$tmp__; export TMPDIR; \ \ if test -n "$$BASH_VERSION" || (eval "export v=x") 2>/dev/null; then \ export_with_values () { export "$$@"; }; \ else \ export_with_values () \ { \ sed_extract_var='s/=.*//'; \ sed_quote_value="s/'/'\\\\''/g;s/=\\(.*\\)/='\\1'/";\ for arg in "$$@"; do \ var=`echo "$$arg" | sed "$$sed_extract_var"`; \ arg=`echo "$$arg" | sed "$$sed_quote_value"`; \ eval "$$arg"; \ export "$$var"; \ done; \ }; \ fi; \ \ export_with_values \ VERSION='$(VERSION)' \ LOCALE_FR='$(LOCALE_FR)' \ LOCALE_FR_UTF8='$(LOCALE_FR_UTF8)' \ LOCALE_JA='$(LOCALE_JA)' \ AWK=$(AWK) \ LC_ALL=C \ abs_top_builddir='$(abs_top_builddir)' \ abs_top_srcdir='$(abs_top_srcdir)' \ abs_srcdir='$(abs_srcdir)' \ built_programs=sed; \ srcdir='$(srcdir)' \ top_srcdir='$(top_srcdir)' \ CC='$(CC)' \ SED_TEST_NAME=`echo $$tst|sed 's,^\./,,;s,/,-,g'` \ MAKE=$(MAKE) \ MALLOC_PERTURB_=$(MALLOC_PERTURB_) \ PACKAGE_BUGREPORT='$(PACKAGE_BUGREPORT)' \ PACKAGE_VERSION=$(PACKAGE_VERSION) \ PERL='$(PERL)' \ SHELL='$(SHELL)' \ PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH" \ $(LOCALCHARSET_TESTS_ENVIRONMENT) \ ; 9>&2 LOG_COMPILER = $(top_srcdir)/testsuite/runtest all: $(BUILT_SOURCES) config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .dvi .log .o .obj .ps .sed .sh .sh$(EXEEXT) .sin .trs am--refresh: Makefile @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/lib/local.mk $(srcdir)/lib/gnulib.mk $(top_srcdir)/sed/local.mk $(top_srcdir)/doc/local.mk $(top_srcdir)/testsuite/local.mk $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_srcdir)/lib/local.mk $(srcdir)/lib/gnulib.mk $(top_srcdir)/sed/local.mk $(top_srcdir)/doc/local.mk $(top_srcdir)/testsuite/local.mk $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @test -f $@ || rm -f stamp-h1 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 stamp-h1: $(srcdir)/config_h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config_h.in: $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 clean-noinstLIBRARIES: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) lib/$(am__dirstamp): @$(MKDIR_P) lib @: > lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) lib/$(DEPDIR) @: > lib/$(DEPDIR)/$(am__dirstamp) lib/copy-acl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/set-acl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/acl-errno-valid.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/acl-internal.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/get-permissions.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/set-permissions.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/c-ctype.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/c-strcasecmp.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/c-strncasecmp.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/close-stream.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/closeout.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/dfa.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/localeinfo.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/dirname-lgpl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/basename-lgpl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/stripslash.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/exitfail.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/getprogname.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/hard-locale.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/localcharset.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/glthread/$(am__dirstamp): @$(MKDIR_P) lib/glthread @: > lib/glthread/$(am__dirstamp) lib/glthread/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) lib/glthread/$(DEPDIR) @: > lib/glthread/$(DEPDIR)/$(am__dirstamp) lib/glthread/lock.$(OBJEXT): lib/glthread/$(am__dirstamp) \ lib/glthread/$(DEPDIR)/$(am__dirstamp) lib/malloca.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/progname.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/qcopy-acl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/qset-acl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/quotearg.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/se-context.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/se-selinux.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/tempname.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/glthread/threadlib.$(OBJEXT): lib/glthread/$(am__dirstamp) \ lib/glthread/$(DEPDIR)/$(am__dirstamp) lib/unistd.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/version-etc.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/version-etc-fsf.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/wctype-h.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/xmalloc.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/xalloc-die.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/acl_entries.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/alloca.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/btowc.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/canonicalize-lgpl.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/error.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/fpending.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/fstat.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/fwriting.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/getdelim.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/getopt.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/getopt1.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/gettimeofday.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/isblank.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/localeconv.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/lstat.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/malloc.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/mbrlen.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/mbrtowc.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/mbsinit.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/mbtowc.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/memchr.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/memrchr.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/mkostemp.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/msvc-inval.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/msvc-nothrow.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/nl_langinfo.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/obstack.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/readlink.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/regcomp.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/regex.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/regex_internal.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/regexec.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/rename.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/rmdir.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/secure_getenv.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/getfilecon.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/stat.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/strerror.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/strerror-override.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/strverscmp.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/wcrtomb.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/wctob.$(OBJEXT): lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp) lib/wctomb.$(OBJEXT): lib/$(am__dirstamp) \ lib/$(DEPDIR)/$(am__dirstamp) lib/libsed.a: $(lib_libsed_a_OBJECTS) $(lib_libsed_a_DEPENDENCIES) $(EXTRA_lib_libsed_a_DEPENDENCIES) lib/$(am__dirstamp) $(AM_V_at)-rm -f lib/libsed.a $(AM_V_AR)$(lib_libsed_a_AR) lib/libsed.a $(lib_libsed_a_OBJECTS) $(lib_libsed_a_LIBADD) $(AM_V_at)$(RANLIB) lib/libsed.a sed/$(am__dirstamp): @$(MKDIR_P) sed @: > sed/$(am__dirstamp) sed/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) sed/$(DEPDIR) @: > sed/$(DEPDIR)/$(am__dirstamp) sed/version.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/libver.a: $(sed_libver_a_OBJECTS) $(sed_libver_a_DEPENDENCIES) $(EXTRA_sed_libver_a_DEPENDENCIES) sed/$(am__dirstamp) $(AM_V_at)-rm -f sed/libver.a $(AM_V_AR)$(sed_libver_a_AR) sed/libver.a $(sed_libver_a_OBJECTS) $(sed_libver_a_LIBADD) $(AM_V_at)$(RANLIB) sed/libver.a install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' \ -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) clean-checkPROGRAMS: -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) sed/sed_sed-compile.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/sed_sed-execute.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/sed_sed-mbcs.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/sed_sed-regexp.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/sed_sed-sed.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/sed_sed-utils.$(OBJEXT): sed/$(am__dirstamp) \ sed/$(DEPDIR)/$(am__dirstamp) sed/sed$(EXEEXT): $(sed_sed_OBJECTS) $(sed_sed_DEPENDENCIES) $(EXTRA_sed_sed_DEPENDENCIES) sed/$(am__dirstamp) @rm -f sed/sed$(EXEEXT) $(AM_V_CCLD)$(sed_sed_LINK) $(sed_sed_OBJECTS) $(sed_sed_LDADD) $(LIBS) testsuite/$(am__dirstamp): @$(MKDIR_P) testsuite @: > testsuite/$(am__dirstamp) testsuite/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) testsuite/$(DEPDIR) @: > testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex10.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex10$(EXEEXT): $(testsuite_bug_regex10_OBJECTS) $(testsuite_bug_regex10_DEPENDENCIES) $(EXTRA_testsuite_bug_regex10_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex10$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex10_OBJECTS) $(testsuite_bug_regex10_LDADD) $(LIBS) testsuite/bug-regex11.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex11$(EXEEXT): $(testsuite_bug_regex11_OBJECTS) $(testsuite_bug_regex11_DEPENDENCIES) $(EXTRA_testsuite_bug_regex11_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex11$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex11_OBJECTS) $(testsuite_bug_regex11_LDADD) $(LIBS) testsuite/bug-regex12.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex12$(EXEEXT): $(testsuite_bug_regex12_OBJECTS) $(testsuite_bug_regex12_DEPENDENCIES) $(EXTRA_testsuite_bug_regex12_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex12$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex12_OBJECTS) $(testsuite_bug_regex12_LDADD) $(LIBS) testsuite/bug-regex13.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex13$(EXEEXT): $(testsuite_bug_regex13_OBJECTS) $(testsuite_bug_regex13_DEPENDENCIES) $(EXTRA_testsuite_bug_regex13_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex13$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex13_OBJECTS) $(testsuite_bug_regex13_LDADD) $(LIBS) testsuite/bug-regex14.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex14$(EXEEXT): $(testsuite_bug_regex14_OBJECTS) $(testsuite_bug_regex14_DEPENDENCIES) $(EXTRA_testsuite_bug_regex14_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex14$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex14_OBJECTS) $(testsuite_bug_regex14_LDADD) $(LIBS) testsuite/bug-regex15.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex15$(EXEEXT): $(testsuite_bug_regex15_OBJECTS) $(testsuite_bug_regex15_DEPENDENCIES) $(EXTRA_testsuite_bug_regex15_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex15$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex15_OBJECTS) $(testsuite_bug_regex15_LDADD) $(LIBS) testsuite/bug-regex16.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex16$(EXEEXT): $(testsuite_bug_regex16_OBJECTS) $(testsuite_bug_regex16_DEPENDENCIES) $(EXTRA_testsuite_bug_regex16_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex16$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex16_OBJECTS) $(testsuite_bug_regex16_LDADD) $(LIBS) testsuite/bug-regex21.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex21$(EXEEXT): $(testsuite_bug_regex21_OBJECTS) $(testsuite_bug_regex21_DEPENDENCIES) $(EXTRA_testsuite_bug_regex21_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex21$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex21_OBJECTS) $(testsuite_bug_regex21_LDADD) $(LIBS) testsuite/bug-regex27.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex27$(EXEEXT): $(testsuite_bug_regex27_OBJECTS) $(testsuite_bug_regex27_DEPENDENCIES) $(EXTRA_testsuite_bug_regex27_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex27$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex27_OBJECTS) $(testsuite_bug_regex27_LDADD) $(LIBS) testsuite/bug-regex28.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex28$(EXEEXT): $(testsuite_bug_regex28_OBJECTS) $(testsuite_bug_regex28_DEPENDENCIES) $(EXTRA_testsuite_bug_regex28_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex28$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex28_OBJECTS) $(testsuite_bug_regex28_LDADD) $(LIBS) testsuite/bug-regex7.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex7$(EXEEXT): $(testsuite_bug_regex7_OBJECTS) $(testsuite_bug_regex7_DEPENDENCIES) $(EXTRA_testsuite_bug_regex7_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex7$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex7_OBJECTS) $(testsuite_bug_regex7_LDADD) $(LIBS) testsuite/bug-regex8.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex8$(EXEEXT): $(testsuite_bug_regex8_OBJECTS) $(testsuite_bug_regex8_DEPENDENCIES) $(EXTRA_testsuite_bug_regex8_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex8$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex8_OBJECTS) $(testsuite_bug_regex8_LDADD) $(LIBS) testsuite/bug-regex9.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/bug-regex9$(EXEEXT): $(testsuite_bug_regex9_OBJECTS) $(testsuite_bug_regex9_DEPENDENCIES) $(EXTRA_testsuite_bug_regex9_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/bug-regex9$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_bug_regex9_OBJECTS) $(testsuite_bug_regex9_LDADD) $(LIBS) testsuite/get-mb-cur-max.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/get-mb-cur-max$(EXEEXT): $(testsuite_get_mb_cur_max_OBJECTS) $(testsuite_get_mb_cur_max_DEPENDENCIES) $(EXTRA_testsuite_get_mb_cur_max_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/get-mb-cur-max$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_get_mb_cur_max_OBJECTS) $(testsuite_get_mb_cur_max_LDADD) $(LIBS) testsuite/runptests.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/runptests$(EXEEXT): $(testsuite_runptests_OBJECTS) $(testsuite_runptests_DEPENDENCIES) $(EXTRA_testsuite_runptests_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/runptests$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_runptests_OBJECTS) $(testsuite_runptests_LDADD) $(LIBS) testsuite/runtests.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/runtests$(EXEEXT): $(testsuite_runtests_OBJECTS) $(testsuite_runtests_DEPENDENCIES) $(EXTRA_testsuite_runtests_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/runtests$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_runtests_OBJECTS) $(testsuite_runtests_LDADD) $(LIBS) testsuite/test-mbrtowc.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/test-mbrtowc$(EXEEXT): $(testsuite_test_mbrtowc_OBJECTS) $(testsuite_test_mbrtowc_DEPENDENCIES) $(EXTRA_testsuite_test_mbrtowc_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/test-mbrtowc$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_test_mbrtowc_OBJECTS) $(testsuite_test_mbrtowc_LDADD) $(LIBS) testsuite/tst-boost.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/tst-boost$(EXEEXT): $(testsuite_tst_boost_OBJECTS) $(testsuite_tst_boost_DEPENDENCIES) $(EXTRA_testsuite_tst_boost_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/tst-boost$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_tst_boost_OBJECTS) $(testsuite_tst_boost_LDADD) $(LIBS) testsuite/tst-pcre.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/tst-pcre$(EXEEXT): $(testsuite_tst_pcre_OBJECTS) $(testsuite_tst_pcre_DEPENDENCIES) $(EXTRA_testsuite_tst_pcre_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/tst-pcre$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_tst_pcre_OBJECTS) $(testsuite_tst_pcre_LDADD) $(LIBS) testsuite/tst-regex2.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/tst-regex2$(EXEEXT): $(testsuite_tst_regex2_OBJECTS) $(testsuite_tst_regex2_DEPENDENCIES) $(EXTRA_testsuite_tst_regex2_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/tst-regex2$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_tst_regex2_OBJECTS) $(testsuite_tst_regex2_LDADD) $(LIBS) testsuite/tst-rxspencer.$(OBJEXT): testsuite/$(am__dirstamp) \ testsuite/$(DEPDIR)/$(am__dirstamp) testsuite/tst-rxspencer$(EXEEXT): $(testsuite_tst_rxspencer_OBJECTS) $(testsuite_tst_rxspencer_DEPENDENCIES) $(EXTRA_testsuite_tst_rxspencer_DEPENDENCIES) testsuite/$(am__dirstamp) @rm -f testsuite/tst-rxspencer$(EXEEXT) $(AM_V_CCLD)$(LINK) $(testsuite_tst_rxspencer_OBJECTS) $(testsuite_tst_rxspencer_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) -rm -f lib/*.$(OBJEXT) -rm -f lib/glthread/*.$(OBJEXT) -rm -f sed/*.$(OBJEXT) -rm -f testsuite/*.$(OBJEXT) distclean-compile: -rm -f *.tab.c include lib/$(DEPDIR)/acl-errno-valid.Po # am--include-marker include lib/$(DEPDIR)/acl-internal.Po # am--include-marker include lib/$(DEPDIR)/acl_entries.Po # am--include-marker include lib/$(DEPDIR)/alloca.Po # am--include-marker include lib/$(DEPDIR)/basename-lgpl.Po # am--include-marker include lib/$(DEPDIR)/btowc.Po # am--include-marker include lib/$(DEPDIR)/c-ctype.Po # am--include-marker include lib/$(DEPDIR)/c-strcasecmp.Po # am--include-marker include lib/$(DEPDIR)/c-strncasecmp.Po # am--include-marker include lib/$(DEPDIR)/canonicalize-lgpl.Po # am--include-marker include lib/$(DEPDIR)/close-stream.Po # am--include-marker include lib/$(DEPDIR)/closeout.Po # am--include-marker include lib/$(DEPDIR)/copy-acl.Po # am--include-marker include lib/$(DEPDIR)/dfa.Po # am--include-marker include lib/$(DEPDIR)/dirname-lgpl.Po # am--include-marker include lib/$(DEPDIR)/error.Po # am--include-marker include lib/$(DEPDIR)/exitfail.Po # am--include-marker include lib/$(DEPDIR)/fpending.Po # am--include-marker include lib/$(DEPDIR)/fstat.Po # am--include-marker include lib/$(DEPDIR)/fwriting.Po # am--include-marker include lib/$(DEPDIR)/get-permissions.Po # am--include-marker include lib/$(DEPDIR)/getdelim.Po # am--include-marker include lib/$(DEPDIR)/getfilecon.Po # am--include-marker include lib/$(DEPDIR)/getopt.Po # am--include-marker include lib/$(DEPDIR)/getopt1.Po # am--include-marker include lib/$(DEPDIR)/getprogname.Po # am--include-marker include lib/$(DEPDIR)/gettimeofday.Po # am--include-marker include lib/$(DEPDIR)/hard-locale.Po # am--include-marker include lib/$(DEPDIR)/isblank.Po # am--include-marker include lib/$(DEPDIR)/localcharset.Po # am--include-marker include lib/$(DEPDIR)/localeconv.Po # am--include-marker include lib/$(DEPDIR)/localeinfo.Po # am--include-marker include lib/$(DEPDIR)/lstat.Po # am--include-marker include lib/$(DEPDIR)/malloc.Po # am--include-marker include lib/$(DEPDIR)/malloca.Po # am--include-marker include lib/$(DEPDIR)/mbrlen.Po # am--include-marker include lib/$(DEPDIR)/mbrtowc.Po # am--include-marker include lib/$(DEPDIR)/mbsinit.Po # am--include-marker include lib/$(DEPDIR)/mbtowc.Po # am--include-marker include lib/$(DEPDIR)/memchr.Po # am--include-marker include lib/$(DEPDIR)/memrchr.Po # am--include-marker include lib/$(DEPDIR)/mkostemp.Po # am--include-marker include lib/$(DEPDIR)/msvc-inval.Po # am--include-marker include lib/$(DEPDIR)/msvc-nothrow.Po # am--include-marker include lib/$(DEPDIR)/nl_langinfo.Po # am--include-marker include lib/$(DEPDIR)/obstack.Po # am--include-marker include lib/$(DEPDIR)/progname.Po # am--include-marker include lib/$(DEPDIR)/qcopy-acl.Po # am--include-marker include lib/$(DEPDIR)/qset-acl.Po # am--include-marker include lib/$(DEPDIR)/quotearg.Po # am--include-marker include lib/$(DEPDIR)/readlink.Po # am--include-marker include lib/$(DEPDIR)/regcomp.Po # am--include-marker include lib/$(DEPDIR)/regex.Po # am--include-marker include lib/$(DEPDIR)/regex_internal.Po # am--include-marker include lib/$(DEPDIR)/regexec.Po # am--include-marker include lib/$(DEPDIR)/rename.Po # am--include-marker include lib/$(DEPDIR)/rmdir.Po # am--include-marker include lib/$(DEPDIR)/se-context.Po # am--include-marker include lib/$(DEPDIR)/se-selinux.Po # am--include-marker include lib/$(DEPDIR)/secure_getenv.Po # am--include-marker include lib/$(DEPDIR)/set-acl.Po # am--include-marker include lib/$(DEPDIR)/set-permissions.Po # am--include-marker include lib/$(DEPDIR)/stat.Po # am--include-marker include lib/$(DEPDIR)/strerror-override.Po # am--include-marker include lib/$(DEPDIR)/strerror.Po # am--include-marker include lib/$(DEPDIR)/stripslash.Po # am--include-marker include lib/$(DEPDIR)/strverscmp.Po # am--include-marker include lib/$(DEPDIR)/tempname.Po # am--include-marker include lib/$(DEPDIR)/unistd.Po # am--include-marker include lib/$(DEPDIR)/version-etc-fsf.Po # am--include-marker include lib/$(DEPDIR)/version-etc.Po # am--include-marker include lib/$(DEPDIR)/wcrtomb.Po # am--include-marker include lib/$(DEPDIR)/wctob.Po # am--include-marker include lib/$(DEPDIR)/wctomb.Po # am--include-marker include lib/$(DEPDIR)/wctype-h.Po # am--include-marker include lib/$(DEPDIR)/xalloc-die.Po # am--include-marker include lib/$(DEPDIR)/xmalloc.Po # am--include-marker include lib/glthread/$(DEPDIR)/lock.Po # am--include-marker include lib/glthread/$(DEPDIR)/threadlib.Po # am--include-marker include sed/$(DEPDIR)/sed_sed-compile.Po # am--include-marker include sed/$(DEPDIR)/sed_sed-execute.Po # am--include-marker include sed/$(DEPDIR)/sed_sed-mbcs.Po # am--include-marker include sed/$(DEPDIR)/sed_sed-regexp.Po # am--include-marker include sed/$(DEPDIR)/sed_sed-sed.Po # am--include-marker include sed/$(DEPDIR)/sed_sed-utils.Po # am--include-marker include sed/$(DEPDIR)/version.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex10.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex11.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex12.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex13.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex14.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex15.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex16.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex21.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex27.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex28.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex7.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex8.Po # am--include-marker include testsuite/$(DEPDIR)/bug-regex9.Po # am--include-marker include testsuite/$(DEPDIR)/get-mb-cur-max.Po # am--include-marker include testsuite/$(DEPDIR)/runptests.Po # am--include-marker include testsuite/$(DEPDIR)/runtests.Po # am--include-marker include testsuite/$(DEPDIR)/test-mbrtowc.Po # am--include-marker include testsuite/$(DEPDIR)/tst-boost.Po # am--include-marker include testsuite/$(DEPDIR)/tst-pcre.Po # am--include-marker include testsuite/$(DEPDIR)/tst-regex2.Po # am--include-marker include testsuite/$(DEPDIR)/tst-rxspencer.Po # am--include-marker $(am__depfiles_remade): @$(MKDIR_P) $(@D) @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) .c.o: $(AM_V_CC)$(am__set_depbase) && \ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $<; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='$<' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(COMPILE) -c -o $@ $< .c.obj: $(AM_V_CC)$(am__set_depbase) && \ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) $<); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='$<' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(COMPILE) -c -o $@ $$($(CYGPATH_W) $<) sed/sed_sed-compile.o: sed/compile.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `test -f 'sed/compile.c' || echo '$(srcdir)/'`sed/compile.c; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/compile.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ `test -f 'sed/compile.c' || echo '$(srcdir)/'`sed/compile.c sed/sed_sed-compile.obj: sed/compile.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) `test -f 'sed/compile.c' || echo '$(srcdir)/'`sed/compile.c); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/compile.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ $$($(CYGPATH_W) `test -f 'sed/compile.c' || echo '$(srcdir)/'`sed/compile.c) sed/sed_sed-execute.o: sed/execute.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `test -f 'sed/execute.c' || echo '$(srcdir)/'`sed/execute.c; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/execute.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ `test -f 'sed/execute.c' || echo '$(srcdir)/'`sed/execute.c sed/sed_sed-execute.obj: sed/execute.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) `test -f 'sed/execute.c' || echo '$(srcdir)/'`sed/execute.c); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/execute.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ $$($(CYGPATH_W) `test -f 'sed/execute.c' || echo '$(srcdir)/'`sed/execute.c) sed/sed_sed-mbcs.o: sed/mbcs.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `test -f 'sed/mbcs.c' || echo '$(srcdir)/'`sed/mbcs.c; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/mbcs.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ `test -f 'sed/mbcs.c' || echo '$(srcdir)/'`sed/mbcs.c sed/sed_sed-mbcs.obj: sed/mbcs.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) `test -f 'sed/mbcs.c' || echo '$(srcdir)/'`sed/mbcs.c); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/mbcs.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ $$($(CYGPATH_W) `test -f 'sed/mbcs.c' || echo '$(srcdir)/'`sed/mbcs.c) sed/sed_sed-regexp.o: sed/regexp.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `test -f 'sed/regexp.c' || echo '$(srcdir)/'`sed/regexp.c; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/regexp.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ `test -f 'sed/regexp.c' || echo '$(srcdir)/'`sed/regexp.c sed/sed_sed-regexp.obj: sed/regexp.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) `test -f 'sed/regexp.c' || echo '$(srcdir)/'`sed/regexp.c); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/regexp.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ $$($(CYGPATH_W) `test -f 'sed/regexp.c' || echo '$(srcdir)/'`sed/regexp.c) sed/sed_sed-sed.o: sed/sed.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `test -f 'sed/sed.c' || echo '$(srcdir)/'`sed/sed.c; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/sed.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ `test -f 'sed/sed.c' || echo '$(srcdir)/'`sed/sed.c sed/sed_sed-sed.obj: sed/sed.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) `test -f 'sed/sed.c' || echo '$(srcdir)/'`sed/sed.c); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/sed.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ $$($(CYGPATH_W) `test -f 'sed/sed.c' || echo '$(srcdir)/'`sed/sed.c) sed/sed_sed-utils.o: sed/utils.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `test -f 'sed/utils.c' || echo '$(srcdir)/'`sed/utils.c; \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/utils.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ `test -f 'sed/utils.c' || echo '$(srcdir)/'`sed/utils.c sed/sed_sed-utils.obj: sed/utils.c $(AM_V_CC)$(am__set_depbase) && \ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $$($(CYGPATH_W) `test -f 'sed/utils.c' || echo '$(srcdir)/'`sed/utils.c); \ if test $$? = 0; then $(am__mv) $$depbase.Tpo $$depbase.Po; \ else rm -f $$depbase.Tpo; false; fi # $(AM_V_CC)source='sed/utils.c' object='$@' libtool=no \ # DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ # $(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(sed_sed_CPPFLAGS) $(CPPFLAGS) $(sed_sed_CFLAGS) $(CFLAGS) -c -o $@ $$($(CYGPATH_W) `test -f 'sed/utils.c' || echo '$(srcdir)/'`sed/utils.c) doc/$(am__dirstamp): @$(MKDIR_P) doc @: > doc/$(am__dirstamp) $(srcdir)/doc/sed.info: doc/sed.texi $(srcdir)/doc/version.texi $(doc_sed_TEXINFOS) $(AM_V_MAKEINFO)$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \ -I doc -I $(srcdir)/doc --no-split -o $@-t \ $(srcdir)/doc/sed.texi $(AM_V_at)mv -f $@-t $@ doc/sed.dvi: doc/sed.texi $(srcdir)/doc/version.texi $(doc_sed_TEXINFOS) doc/$(am__dirstamp) $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \ `test -f 'doc/sed.texi' || echo '$(srcdir)/'`doc/sed.texi doc/sed.pdf: doc/sed.texi $(srcdir)/doc/version.texi $(doc_sed_TEXINFOS) doc/$(am__dirstamp) $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \ `test -f 'doc/sed.texi' || echo '$(srcdir)/'`doc/sed.texi doc/sed.html: doc/sed.texi $(srcdir)/doc/version.texi $(doc_sed_TEXINFOS) doc/$(am__dirstamp) $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp) $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ -o $(@:.html=.htp) `test -f 'doc/sed.texi' || echo '$(srcdir)/'`doc/sed.texi; \ then \ rm -rf $@ && mv $(@:.html=.htp) $@; \ else \ rm -rf $(@:.html=.htp); exit 1; \ fi $(srcdir)/doc/version.texi: $(srcdir)/doc/stamp-vti $(srcdir)/doc/stamp-vti: doc/sed.texi $(top_srcdir)/configure @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp) @(dir=.; test -f ./doc/sed.texi || dir=$(srcdir); \ set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/doc/sed.texi`; \ echo "@set UPDATED $$1 $$2 $$3"; \ echo "@set UPDATED-MONTH $$2 $$3"; \ echo "@set EDITION $(VERSION)"; \ echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \ (cmp -s vti.tmp$$$$ $(srcdir)/doc/version.texi \ || (echo "Updating $(srcdir)/doc/version.texi" && \ cp vti.tmp$$$$ $(srcdir)/doc/version.texi.tmp$$$$ && \ mv $(srcdir)/doc/version.texi.tmp$$$$ $(srcdir)/doc/version.texi)) && \ rm -f vti.tmp$$$$ $(srcdir)/doc/version.texi.$$$$ @cp $(srcdir)/doc/version.texi $@ mostlyclean-vti: -rm -f vti.tmp* $(srcdir)/doc/version.texi.tmp* maintainer-clean-vti: -rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi .dvi.ps: $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) $(AM_V_texinfo) -o $@ $< uninstall-dvi-am: @$(NORMAL_UNINSTALL) @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ rm -f "$(DESTDIR)$(dvidir)/$$f"; \ done uninstall-html-am: @$(NORMAL_UNINSTALL) @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-info-am: @$(PRE_UNINSTALL) @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile"; \ rm -f $$relfile; \ else :; fi); \ done uninstall-pdf-am: @$(NORMAL_UNINSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ done uninstall-ps-am: @$(NORMAL_UNINSTALL) @list='$(PSS)'; test -n "$(psdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ rm -f "$(DESTDIR)$(psdir)/$$f"; \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then \ file=./$$base; \ else \ file=$(srcdir)/$$base; \ fi; \ if test -f $$file && test ! -f "$(distdir)/$$base"; then \ cp -p $$file "$(distdir)/$$base"; \ fi; \ done mostlyclean-aminfo: -rm -rf doc/sed.t2d doc/sed.t2p clean-aminfo: -test -z "doc/sed.dvi doc/sed.pdf doc/sed.ps doc/sed.html" \ || rm -rf doc/sed.dvi doc/sed.pdf doc/sed.ps doc/sed.html maintainer-clean-aminfo: -test -z "$(INFO_DEPS)" || rm -f $(INFO_DEPS) install-man1: $(dist_man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(dist_man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-recursive TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-recursive CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-recursive cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files # Recover from deleted '.trs' file; this should ensure that # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells # to avoid problems with "make -n". .log.trs: rm -f $< $@ $(MAKE) $(AM_MAKEFLAGS) $< # Leading 'am--fnord' is there to ensure the list of targets does not # expand to empty, as could happen e.g. with make check TESTS=''. am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ redo_bases=`for i in $$bases; do \ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ done`; \ if test -n "$$redo_bases"; then \ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ if $(am__make_dryrun); then :; else \ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ fi; \ fi; \ if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ elif test -n "$$redo_logs"; then \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ st=0; \ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ for i in $$redo_bases; do \ test -f $$i.trs && test -r $$i.trs \ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ test -f $$i.log && test -r $$i.log \ || { echo "$$errmsg $$i.log" >&2; st=1; }; \ done; \ test $$st -eq 0 || exit 1; \ fi @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ ws='[ ]'; \ results=`for b in $$bases; do echo $$b.trs; done`; \ test -n "$$results" || results=/dev/null; \ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ if test `expr $$fail + $$xpass + $$error` -eq 0; then \ success=true; \ else \ success=false; \ fi; \ br='==================='; br=$$br$$br$$br$$br; \ result_count () \ { \ if test x"$$1" = x"--maybe-color"; then \ maybe_colorize=yes; \ elif test x"$$1" = x"--no-color"; then \ maybe_colorize=no; \ else \ echo "$@: invalid 'result_count' usage" >&2; exit 4; \ fi; \ shift; \ desc=$$1 count=$$2; \ if test $$maybe_colorize = yes && test $$count -gt 0; then \ color_start=$$3 color_end=$$std; \ else \ color_start= color_end=; \ fi; \ echo "$${color_start}# $$desc $$count$${color_end}"; \ }; \ create_testsuite_report () \ { \ result_count $$1 "TOTAL:" $$all "$$brg"; \ result_count $$1 "PASS: " $$pass "$$grn"; \ result_count $$1 "SKIP: " $$skip "$$blu"; \ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ result_count $$1 "FAIL: " $$fail "$$red"; \ result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ $(am__rst_title); \ create_testsuite_report --no-color; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ for b in $$bases; do echo $$b; done \ | $(am__create_global_log); \ } >$(TEST_SUITE_LOG).tmp || exit 1; \ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ if $$success; then \ col="$$grn"; \ else \ col="$$red"; \ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ fi; \ echo "$${col}$$br$${std}"; \ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ echo "$${col}$$br$${std}"; \ create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ if test -n "$(PACKAGE_BUGREPORT)"; then \ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ fi; \ echo "$$col$$br$$std"; \ fi; \ $$success || exit 1 check-TESTS: @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ log_list=`for i in $$bases; do echo $$i.log; done`; \ trs_list=`for i in $$bases; do echo $$i.trs; done`; \ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ exit $$?; recheck: all $(check_PROGRAMS) @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ bases=`for i in $$bases; do echo $$i; done \ | $(am__list_recheck_tests)` || exit 1; \ log_list=`for i in $$bases; do echo $$i.log; done`; \ log_list=`echo $$log_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ am__force_recheck=am--force-recheck \ TEST_LOGS="$$log_list"; \ exit $$? testsuite/get-mb-cur-max.log: testsuite/get-mb-cur-max$(EXEEXT) @p='testsuite/get-mb-cur-max$(EXEEXT)'; \ b='testsuite/get-mb-cur-max'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/test-mbrtowc.log: testsuite/test-mbrtowc$(EXEEXT) @p='testsuite/test-mbrtowc$(EXEEXT)'; \ b='testsuite/test-mbrtowc'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex7.log: testsuite/bug-regex7$(EXEEXT) @p='testsuite/bug-regex7$(EXEEXT)'; \ b='testsuite/bug-regex7'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex8.log: testsuite/bug-regex8$(EXEEXT) @p='testsuite/bug-regex8$(EXEEXT)'; \ b='testsuite/bug-regex8'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex9.log: testsuite/bug-regex9$(EXEEXT) @p='testsuite/bug-regex9$(EXEEXT)'; \ b='testsuite/bug-regex9'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex10.log: testsuite/bug-regex10$(EXEEXT) @p='testsuite/bug-regex10$(EXEEXT)'; \ b='testsuite/bug-regex10'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex11.log: testsuite/bug-regex11$(EXEEXT) @p='testsuite/bug-regex11$(EXEEXT)'; \ b='testsuite/bug-regex11'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex12.log: testsuite/bug-regex12$(EXEEXT) @p='testsuite/bug-regex12$(EXEEXT)'; \ b='testsuite/bug-regex12'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex13.log: testsuite/bug-regex13$(EXEEXT) @p='testsuite/bug-regex13$(EXEEXT)'; \ b='testsuite/bug-regex13'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex14.log: testsuite/bug-regex14$(EXEEXT) @p='testsuite/bug-regex14$(EXEEXT)'; \ b='testsuite/bug-regex14'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex15.log: testsuite/bug-regex15$(EXEEXT) @p='testsuite/bug-regex15$(EXEEXT)'; \ b='testsuite/bug-regex15'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex16.log: testsuite/bug-regex16$(EXEEXT) @p='testsuite/bug-regex16$(EXEEXT)'; \ b='testsuite/bug-regex16'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex21.log: testsuite/bug-regex21$(EXEEXT) @p='testsuite/bug-regex21$(EXEEXT)'; \ b='testsuite/bug-regex21'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex27.log: testsuite/bug-regex27$(EXEEXT) @p='testsuite/bug-regex27$(EXEEXT)'; \ b='testsuite/bug-regex27'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bug-regex28.log: testsuite/bug-regex28$(EXEEXT) @p='testsuite/bug-regex28$(EXEEXT)'; \ b='testsuite/bug-regex28'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/tst-pcre.log: testsuite/tst-pcre$(EXEEXT) @p='testsuite/tst-pcre$(EXEEXT)'; \ b='testsuite/tst-pcre'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/tst-boost.log: testsuite/tst-boost$(EXEEXT) @p='testsuite/tst-boost$(EXEEXT)'; \ b='testsuite/tst-boost'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/runtests.log: testsuite/runtests$(EXEEXT) @p='testsuite/runtests$(EXEEXT)'; \ b='testsuite/runtests'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/runptests.log: testsuite/runptests$(EXEEXT) @p='testsuite/runptests$(EXEEXT)'; \ b='testsuite/runptests'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/tst-rxspencer.log: testsuite/tst-rxspencer$(EXEEXT) @p='testsuite/tst-rxspencer$(EXEEXT)'; \ b='testsuite/tst-rxspencer'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/tst-regex2.log: testsuite/tst-regex2$(EXEEXT) @p='testsuite/tst-regex2$(EXEEXT)'; \ b='testsuite/tst-regex2'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) space.log: space @p='space'; \ b='space'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/appquit.log: testsuite/appquit @p='testsuite/appquit'; \ b='testsuite/appquit'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/enable.log: testsuite/enable @p='testsuite/enable'; \ b='testsuite/enable'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/sep.log: testsuite/sep @p='testsuite/sep'; \ b='testsuite/sep'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/inclib.log: testsuite/inclib @p='testsuite/inclib'; \ b='testsuite/inclib'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/8bit.log: testsuite/8bit @p='testsuite/8bit'; \ b='testsuite/8bit'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/newjis.log: testsuite/newjis @p='testsuite/newjis'; \ b='testsuite/newjis'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/xabcx.log: testsuite/xabcx @p='testsuite/xabcx'; \ b='testsuite/xabcx'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/dollar.log: testsuite/dollar @p='testsuite/dollar'; \ b='testsuite/dollar'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/noeol.log: testsuite/noeol @p='testsuite/noeol'; \ b='testsuite/noeol'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/noeolw.log: testsuite/noeolw @p='testsuite/noeolw'; \ b='testsuite/noeolw'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/modulo.log: testsuite/modulo @p='testsuite/modulo'; \ b='testsuite/modulo'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/numsub.log: testsuite/numsub @p='testsuite/numsub'; \ b='testsuite/numsub'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/numsub2.log: testsuite/numsub2 @p='testsuite/numsub2'; \ b='testsuite/numsub2'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/numsub3.log: testsuite/numsub3 @p='testsuite/numsub3'; \ b='testsuite/numsub3'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/numsub4.log: testsuite/numsub4 @p='testsuite/numsub4'; \ b='testsuite/numsub4'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/numsub5.log: testsuite/numsub5 @p='testsuite/numsub5'; \ b='testsuite/numsub5'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/0range.log: testsuite/0range @p='testsuite/0range'; \ b='testsuite/0range'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bkslashes.log: testsuite/bkslashes @p='testsuite/bkslashes'; \ b='testsuite/bkslashes'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/head.log: testsuite/head @p='testsuite/head'; \ b='testsuite/head'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/madding.log: testsuite/madding @p='testsuite/madding'; \ b='testsuite/madding'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/mac-mf.log: testsuite/mac-mf @p='testsuite/mac-mf'; \ b='testsuite/mac-mf'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/empty.log: testsuite/empty @p='testsuite/empty'; \ b='testsuite/empty'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/xbxcx.log: testsuite/xbxcx @p='testsuite/xbxcx'; \ b='testsuite/xbxcx'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/xbxcx3.log: testsuite/xbxcx3 @p='testsuite/xbxcx3'; \ b='testsuite/xbxcx3'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/recall.log: testsuite/recall @p='testsuite/recall'; \ b='testsuite/recall'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/recall2.log: testsuite/recall2 @p='testsuite/recall2'; \ b='testsuite/recall2'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/xemacs.log: testsuite/xemacs @p='testsuite/xemacs'; \ b='testsuite/xemacs'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/fasts.log: testsuite/fasts @p='testsuite/fasts'; \ b='testsuite/fasts'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/uniq.log: testsuite/uniq @p='testsuite/uniq'; \ b='testsuite/uniq'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/manis.log: testsuite/manis @p='testsuite/manis'; \ b='testsuite/manis'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/khadafy.log: testsuite/khadafy @p='testsuite/khadafy'; \ b='testsuite/khadafy'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/linecnt.log: testsuite/linecnt @p='testsuite/linecnt'; \ b='testsuite/linecnt'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/eval.log: testsuite/eval @p='testsuite/eval'; \ b='testsuite/eval'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/distrib.log: testsuite/distrib @p='testsuite/distrib'; \ b='testsuite/distrib'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/8to7.log: testsuite/8to7 @p='testsuite/8to7'; \ b='testsuite/8to7'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/y-bracket.log: testsuite/y-bracket @p='testsuite/y-bracket'; \ b='testsuite/y-bracket'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/y-newline.log: testsuite/y-newline @p='testsuite/y-newline'; \ b='testsuite/y-newline'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/y-zero.log: testsuite/y-zero @p='testsuite/y-zero'; \ b='testsuite/y-zero'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/allsub.log: testsuite/allsub @p='testsuite/allsub'; \ b='testsuite/allsub'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/cv-vars.log: testsuite/cv-vars @p='testsuite/cv-vars'; \ b='testsuite/cv-vars'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/classes.log: testsuite/classes @p='testsuite/classes'; \ b='testsuite/classes'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/middle.log: testsuite/middle @p='testsuite/middle'; \ b='testsuite/middle'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/bsd.log: testsuite/bsd @p='testsuite/bsd'; \ b='testsuite/bsd'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/stdin.log: testsuite/stdin @p='testsuite/stdin'; \ b='testsuite/stdin'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/flipcase.log: testsuite/flipcase @p='testsuite/flipcase'; \ b='testsuite/flipcase'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/insens.log: testsuite/insens @p='testsuite/insens'; \ b='testsuite/insens'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/subwrite.log: testsuite/subwrite @p='testsuite/subwrite'; \ b='testsuite/subwrite'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/writeout.log: testsuite/writeout @p='testsuite/writeout'; \ b='testsuite/writeout'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/readin.log: testsuite/readin @p='testsuite/readin'; \ b='testsuite/readin'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/insert.log: testsuite/insert @p='testsuite/insert'; \ b='testsuite/insert'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/utf8-1.log: testsuite/utf8-1 @p='testsuite/utf8-1'; \ b='testsuite/utf8-1'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/utf8-2.log: testsuite/utf8-2 @p='testsuite/utf8-2'; \ b='testsuite/utf8-2'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/utf8-3.log: testsuite/utf8-3 @p='testsuite/utf8-3'; \ b='testsuite/utf8-3'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/utf8-4.log: testsuite/utf8-4 @p='testsuite/utf8-4'; \ b='testsuite/utf8-4'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/badenc.log: testsuite/badenc @p='testsuite/badenc'; \ b='testsuite/badenc'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/inplace-hold.log: testsuite/inplace-hold @p='testsuite/inplace-hold'; \ b='testsuite/inplace-hold'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/brackets.log: testsuite/brackets @p='testsuite/brackets'; \ b='testsuite/brackets'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/amp-escape.log: testsuite/amp-escape @p='testsuite/amp-escape'; \ b='testsuite/amp-escape'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/help.log: testsuite/help @p='testsuite/help'; \ b='testsuite/help'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/file.log: testsuite/file @p='testsuite/file'; \ b='testsuite/file'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/quiet.log: testsuite/quiet @p='testsuite/quiet'; \ b='testsuite/quiet'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/factor.log: testsuite/factor @p='testsuite/factor'; \ b='testsuite/factor'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/binary3.log: testsuite/binary3 @p='testsuite/binary3'; \ b='testsuite/binary3'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/binary2.log: testsuite/binary2 @p='testsuite/binary2'; \ b='testsuite/binary2'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/binary.log: testsuite/binary @p='testsuite/binary'; \ b='testsuite/binary'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/dc.log: testsuite/dc @p='testsuite/dc'; \ b='testsuite/dc'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/newline-anchor.log: testsuite/newline-anchor @p='testsuite/newline-anchor'; \ b='testsuite/newline-anchor'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) testsuite/zero-anchor.log: testsuite/zero-anchor @p='testsuite/zero-anchor'; \ b='testsuite/zero-anchor'; \ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) .sh.log: @p='$<'; \ $(am__set_b); \ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ "$$tst" $(AM_TESTS_FD_REDIRECT) #.sh$(EXEEXT).log: # @p='$<'; \ # $(am__set_b); \ # $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ # --log-file $$b.log --trs-file $$b.trs \ # $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ # "$$tst" $(AM_TESTS_FD_REDIRECT) distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ || test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info dist-hook -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive all-am: Makefile $(INFO_DEPS) $(LIBRARIES) $(PROGRAMS) $(MANS) $(DATA) \ $(HEADERS) config.h all-local installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(ALLOCA)" || rm -f $(ALLOCA) -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -rm -f doc/$(am__dirstamp) -rm -f lib/$(DEPDIR)/$(am__dirstamp) -rm -f lib/$(am__dirstamp) -rm -f lib/glthread/$(DEPDIR)/$(am__dirstamp) -rm -f lib/glthread/$(am__dirstamp) -rm -f sed/$(DEPDIR)/$(am__dirstamp) -rm -f sed/$(am__dirstamp) -rm -f testsuite/$(DEPDIR)/$(am__dirstamp) -rm -f testsuite/$(am__dirstamp) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-aminfo clean-binPROGRAMS clean-checkPROGRAMS \ clean-generic clean-noinstLIBRARIES mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f lib/$(DEPDIR)/acl-errno-valid.Po -rm -f lib/$(DEPDIR)/acl-internal.Po -rm -f lib/$(DEPDIR)/acl_entries.Po -rm -f lib/$(DEPDIR)/alloca.Po -rm -f lib/$(DEPDIR)/basename-lgpl.Po -rm -f lib/$(DEPDIR)/btowc.Po -rm -f lib/$(DEPDIR)/c-ctype.Po -rm -f lib/$(DEPDIR)/c-strcasecmp.Po -rm -f lib/$(DEPDIR)/c-strncasecmp.Po -rm -f lib/$(DEPDIR)/canonicalize-lgpl.Po -rm -f lib/$(DEPDIR)/close-stream.Po -rm -f lib/$(DEPDIR)/closeout.Po -rm -f lib/$(DEPDIR)/copy-acl.Po -rm -f lib/$(DEPDIR)/dfa.Po -rm -f lib/$(DEPDIR)/dirname-lgpl.Po -rm -f lib/$(DEPDIR)/error.Po -rm -f lib/$(DEPDIR)/exitfail.Po -rm -f lib/$(DEPDIR)/fpending.Po -rm -f lib/$(DEPDIR)/fstat.Po -rm -f lib/$(DEPDIR)/fwriting.Po -rm -f lib/$(DEPDIR)/get-permissions.Po -rm -f lib/$(DEPDIR)/getdelim.Po -rm -f lib/$(DEPDIR)/getfilecon.Po -rm -f lib/$(DEPDIR)/getopt.Po -rm -f lib/$(DEPDIR)/getopt1.Po -rm -f lib/$(DEPDIR)/getprogname.Po -rm -f lib/$(DEPDIR)/gettimeofday.Po -rm -f lib/$(DEPDIR)/hard-locale.Po -rm -f lib/$(DEPDIR)/isblank.Po -rm -f lib/$(DEPDIR)/localcharset.Po -rm -f lib/$(DEPDIR)/localeconv.Po -rm -f lib/$(DEPDIR)/localeinfo.Po -rm -f lib/$(DEPDIR)/lstat.Po -rm -f lib/$(DEPDIR)/malloc.Po -rm -f lib/$(DEPDIR)/malloca.Po -rm -f lib/$(DEPDIR)/mbrlen.Po -rm -f lib/$(DEPDIR)/mbrtowc.Po -rm -f lib/$(DEPDIR)/mbsinit.Po -rm -f lib/$(DEPDIR)/mbtowc.Po -rm -f lib/$(DEPDIR)/memchr.Po -rm -f lib/$(DEPDIR)/memrchr.Po -rm -f lib/$(DEPDIR)/mkostemp.Po -rm -f lib/$(DEPDIR)/msvc-inval.Po -rm -f lib/$(DEPDIR)/msvc-nothrow.Po -rm -f lib/$(DEPDIR)/nl_langinfo.Po -rm -f lib/$(DEPDIR)/obstack.Po -rm -f lib/$(DEPDIR)/progname.Po -rm -f lib/$(DEPDIR)/qcopy-acl.Po -rm -f lib/$(DEPDIR)/qset-acl.Po -rm -f lib/$(DEPDIR)/quotearg.Po -rm -f lib/$(DEPDIR)/readlink.Po -rm -f lib/$(DEPDIR)/regcomp.Po -rm -f lib/$(DEPDIR)/regex.Po -rm -f lib/$(DEPDIR)/regex_internal.Po -rm -f lib/$(DEPDIR)/regexec.Po -rm -f lib/$(DEPDIR)/rename.Po -rm -f lib/$(DEPDIR)/rmdir.Po -rm -f lib/$(DEPDIR)/se-context.Po -rm -f lib/$(DEPDIR)/se-selinux.Po -rm -f lib/$(DEPDIR)/secure_getenv.Po -rm -f lib/$(DEPDIR)/set-acl.Po -rm -f lib/$(DEPDIR)/set-permissions.Po -rm -f lib/$(DEPDIR)/stat.Po -rm -f lib/$(DEPDIR)/strerror-override.Po -rm -f lib/$(DEPDIR)/strerror.Po -rm -f lib/$(DEPDIR)/stripslash.Po -rm -f lib/$(DEPDIR)/strverscmp.Po -rm -f lib/$(DEPDIR)/tempname.Po -rm -f lib/$(DEPDIR)/unistd.Po -rm -f lib/$(DEPDIR)/version-etc-fsf.Po -rm -f lib/$(DEPDIR)/version-etc.Po -rm -f lib/$(DEPDIR)/wcrtomb.Po -rm -f lib/$(DEPDIR)/wctob.Po -rm -f lib/$(DEPDIR)/wctomb.Po -rm -f lib/$(DEPDIR)/wctype-h.Po -rm -f lib/$(DEPDIR)/xalloc-die.Po -rm -f lib/$(DEPDIR)/xmalloc.Po -rm -f lib/glthread/$(DEPDIR)/lock.Po -rm -f lib/glthread/$(DEPDIR)/threadlib.Po -rm -f sed/$(DEPDIR)/sed_sed-compile.Po -rm -f sed/$(DEPDIR)/sed_sed-execute.Po -rm -f sed/$(DEPDIR)/sed_sed-mbcs.Po -rm -f sed/$(DEPDIR)/sed_sed-regexp.Po -rm -f sed/$(DEPDIR)/sed_sed-sed.Po -rm -f sed/$(DEPDIR)/sed_sed-utils.Po -rm -f sed/$(DEPDIR)/version.Po -rm -f testsuite/$(DEPDIR)/bug-regex10.Po -rm -f testsuite/$(DEPDIR)/bug-regex11.Po -rm -f testsuite/$(DEPDIR)/bug-regex12.Po -rm -f testsuite/$(DEPDIR)/bug-regex13.Po -rm -f testsuite/$(DEPDIR)/bug-regex14.Po -rm -f testsuite/$(DEPDIR)/bug-regex15.Po -rm -f testsuite/$(DEPDIR)/bug-regex16.Po -rm -f testsuite/$(DEPDIR)/bug-regex21.Po -rm -f testsuite/$(DEPDIR)/bug-regex27.Po -rm -f testsuite/$(DEPDIR)/bug-regex28.Po -rm -f testsuite/$(DEPDIR)/bug-regex7.Po -rm -f testsuite/$(DEPDIR)/bug-regex8.Po -rm -f testsuite/$(DEPDIR)/bug-regex9.Po -rm -f testsuite/$(DEPDIR)/get-mb-cur-max.Po -rm -f testsuite/$(DEPDIR)/runptests.Po -rm -f testsuite/$(DEPDIR)/runtests.Po -rm -f testsuite/$(DEPDIR)/test-mbrtowc.Po -rm -f testsuite/$(DEPDIR)/tst-boost.Po -rm -f testsuite/$(DEPDIR)/tst-pcre.Po -rm -f testsuite/$(DEPDIR)/tst-regex2.Po -rm -f testsuite/$(DEPDIR)/tst-rxspencer.Po -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-local distclean-tags dvi: dvi-recursive dvi-am: $(DVIS) html: html-recursive html-am: $(HTMLS) info: info-recursive info-am: $(INFO_DEPS) install-data-am: install-info-am install-man install-dvi: install-dvi-recursive install-dvi-am: $(DVIS) @$(NORMAL_INSTALL) @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ done install-exec-am: install-binPROGRAMS install-exec-local install-html: install-html-recursive install-html-am: $(HTMLS) @$(NORMAL_INSTALL) @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ $(am__strip_dir) \ d2=$$d$$p; \ if test -d "$$d2"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ else \ list2="$$list2 $$d2"; \ fi; \ done; \ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ done; } install-info: install-info-recursive install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ fi; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then \ echo ./$$file; \ else \ echo $(srcdir)/$$file; \ fi; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done @$(POST_INSTALL) @if $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: install-man1 install-pdf: install-pdf-recursive install-pdf-am: $(PDFS) @$(NORMAL_INSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done install-ps: install-ps-recursive install-ps-am: $(PSS) @$(NORMAL_INSTALL) @list='$(PSS)'; test -n "$(psdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f lib/$(DEPDIR)/acl-errno-valid.Po -rm -f lib/$(DEPDIR)/acl-internal.Po -rm -f lib/$(DEPDIR)/acl_entries.Po -rm -f lib/$(DEPDIR)/alloca.Po -rm -f lib/$(DEPDIR)/basename-lgpl.Po -rm -f lib/$(DEPDIR)/btowc.Po -rm -f lib/$(DEPDIR)/c-ctype.Po -rm -f lib/$(DEPDIR)/c-strcasecmp.Po -rm -f lib/$(DEPDIR)/c-strncasecmp.Po -rm -f lib/$(DEPDIR)/canonicalize-lgpl.Po -rm -f lib/$(DEPDIR)/close-stream.Po -rm -f lib/$(DEPDIR)/closeout.Po -rm -f lib/$(DEPDIR)/copy-acl.Po -rm -f lib/$(DEPDIR)/dfa.Po -rm -f lib/$(DEPDIR)/dirname-lgpl.Po -rm -f lib/$(DEPDIR)/error.Po -rm -f lib/$(DEPDIR)/exitfail.Po -rm -f lib/$(DEPDIR)/fpending.Po -rm -f lib/$(DEPDIR)/fstat.Po -rm -f lib/$(DEPDIR)/fwriting.Po -rm -f lib/$(DEPDIR)/get-permissions.Po -rm -f lib/$(DEPDIR)/getdelim.Po -rm -f lib/$(DEPDIR)/getfilecon.Po -rm -f lib/$(DEPDIR)/getopt.Po -rm -f lib/$(DEPDIR)/getopt1.Po -rm -f lib/$(DEPDIR)/getprogname.Po -rm -f lib/$(DEPDIR)/gettimeofday.Po -rm -f lib/$(DEPDIR)/hard-locale.Po -rm -f lib/$(DEPDIR)/isblank.Po -rm -f lib/$(DEPDIR)/localcharset.Po -rm -f lib/$(DEPDIR)/localeconv.Po -rm -f lib/$(DEPDIR)/localeinfo.Po -rm -f lib/$(DEPDIR)/lstat.Po -rm -f lib/$(DEPDIR)/malloc.Po -rm -f lib/$(DEPDIR)/malloca.Po -rm -f lib/$(DEPDIR)/mbrlen.Po -rm -f lib/$(DEPDIR)/mbrtowc.Po -rm -f lib/$(DEPDIR)/mbsinit.Po -rm -f lib/$(DEPDIR)/mbtowc.Po -rm -f lib/$(DEPDIR)/memchr.Po -rm -f lib/$(DEPDIR)/memrchr.Po -rm -f lib/$(DEPDIR)/mkostemp.Po -rm -f lib/$(DEPDIR)/msvc-inval.Po -rm -f lib/$(DEPDIR)/msvc-nothrow.Po -rm -f lib/$(DEPDIR)/nl_langinfo.Po -rm -f lib/$(DEPDIR)/obstack.Po -rm -f lib/$(DEPDIR)/progname.Po -rm -f lib/$(DEPDIR)/qcopy-acl.Po -rm -f lib/$(DEPDIR)/qset-acl.Po -rm -f lib/$(DEPDIR)/quotearg.Po -rm -f lib/$(DEPDIR)/readlink.Po -rm -f lib/$(DEPDIR)/regcomp.Po -rm -f lib/$(DEPDIR)/regex.Po -rm -f lib/$(DEPDIR)/regex_internal.Po -rm -f lib/$(DEPDIR)/regexec.Po -rm -f lib/$(DEPDIR)/rename.Po -rm -f lib/$(DEPDIR)/rmdir.Po -rm -f lib/$(DEPDIR)/se-context.Po -rm -f lib/$(DEPDIR)/se-selinux.Po -rm -f lib/$(DEPDIR)/secure_getenv.Po -rm -f lib/$(DEPDIR)/set-acl.Po -rm -f lib/$(DEPDIR)/set-permissions.Po -rm -f lib/$(DEPDIR)/stat.Po -rm -f lib/$(DEPDIR)/strerror-override.Po -rm -f lib/$(DEPDIR)/strerror.Po -rm -f lib/$(DEPDIR)/stripslash.Po -rm -f lib/$(DEPDIR)/strverscmp.Po -rm -f lib/$(DEPDIR)/tempname.Po -rm -f lib/$(DEPDIR)/unistd.Po -rm -f lib/$(DEPDIR)/version-etc-fsf.Po -rm -f lib/$(DEPDIR)/version-etc.Po -rm -f lib/$(DEPDIR)/wcrtomb.Po -rm -f lib/$(DEPDIR)/wctob.Po -rm -f lib/$(DEPDIR)/wctomb.Po -rm -f lib/$(DEPDIR)/wctype-h.Po -rm -f lib/$(DEPDIR)/xalloc-die.Po -rm -f lib/$(DEPDIR)/xmalloc.Po -rm -f lib/glthread/$(DEPDIR)/lock.Po -rm -f lib/glthread/$(DEPDIR)/threadlib.Po -rm -f sed/$(DEPDIR)/sed_sed-compile.Po -rm -f sed/$(DEPDIR)/sed_sed-execute.Po -rm -f sed/$(DEPDIR)/sed_sed-mbcs.Po -rm -f sed/$(DEPDIR)/sed_sed-regexp.Po -rm -f sed/$(DEPDIR)/sed_sed-sed.Po -rm -f sed/$(DEPDIR)/sed_sed-utils.Po -rm -f sed/$(DEPDIR)/version.Po -rm -f testsuite/$(DEPDIR)/bug-regex10.Po -rm -f testsuite/$(DEPDIR)/bug-regex11.Po -rm -f testsuite/$(DEPDIR)/bug-regex12.Po -rm -f testsuite/$(DEPDIR)/bug-regex13.Po -rm -f testsuite/$(DEPDIR)/bug-regex14.Po -rm -f testsuite/$(DEPDIR)/bug-regex15.Po -rm -f testsuite/$(DEPDIR)/bug-regex16.Po -rm -f testsuite/$(DEPDIR)/bug-regex21.Po -rm -f testsuite/$(DEPDIR)/bug-regex27.Po -rm -f testsuite/$(DEPDIR)/bug-regex28.Po -rm -f testsuite/$(DEPDIR)/bug-regex7.Po -rm -f testsuite/$(DEPDIR)/bug-regex8.Po -rm -f testsuite/$(DEPDIR)/bug-regex9.Po -rm -f testsuite/$(DEPDIR)/get-mb-cur-max.Po -rm -f testsuite/$(DEPDIR)/runptests.Po -rm -f testsuite/$(DEPDIR)/runtests.Po -rm -f testsuite/$(DEPDIR)/test-mbrtowc.Po -rm -f testsuite/$(DEPDIR)/tst-boost.Po -rm -f testsuite/$(DEPDIR)/tst-pcre.Po -rm -f testsuite/$(DEPDIR)/tst-regex2.Po -rm -f testsuite/$(DEPDIR)/tst-rxspencer.Po -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic maintainer-clean-vti mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ mostlyclean-generic mostlyclean-local mostlyclean-vti pdf: pdf-recursive pdf-am: $(PDFS) ps: ps-recursive ps-am: $(PSS) uninstall-am: uninstall-binPROGRAMS uninstall-dvi-am uninstall-html-am \ uninstall-info-am uninstall-local uninstall-man \ uninstall-pdf-am uninstall-ps-am uninstall-man: uninstall-man1 .MAKE: $(am__recursive_targets) all check check-am install install-am \ install-strip .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ am--depfiles am--refresh check check-TESTS check-am clean \ clean-aminfo clean-binPROGRAMS clean-checkPROGRAMS \ clean-cscope clean-generic clean-noinstLIBRARIES cscope \ cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ dist-gzip dist-hook dist-info dist-lzip dist-xz dist-zip \ distcheck distclean distclean-compile distclean-generic \ distclean-hdr distclean-local distclean-tags distcleancheck \ distdir distuninstallcheck dvi dvi-am html html-am info \ info-am install install-am install-binPROGRAMS install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-exec-local install-html \ install-html-am install-info install-info-am install-man \ install-man1 install-pdf install-pdf-am install-ps \ install-ps-am install-strip installcheck installcheck-am \ installdirs installdirs-am maintainer-clean \ maintainer-clean-aminfo maintainer-clean-generic \ maintainer-clean-vti mostlyclean mostlyclean-aminfo \ mostlyclean-compile mostlyclean-generic mostlyclean-local \ mostlyclean-vti pdf pdf-am ps ps-am recheck tags tags-am \ uninstall uninstall-am uninstall-binPROGRAMS uninstall-dvi-am \ uninstall-html-am uninstall-info-am uninstall-local \ uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am .PRECIOUS: Makefile .version: $(AM_V_GEN)echo $(VERSION) > $@-t && mv $@-t $@ # Arrange so that .tarball-version appears only in the distribution # tarball, and never in a checked-out repository. dist-hook: gen-ChangeLog $(AM_V_GEN)echo $(VERSION) > $(distdir)/.tarball-version .PHONY: gen-ChangeLog gen-ChangeLog: $(AM_V_GEN)if test -d .git; then \ log_fix="$(srcdir)/build-aux/git-log-fix"; \ test -e "$$log_fix" \ && amend_git_log="--amend=$$log_fix" \ || amend_git_log=; \ $(top_srcdir)/build-aux/gitlog-to-changelog \ $$amend_git_log --since=$(gen_start_date) > $(distdir)/cl-t && \ { rm -f $(distdir)/ChangeLog && \ mv $(distdir)/cl-t $(distdir)/ChangeLog; } \ fi THANKS: THANKS.in Makefile.am .mailmap thanks-gen .version $(AM_V_GEN)rm -f $@-t $@; \ { \ $(prologue); echo; \ { perl -ne '/^$$/.../^$$/ and print' $(srcdir)/THANKS.in \ | grep -v '^$$' | perl -pe 's/ +/\0/'; \ git log --pretty=format:'%aN%x00%aE' \ | $(ASSORT) -u; \ } | $(srcdir)/thanks-gen \ | LC_ALL=en_US.UTF-8 sort -f; \ echo; \ printf ';; %s\n' 'Local Variables:' 'coding: utf-8' End:; \ } > $@-t && chmod a-w $@-t && mv $@-t $@ full-distcheck: $(MAKE) distcheck EXTRA_DC_FLAGS='--enable-regex-tests' $(MAKE) distcheck EXTRA_DC_FLAGS='--enable-html' $(MAKE) distcheck EXTRA_DC_FLAGS='--disable-i18n' $(MAKE) distcheck EXTRA_DC_FLAGS='--disable-nls' $(MAKE) distcheck EXTRA_DC_FLAGS='--without-included-gettext' @case "$(host)" in \ *-linux*|*-gnu*) \ echo $(MAKE) distcheck \ EXTRA_DC_FLAGS=\'--without-included-regex\'; \ $(MAKE) distcheck EXTRA_DC_FLAGS='--without-included-regex' \ ;; \ *) \ echo Skipping check --without-included-regex \ ;; \ esac # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/alloca.h: lib/alloca.in.h $(top_builddir)/config.status $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ cat $(top_srcdir)/lib/alloca.in.h; \ } > $@-t && \ mv -f $@-t $@ #lib/alloca.h: $(top_builddir)/config.status # rm -f $@ # Listed in the same order as the GNU makefile conventions, and # provided by autoconf 2.59c+ or 2.70. # The Automake-defined pkg* macros are appended, in the order # listed in the Automake 1.10a+ documentation. lib/configmake.h: Makefile $(AM_V_GEN)rm -f $@-t && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ echo '#define PREFIX "$(prefix)"'; \ echo '#define EXEC_PREFIX "$(exec_prefix)"'; \ echo '#define BINDIR "$(bindir)"'; \ echo '#define SBINDIR "$(sbindir)"'; \ echo '#define LIBEXECDIR "$(libexecdir)"'; \ echo '#define DATAROOTDIR "$(datarootdir)"'; \ echo '#define DATADIR "$(datadir)"'; \ echo '#define SYSCONFDIR "$(sysconfdir)"'; \ echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \ echo '#define LOCALSTATEDIR "$(localstatedir)"'; \ echo '#define RUNSTATEDIR "$(runstatedir)"'; \ echo '#define INCLUDEDIR "$(includedir)"'; \ echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \ echo '#define DOCDIR "$(docdir)"'; \ echo '#define INFODIR "$(infodir)"'; \ echo '#define HTMLDIR "$(htmldir)"'; \ echo '#define DVIDIR "$(dvidir)"'; \ echo '#define PDFDIR "$(pdfdir)"'; \ echo '#define PSDIR "$(psdir)"'; \ echo '#define LIBDIR "$(libdir)"'; \ echo '#define LISPDIR "$(lispdir)"'; \ echo '#define LOCALEDIR "$(localedir)"'; \ echo '#define MANDIR "$(mandir)"'; \ echo '#define MANEXT "$(manext)"'; \ echo '#define PKGDATADIR "$(pkgdatadir)"'; \ echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \ echo '#define PKGLIBDIR "$(pkglibdir)"'; \ echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \ } | sed '/""/d' > $@-t && \ mv -f $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/ctype.h: lib/ctype.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_CTYPE_H''@|$(NEXT_CTYPE_H)|g' \ -e 's/@''GNULIB_ISBLANK''@/$(GNULIB_ISBLANK)/g' \ -e 's/@''HAVE_ISBLANK''@/$(HAVE_ISBLANK)/g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/ctype.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that is POSIX compliant. #lib/errno.h: lib/errno.in.h $(top_builddir)/config.status # $(AM_V_GEN)rm -f $@-t $@ && \ # { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ # sed -e 's|@''GUARD_PREFIX''@|GL|g' \ # -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ # -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ # -e 's|@''PRAGMA_COLUMNS''@||g' \ # -e 's|@''NEXT_ERRNO_H''@|$(NEXT_ERRNO_H)|g' \ # -e 's|@''EMULTIHOP_HIDDEN''@|$(EMULTIHOP_HIDDEN)|g' \ # -e 's|@''EMULTIHOP_VALUE''@|$(EMULTIHOP_VALUE)|g' \ # -e 's|@''ENOLINK_HIDDEN''@|$(ENOLINK_HIDDEN)|g' \ # -e 's|@''ENOLINK_VALUE''@|$(ENOLINK_VALUE)|g' \ # -e 's|@''EOVERFLOW_HIDDEN''@|$(EOVERFLOW_HIDDEN)|g' \ # -e 's|@''EOVERFLOW_VALUE''@|$(EOVERFLOW_VALUE)|g' \ # < $(top_srcdir)/lib/errno.in.h; \ # } > $@-t && \ # mv $@-t $@ lib/errno.h: $(top_builddir)/config.status rm -f $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/fcntl.h: lib/fcntl.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_FCNTL_H''@|$(NEXT_FCNTL_H)|g' \ -e 's/@''GNULIB_FCNTL''@/$(GNULIB_FCNTL)/g' \ -e 's/@''GNULIB_NONBLOCKING''@/$(GNULIB_NONBLOCKING)/g' \ -e 's/@''GNULIB_OPEN''@/$(GNULIB_OPEN)/g' \ -e 's/@''GNULIB_OPENAT''@/$(GNULIB_OPENAT)/g' \ -e 's|@''HAVE_FCNTL''@|$(HAVE_FCNTL)|g' \ -e 's|@''HAVE_OPENAT''@|$(HAVE_OPENAT)|g' \ -e 's|@''REPLACE_FCNTL''@|$(REPLACE_FCNTL)|g' \ -e 's|@''REPLACE_OPEN''@|$(REPLACE_OPEN)|g' \ -e 's|@''REPLACE_OPENAT''@|$(REPLACE_OPENAT)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/fcntl.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/getopt.h: lib/getopt.in.h $(top_builddir)/config.status $(ARG_NONNULL_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''HAVE_GETOPT_H''@|$(HAVE_GETOPT_H)|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_GETOPT_H''@|$(NEXT_GETOPT_H)|g' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ < $(top_srcdir)/lib/getopt.in.h; \ } > $@-t && \ mv -f $@-t $@ distclean-local: clean-GNUmakefile clean-GNUmakefile: test '$(srcdir)' = . || rm -f $(top_builddir)/GNUmakefile # We need the following in order to create an empty placeholder for # when the system doesn't have one. lib/langinfo.h: lib/langinfo.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''HAVE_LANGINFO_H''@|$(HAVE_LANGINFO_H)|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_LANGINFO_H''@|$(NEXT_LANGINFO_H)|g' \ -e 's/@''GNULIB_NL_LANGINFO''@/$(GNULIB_NL_LANGINFO)/g' \ -e 's|@''HAVE_LANGINFO_CODESET''@|$(HAVE_LANGINFO_CODESET)|g' \ -e 's|@''HAVE_LANGINFO_T_FMT_AMPM''@|$(HAVE_LANGINFO_T_FMT_AMPM)|g' \ -e 's|@''HAVE_LANGINFO_ERA''@|$(HAVE_LANGINFO_ERA)|g' \ -e 's|@''HAVE_LANGINFO_YESEXPR''@|$(HAVE_LANGINFO_YESEXPR)|g' \ -e 's|@''HAVE_NL_LANGINFO''@|$(HAVE_NL_LANGINFO)|g' \ -e 's|@''REPLACE_NL_LANGINFO''@|$(REPLACE_NL_LANGINFO)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/langinfo.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that is compatible with GNU. lib/limits.h: lib/limits.in.h $(top_builddir)/config.status $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_LIMITS_H''@|$(NEXT_LIMITS_H)|g' \ < $(top_srcdir)/lib/limits.in.h; \ } > $@-t && \ mv $@-t $@ #lib/limits.h: $(top_builddir)/config.status # rm -f $@ # We need the following in order to install a simple file in $(libdir) # which is shared with other installed packages. We use a list of referencing # packages so that "make uninstall" will remove the file if and only if it # is not used by another installed package. # On systems with glibc-2.1 or newer, the file is redundant, therefore we # avoid installing it. all-local: lib/charset.alias lib/ref-add.sed lib/ref-del.sed install-exec-local: install-exec-localcharset install-exec-localcharset: all-local if test $(GLIBC21) = no; then \ case '$(host_os)' in \ darwin[56]*) \ need_charset_alias=true ;; \ darwin* | cygwin* | mingw* | pw32* | cegcc*) \ need_charset_alias=false ;; \ *) \ need_charset_alias=true ;; \ esac ; \ else \ need_charset_alias=false ; \ fi ; \ if $$need_charset_alias; then \ $(mkinstalldirs) $(DESTDIR)$(libdir) ; \ fi ; \ if test -f $(charset_alias); then \ sed -f lib/ref-add.sed $(charset_alias) > $(charset_tmp) ; \ $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \ rm -f $(charset_tmp) ; \ else \ if $$need_charset_alias; then \ sed -f lib/ref-add.sed lib/charset.alias > $(charset_tmp) ; \ $(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \ rm -f $(charset_tmp) ; \ fi ; \ fi uninstall-local: uninstall-localcharset uninstall-localcharset: all-local if test -f $(charset_alias); then \ sed -f lib/ref-del.sed $(charset_alias) > $(charset_tmp); \ if grep '^# Packages using this file: $$' $(charset_tmp) \ > /dev/null; then \ rm -f $(charset_alias); \ else \ $(INSTALL_DATA) $(charset_tmp) $(charset_alias); \ fi; \ rm -f $(charset_tmp); \ fi lib/charset.alias: lib/config.charset $(AM_V_GEN)rm -f $@-t $@ && \ $(SHELL) $(top_srcdir)/lib/config.charset '$(host)' > $@-t && \ mv $@-t $@ # SUFFIXES += .sed .sin .sin.sed: $(AM_V_GEN)rm -f $@-t $@ && \ sed -e '/^#/d' -e 's/@''PACKAGE''@/$(PACKAGE)/g' $< > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that provides all definitions. lib/locale.h: lib/locale.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_LOCALE_H''@|$(NEXT_LOCALE_H)|g' \ -e 's/@''GNULIB_LOCALECONV''@/$(GNULIB_LOCALECONV)/g' \ -e 's/@''GNULIB_SETLOCALE''@/$(GNULIB_SETLOCALE)/g' \ -e 's/@''GNULIB_DUPLOCALE''@/$(GNULIB_DUPLOCALE)/g' \ -e 's|@''HAVE_DUPLOCALE''@|$(HAVE_DUPLOCALE)|g' \ -e 's|@''HAVE_XLOCALE_H''@|$(HAVE_XLOCALE_H)|g' \ -e 's|@''REPLACE_LOCALECONV''@|$(REPLACE_LOCALECONV)|g' \ -e 's|@''REPLACE_SETLOCALE''@|$(REPLACE_SETLOCALE)|g' \ -e 's|@''REPLACE_DUPLOCALE''@|$(REPLACE_DUPLOCALE)|g' \ -e 's|@''REPLACE_STRUCT_LCONV''@|$(REPLACE_STRUCT_LCONV)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/locale.in.h; \ } > $@-t && \ mv $@-t $@ lib/selinux/selinux.h: lib/se-selinux.in.h $(top_builddir)/config.status $(UNUSED_PARAMETER_H) $(AM_V_at)$(MKDIR_P) lib/selinux $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_SELINUX_SELINUX_H''@|$(NEXT_SELINUX_SELINUX_H)|g' \ -e '/definition of _GL_UNUSED_PARAMETER/r $(UNUSED_PARAMETER_H)' \ < $(top_srcdir)/lib/se-selinux.in.h; \ } > $@-t && \ chmod a-x $@-t && \ mv $@-t $@ lib/selinux/context.h: lib/se-context.in.h $(top_builddir)/config.status $(UNUSED_PARAMETER_H) $(AM_V_at)$(MKDIR_P) lib/selinux $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e '/definition of _GL_UNUSED_PARAMETER/r $(UNUSED_PARAMETER_H)' \ < $(top_srcdir)/lib/se-context.in.h; \ } > $@-t && \ chmod a-x $@-t && \ mv $@-t $@ #lib/selinux/context.h: $(top_builddir)/config.status # rm -f $@ # The arg-nonnull.h that gets inserted into generated .h files is the same as # build-aux/snippet/arg-nonnull.h, except that it has the copyright header cut # off. lib/arg-nonnull.h: $(top_srcdir)/build-aux/snippet/arg-nonnull.h $(AM_V_GEN)rm -f $@-t $@ && \ sed -n -e '/GL_ARG_NONNULL/,$$p' \ < $(top_srcdir)/build-aux/snippet/arg-nonnull.h \ > $@-t && \ mv $@-t $@ # The c++defs.h that gets inserted into generated .h files is the same as # build-aux/snippet/c++defs.h, except that it has the copyright header cut off. lib/c++defs.h: $(top_srcdir)/build-aux/snippet/c++defs.h $(AM_V_GEN)rm -f $@-t $@ && \ sed -n -e '/_GL_CXXDEFS/,$$p' \ < $(top_srcdir)/build-aux/snippet/c++defs.h \ > $@-t && \ mv $@-t $@ # The unused-parameter.h that gets inserted into generated .h files is the same # as build-aux/snippet/unused-parameter.h, except that it has the copyright # header cut off. lib/unused-parameter.h: $(top_srcdir)/build-aux/snippet/unused-parameter.h $(AM_V_GEN)rm -f $@-t $@ && \ sed -n -e '/GL_UNUSED_PARAMETER/,$$p' \ < $(top_srcdir)/build-aux/snippet/unused-parameter.h \ > $@-t && \ mv $@-t $@ # The warn-on-use.h that gets inserted into generated .h files is the same as # build-aux/snippet/warn-on-use.h, except that it has the copyright header cut # off. lib/warn-on-use.h: $(top_srcdir)/build-aux/snippet/warn-on-use.h $(AM_V_GEN)rm -f $@-t $@ && \ sed -n -e '/^.ifndef/,$$p' \ < $(top_srcdir)/build-aux/snippet/warn-on-use.h \ > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works. #lib/stdalign.h: lib/stdalign.in.h $(top_builddir)/config.status # $(AM_V_GEN)rm -f $@-t $@ && \ # { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ # cat $(top_srcdir)/lib/stdalign.in.h; \ # } > $@-t && \ # mv $@-t $@ lib/stdalign.h: $(top_builddir)/config.status rm -f $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. #lib/stdarg.h: lib/stdarg.in.h $(top_builddir)/config.status # $(AM_V_GEN)rm -f $@-t $@ && \ # { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ # sed -e 's|@''GUARD_PREFIX''@|GL|g' \ # -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ # -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ # -e 's|@''PRAGMA_COLUMNS''@||g' \ # -e 's|@''NEXT_STDARG_H''@|$(NEXT_STDARG_H)|g' \ # < $(top_srcdir)/lib/stdarg.in.h; \ # } > $@-t && \ # mv $@-t $@ lib/stdarg.h: $(top_builddir)/config.status rm -f $@ # We need the following in order to create when the system # doesn't have one that works. #lib/stdbool.h: lib/stdbool.in.h $(top_builddir)/config.status # $(AM_V_GEN)rm -f $@-t $@ && \ # { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ # sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(top_srcdir)/lib/stdbool.in.h; \ # } > $@-t && \ # mv $@-t $@ lib/stdbool.h: $(top_builddir)/config.status rm -f $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. #lib/stddef.h: lib/stddef.in.h $(top_builddir)/config.status # $(AM_V_GEN)rm -f $@-t $@ && \ # { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ # sed -e 's|@''GUARD_PREFIX''@|GL|g' \ # -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ # -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ # -e 's|@''PRAGMA_COLUMNS''@||g' \ # -e 's|@''NEXT_STDDEF_H''@|$(NEXT_STDDEF_H)|g' \ # -e 's|@''HAVE_MAX_ALIGN_T''@|$(HAVE_MAX_ALIGN_T)|g' \ # -e 's|@''HAVE_WCHAR_T''@|$(HAVE_WCHAR_T)|g' \ # -e 's|@''REPLACE_NULL''@|$(REPLACE_NULL)|g' \ # < $(top_srcdir)/lib/stddef.in.h; \ # } > $@-t && \ # mv $@-t $@ lib/stddef.h: $(top_builddir)/config.status rm -f $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. #lib/stdint.h: lib/stdint.in.h $(top_builddir)/config.status # $(AM_V_GEN)rm -f $@-t $@ && \ # { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ # sed -e 's|@''GUARD_PREFIX''@|GL|g' \ # -e 's/@''HAVE_STDINT_H''@/$(HAVE_STDINT_H)/g' \ # -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ # -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ # -e 's|@''PRAGMA_COLUMNS''@||g' \ # -e 's|@''NEXT_STDINT_H''@|$(NEXT_STDINT_H)|g' \ # -e 's/@''HAVE_C99_STDINT_H''@/$(HAVE_C99_STDINT_H)/g' \ # -e 's/@''HAVE_SYS_TYPES_H''@/$(HAVE_SYS_TYPES_H)/g' \ # -e 's/@''HAVE_INTTYPES_H''@/$(HAVE_INTTYPES_H)/g' \ # -e 's/@''HAVE_SYS_INTTYPES_H''@/$(HAVE_SYS_INTTYPES_H)/g' \ # -e 's/@''HAVE_SYS_BITYPES_H''@/$(HAVE_SYS_BITYPES_H)/g' \ # -e 's/@''HAVE_WCHAR_H''@/$(HAVE_WCHAR_H)/g' \ # -e 's/@''HAVE_LONG_LONG_INT''@/$(HAVE_LONG_LONG_INT)/g' \ # -e 's/@''HAVE_UNSIGNED_LONG_LONG_INT''@/$(HAVE_UNSIGNED_LONG_LONG_INT)/g' \ # -e 's/@''APPLE_UNIVERSAL_BUILD''@/$(APPLE_UNIVERSAL_BUILD)/g' \ # -e 's/@''BITSIZEOF_PTRDIFF_T''@/$(BITSIZEOF_PTRDIFF_T)/g' \ # -e 's/@''PTRDIFF_T_SUFFIX''@/$(PTRDIFF_T_SUFFIX)/g' \ # -e 's/@''BITSIZEOF_SIG_ATOMIC_T''@/$(BITSIZEOF_SIG_ATOMIC_T)/g' \ # -e 's/@''HAVE_SIGNED_SIG_ATOMIC_T''@/$(HAVE_SIGNED_SIG_ATOMIC_T)/g' \ # -e 's/@''SIG_ATOMIC_T_SUFFIX''@/$(SIG_ATOMIC_T_SUFFIX)/g' \ # -e 's/@''BITSIZEOF_SIZE_T''@/$(BITSIZEOF_SIZE_T)/g' \ # -e 's/@''SIZE_T_SUFFIX''@/$(SIZE_T_SUFFIX)/g' \ # -e 's/@''BITSIZEOF_WCHAR_T''@/$(BITSIZEOF_WCHAR_T)/g' \ # -e 's/@''HAVE_SIGNED_WCHAR_T''@/$(HAVE_SIGNED_WCHAR_T)/g' \ # -e 's/@''WCHAR_T_SUFFIX''@/$(WCHAR_T_SUFFIX)/g' \ # -e 's/@''BITSIZEOF_WINT_T''@/$(BITSIZEOF_WINT_T)/g' \ # -e 's/@''HAVE_SIGNED_WINT_T''@/$(HAVE_SIGNED_WINT_T)/g' \ # -e 's/@''WINT_T_SUFFIX''@/$(WINT_T_SUFFIX)/g' \ # -e 's/@''GNULIB_OVERRIDES_WINT_T''@/$(GNULIB_OVERRIDES_WINT_T)/g' \ # < $(top_srcdir)/lib/stdint.in.h; \ # } > $@-t && \ # mv $@-t $@ lib/stdint.h: $(top_builddir)/config.status rm -f $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/stdio.h: lib/stdio.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_STDIO_H''@|$(NEXT_STDIO_H)|g' \ -e 's/@''GNULIB_DPRINTF''@/$(GNULIB_DPRINTF)/g' \ -e 's/@''GNULIB_FCLOSE''@/$(GNULIB_FCLOSE)/g' \ -e 's/@''GNULIB_FDOPEN''@/$(GNULIB_FDOPEN)/g' \ -e 's/@''GNULIB_FFLUSH''@/$(GNULIB_FFLUSH)/g' \ -e 's/@''GNULIB_FGETC''@/$(GNULIB_FGETC)/g' \ -e 's/@''GNULIB_FGETS''@/$(GNULIB_FGETS)/g' \ -e 's/@''GNULIB_FOPEN''@/$(GNULIB_FOPEN)/g' \ -e 's/@''GNULIB_FPRINTF''@/$(GNULIB_FPRINTF)/g' \ -e 's/@''GNULIB_FPRINTF_POSIX''@/$(GNULIB_FPRINTF_POSIX)/g' \ -e 's/@''GNULIB_FPURGE''@/$(GNULIB_FPURGE)/g' \ -e 's/@''GNULIB_FPUTC''@/$(GNULIB_FPUTC)/g' \ -e 's/@''GNULIB_FPUTS''@/$(GNULIB_FPUTS)/g' \ -e 's/@''GNULIB_FREAD''@/$(GNULIB_FREAD)/g' \ -e 's/@''GNULIB_FREOPEN''@/$(GNULIB_FREOPEN)/g' \ -e 's/@''GNULIB_FSCANF''@/$(GNULIB_FSCANF)/g' \ -e 's/@''GNULIB_FSEEK''@/$(GNULIB_FSEEK)/g' \ -e 's/@''GNULIB_FSEEKO''@/$(GNULIB_FSEEKO)/g' \ -e 's/@''GNULIB_FTELL''@/$(GNULIB_FTELL)/g' \ -e 's/@''GNULIB_FTELLO''@/$(GNULIB_FTELLO)/g' \ -e 's/@''GNULIB_FWRITE''@/$(GNULIB_FWRITE)/g' \ -e 's/@''GNULIB_GETC''@/$(GNULIB_GETC)/g' \ -e 's/@''GNULIB_GETCHAR''@/$(GNULIB_GETCHAR)/g' \ -e 's/@''GNULIB_GETDELIM''@/$(GNULIB_GETDELIM)/g' \ -e 's/@''GNULIB_GETLINE''@/$(GNULIB_GETLINE)/g' \ -e 's/@''GNULIB_OBSTACK_PRINTF''@/$(GNULIB_OBSTACK_PRINTF)/g' \ -e 's/@''GNULIB_OBSTACK_PRINTF_POSIX''@/$(GNULIB_OBSTACK_PRINTF_POSIX)/g' \ -e 's/@''GNULIB_PCLOSE''@/$(GNULIB_PCLOSE)/g' \ -e 's/@''GNULIB_PERROR''@/$(GNULIB_PERROR)/g' \ -e 's/@''GNULIB_POPEN''@/$(GNULIB_POPEN)/g' \ -e 's/@''GNULIB_PRINTF''@/$(GNULIB_PRINTF)/g' \ -e 's/@''GNULIB_PRINTF_POSIX''@/$(GNULIB_PRINTF_POSIX)/g' \ -e 's/@''GNULIB_PUTC''@/$(GNULIB_PUTC)/g' \ -e 's/@''GNULIB_PUTCHAR''@/$(GNULIB_PUTCHAR)/g' \ -e 's/@''GNULIB_PUTS''@/$(GNULIB_PUTS)/g' \ -e 's/@''GNULIB_REMOVE''@/$(GNULIB_REMOVE)/g' \ -e 's/@''GNULIB_RENAME''@/$(GNULIB_RENAME)/g' \ -e 's/@''GNULIB_RENAMEAT''@/$(GNULIB_RENAMEAT)/g' \ -e 's/@''GNULIB_SCANF''@/$(GNULIB_SCANF)/g' \ -e 's/@''GNULIB_SNPRINTF''@/$(GNULIB_SNPRINTF)/g' \ -e 's/@''GNULIB_SPRINTF_POSIX''@/$(GNULIB_SPRINTF_POSIX)/g' \ -e 's/@''GNULIB_STDIO_H_NONBLOCKING''@/$(GNULIB_STDIO_H_NONBLOCKING)/g' \ -e 's/@''GNULIB_STDIO_H_SIGPIPE''@/$(GNULIB_STDIO_H_SIGPIPE)/g' \ -e 's/@''GNULIB_TMPFILE''@/$(GNULIB_TMPFILE)/g' \ -e 's/@''GNULIB_VASPRINTF''@/$(GNULIB_VASPRINTF)/g' \ -e 's/@''GNULIB_VDPRINTF''@/$(GNULIB_VDPRINTF)/g' \ -e 's/@''GNULIB_VFPRINTF''@/$(GNULIB_VFPRINTF)/g' \ -e 's/@''GNULIB_VFPRINTF_POSIX''@/$(GNULIB_VFPRINTF_POSIX)/g' \ -e 's/@''GNULIB_VFSCANF''@/$(GNULIB_VFSCANF)/g' \ -e 's/@''GNULIB_VSCANF''@/$(GNULIB_VSCANF)/g' \ -e 's/@''GNULIB_VPRINTF''@/$(GNULIB_VPRINTF)/g' \ -e 's/@''GNULIB_VPRINTF_POSIX''@/$(GNULIB_VPRINTF_POSIX)/g' \ -e 's/@''GNULIB_VSNPRINTF''@/$(GNULIB_VSNPRINTF)/g' \ -e 's/@''GNULIB_VSPRINTF_POSIX''@/$(GNULIB_VSPRINTF_POSIX)/g' \ < $(top_srcdir)/lib/stdio.in.h | \ sed -e 's|@''HAVE_DECL_FPURGE''@|$(HAVE_DECL_FPURGE)|g' \ -e 's|@''HAVE_DECL_FSEEKO''@|$(HAVE_DECL_FSEEKO)|g' \ -e 's|@''HAVE_DECL_FTELLO''@|$(HAVE_DECL_FTELLO)|g' \ -e 's|@''HAVE_DECL_GETDELIM''@|$(HAVE_DECL_GETDELIM)|g' \ -e 's|@''HAVE_DECL_GETLINE''@|$(HAVE_DECL_GETLINE)|g' \ -e 's|@''HAVE_DECL_OBSTACK_PRINTF''@|$(HAVE_DECL_OBSTACK_PRINTF)|g' \ -e 's|@''HAVE_DECL_SNPRINTF''@|$(HAVE_DECL_SNPRINTF)|g' \ -e 's|@''HAVE_DECL_VSNPRINTF''@|$(HAVE_DECL_VSNPRINTF)|g' \ -e 's|@''HAVE_DPRINTF''@|$(HAVE_DPRINTF)|g' \ -e 's|@''HAVE_FSEEKO''@|$(HAVE_FSEEKO)|g' \ -e 's|@''HAVE_FTELLO''@|$(HAVE_FTELLO)|g' \ -e 's|@''HAVE_PCLOSE''@|$(HAVE_PCLOSE)|g' \ -e 's|@''HAVE_POPEN''@|$(HAVE_POPEN)|g' \ -e 's|@''HAVE_RENAMEAT''@|$(HAVE_RENAMEAT)|g' \ -e 's|@''HAVE_VASPRINTF''@|$(HAVE_VASPRINTF)|g' \ -e 's|@''HAVE_VDPRINTF''@|$(HAVE_VDPRINTF)|g' \ -e 's|@''REPLACE_DPRINTF''@|$(REPLACE_DPRINTF)|g' \ -e 's|@''REPLACE_FCLOSE''@|$(REPLACE_FCLOSE)|g' \ -e 's|@''REPLACE_FDOPEN''@|$(REPLACE_FDOPEN)|g' \ -e 's|@''REPLACE_FFLUSH''@|$(REPLACE_FFLUSH)|g' \ -e 's|@''REPLACE_FOPEN''@|$(REPLACE_FOPEN)|g' \ -e 's|@''REPLACE_FPRINTF''@|$(REPLACE_FPRINTF)|g' \ -e 's|@''REPLACE_FPURGE''@|$(REPLACE_FPURGE)|g' \ -e 's|@''REPLACE_FREOPEN''@|$(REPLACE_FREOPEN)|g' \ -e 's|@''REPLACE_FSEEK''@|$(REPLACE_FSEEK)|g' \ -e 's|@''REPLACE_FSEEKO''@|$(REPLACE_FSEEKO)|g' \ -e 's|@''REPLACE_FTELL''@|$(REPLACE_FTELL)|g' \ -e 's|@''REPLACE_FTELLO''@|$(REPLACE_FTELLO)|g' \ -e 's|@''REPLACE_GETDELIM''@|$(REPLACE_GETDELIM)|g' \ -e 's|@''REPLACE_GETLINE''@|$(REPLACE_GETLINE)|g' \ -e 's|@''REPLACE_OBSTACK_PRINTF''@|$(REPLACE_OBSTACK_PRINTF)|g' \ -e 's|@''REPLACE_PERROR''@|$(REPLACE_PERROR)|g' \ -e 's|@''REPLACE_POPEN''@|$(REPLACE_POPEN)|g' \ -e 's|@''REPLACE_PRINTF''@|$(REPLACE_PRINTF)|g' \ -e 's|@''REPLACE_REMOVE''@|$(REPLACE_REMOVE)|g' \ -e 's|@''REPLACE_RENAME''@|$(REPLACE_RENAME)|g' \ -e 's|@''REPLACE_RENAMEAT''@|$(REPLACE_RENAMEAT)|g' \ -e 's|@''REPLACE_SNPRINTF''@|$(REPLACE_SNPRINTF)|g' \ -e 's|@''REPLACE_SPRINTF''@|$(REPLACE_SPRINTF)|g' \ -e 's|@''REPLACE_STDIO_READ_FUNCS''@|$(REPLACE_STDIO_READ_FUNCS)|g' \ -e 's|@''REPLACE_STDIO_WRITE_FUNCS''@|$(REPLACE_STDIO_WRITE_FUNCS)|g' \ -e 's|@''REPLACE_TMPFILE''@|$(REPLACE_TMPFILE)|g' \ -e 's|@''REPLACE_VASPRINTF''@|$(REPLACE_VASPRINTF)|g' \ -e 's|@''REPLACE_VDPRINTF''@|$(REPLACE_VDPRINTF)|g' \ -e 's|@''REPLACE_VFPRINTF''@|$(REPLACE_VFPRINTF)|g' \ -e 's|@''REPLACE_VPRINTF''@|$(REPLACE_VPRINTF)|g' \ -e 's|@''REPLACE_VSNPRINTF''@|$(REPLACE_VSNPRINTF)|g' \ -e 's|@''REPLACE_VSPRINTF''@|$(REPLACE_VSPRINTF)|g' \ -e 's|@''ASM_SYMBOL_PREFIX''@|$(ASM_SYMBOL_PREFIX)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/stdlib.h: lib/stdlib.in.h $(top_builddir)/config.status $(CXXDEFS_H) \ $(_NORETURN_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_STDLIB_H''@|$(NEXT_STDLIB_H)|g' \ -e 's/@''GNULIB__EXIT''@/$(GNULIB__EXIT)/g' \ -e 's/@''GNULIB_ATOLL''@/$(GNULIB_ATOLL)/g' \ -e 's/@''GNULIB_CALLOC_POSIX''@/$(GNULIB_CALLOC_POSIX)/g' \ -e 's/@''GNULIB_CANONICALIZE_FILE_NAME''@/$(GNULIB_CANONICALIZE_FILE_NAME)/g' \ -e 's/@''GNULIB_GETLOADAVG''@/$(GNULIB_GETLOADAVG)/g' \ -e 's/@''GNULIB_GETSUBOPT''@/$(GNULIB_GETSUBOPT)/g' \ -e 's/@''GNULIB_GRANTPT''@/$(GNULIB_GRANTPT)/g' \ -e 's/@''GNULIB_MALLOC_POSIX''@/$(GNULIB_MALLOC_POSIX)/g' \ -e 's/@''GNULIB_MBTOWC''@/$(GNULIB_MBTOWC)/g' \ -e 's/@''GNULIB_MKDTEMP''@/$(GNULIB_MKDTEMP)/g' \ -e 's/@''GNULIB_MKOSTEMP''@/$(GNULIB_MKOSTEMP)/g' \ -e 's/@''GNULIB_MKOSTEMPS''@/$(GNULIB_MKOSTEMPS)/g' \ -e 's/@''GNULIB_MKSTEMP''@/$(GNULIB_MKSTEMP)/g' \ -e 's/@''GNULIB_MKSTEMPS''@/$(GNULIB_MKSTEMPS)/g' \ -e 's/@''GNULIB_POSIX_OPENPT''@/$(GNULIB_POSIX_OPENPT)/g' \ -e 's/@''GNULIB_PTSNAME''@/$(GNULIB_PTSNAME)/g' \ -e 's/@''GNULIB_PTSNAME_R''@/$(GNULIB_PTSNAME_R)/g' \ -e 's/@''GNULIB_PUTENV''@/$(GNULIB_PUTENV)/g' \ -e 's/@''GNULIB_QSORT_R''@/$(GNULIB_QSORT_R)/g' \ -e 's/@''GNULIB_RANDOM''@/$(GNULIB_RANDOM)/g' \ -e 's/@''GNULIB_RANDOM_R''@/$(GNULIB_RANDOM_R)/g' \ -e 's/@''GNULIB_REALLOC_POSIX''@/$(GNULIB_REALLOC_POSIX)/g' \ -e 's/@''GNULIB_REALPATH''@/$(GNULIB_REALPATH)/g' \ -e 's/@''GNULIB_RPMATCH''@/$(GNULIB_RPMATCH)/g' \ -e 's/@''GNULIB_SECURE_GETENV''@/$(GNULIB_SECURE_GETENV)/g' \ -e 's/@''GNULIB_SETENV''@/$(GNULIB_SETENV)/g' \ -e 's/@''GNULIB_STRTOD''@/$(GNULIB_STRTOD)/g' \ -e 's/@''GNULIB_STRTOLL''@/$(GNULIB_STRTOLL)/g' \ -e 's/@''GNULIB_STRTOULL''@/$(GNULIB_STRTOULL)/g' \ -e 's/@''GNULIB_SYSTEM_POSIX''@/$(GNULIB_SYSTEM_POSIX)/g' \ -e 's/@''GNULIB_UNLOCKPT''@/$(GNULIB_UNLOCKPT)/g' \ -e 's/@''GNULIB_UNSETENV''@/$(GNULIB_UNSETENV)/g' \ -e 's/@''GNULIB_WCTOMB''@/$(GNULIB_WCTOMB)/g' \ < $(top_srcdir)/lib/stdlib.in.h | \ sed -e 's|@''HAVE__EXIT''@|$(HAVE__EXIT)|g' \ -e 's|@''HAVE_ATOLL''@|$(HAVE_ATOLL)|g' \ -e 's|@''HAVE_CANONICALIZE_FILE_NAME''@|$(HAVE_CANONICALIZE_FILE_NAME)|g' \ -e 's|@''HAVE_DECL_GETLOADAVG''@|$(HAVE_DECL_GETLOADAVG)|g' \ -e 's|@''HAVE_GETSUBOPT''@|$(HAVE_GETSUBOPT)|g' \ -e 's|@''HAVE_GRANTPT''@|$(HAVE_GRANTPT)|g' \ -e 's|@''HAVE_MKDTEMP''@|$(HAVE_MKDTEMP)|g' \ -e 's|@''HAVE_MKOSTEMP''@|$(HAVE_MKOSTEMP)|g' \ -e 's|@''HAVE_MKOSTEMPS''@|$(HAVE_MKOSTEMPS)|g' \ -e 's|@''HAVE_MKSTEMP''@|$(HAVE_MKSTEMP)|g' \ -e 's|@''HAVE_MKSTEMPS''@|$(HAVE_MKSTEMPS)|g' \ -e 's|@''HAVE_POSIX_OPENPT''@|$(HAVE_POSIX_OPENPT)|g' \ -e 's|@''HAVE_PTSNAME''@|$(HAVE_PTSNAME)|g' \ -e 's|@''HAVE_PTSNAME_R''@|$(HAVE_PTSNAME_R)|g' \ -e 's|@''HAVE_QSORT_R''@|$(HAVE_QSORT_R)|g' \ -e 's|@''HAVE_RANDOM''@|$(HAVE_RANDOM)|g' \ -e 's|@''HAVE_RANDOM_H''@|$(HAVE_RANDOM_H)|g' \ -e 's|@''HAVE_RANDOM_R''@|$(HAVE_RANDOM_R)|g' \ -e 's|@''HAVE_REALPATH''@|$(HAVE_REALPATH)|g' \ -e 's|@''HAVE_RPMATCH''@|$(HAVE_RPMATCH)|g' \ -e 's|@''HAVE_SECURE_GETENV''@|$(HAVE_SECURE_GETENV)|g' \ -e 's|@''HAVE_DECL_SETENV''@|$(HAVE_DECL_SETENV)|g' \ -e 's|@''HAVE_STRTOD''@|$(HAVE_STRTOD)|g' \ -e 's|@''HAVE_STRTOLL''@|$(HAVE_STRTOLL)|g' \ -e 's|@''HAVE_STRTOULL''@|$(HAVE_STRTOULL)|g' \ -e 's|@''HAVE_STRUCT_RANDOM_DATA''@|$(HAVE_STRUCT_RANDOM_DATA)|g' \ -e 's|@''HAVE_SYS_LOADAVG_H''@|$(HAVE_SYS_LOADAVG_H)|g' \ -e 's|@''HAVE_UNLOCKPT''@|$(HAVE_UNLOCKPT)|g' \ -e 's|@''HAVE_DECL_UNSETENV''@|$(HAVE_DECL_UNSETENV)|g' \ -e 's|@''REPLACE_CALLOC''@|$(REPLACE_CALLOC)|g' \ -e 's|@''REPLACE_CANONICALIZE_FILE_NAME''@|$(REPLACE_CANONICALIZE_FILE_NAME)|g' \ -e 's|@''REPLACE_MALLOC''@|$(REPLACE_MALLOC)|g' \ -e 's|@''REPLACE_MBTOWC''@|$(REPLACE_MBTOWC)|g' \ -e 's|@''REPLACE_MKSTEMP''@|$(REPLACE_MKSTEMP)|g' \ -e 's|@''REPLACE_PTSNAME''@|$(REPLACE_PTSNAME)|g' \ -e 's|@''REPLACE_PTSNAME_R''@|$(REPLACE_PTSNAME_R)|g' \ -e 's|@''REPLACE_PUTENV''@|$(REPLACE_PUTENV)|g' \ -e 's|@''REPLACE_QSORT_R''@|$(REPLACE_QSORT_R)|g' \ -e 's|@''REPLACE_RANDOM_R''@|$(REPLACE_RANDOM_R)|g' \ -e 's|@''REPLACE_REALLOC''@|$(REPLACE_REALLOC)|g' \ -e 's|@''REPLACE_REALPATH''@|$(REPLACE_REALPATH)|g' \ -e 's|@''REPLACE_SETENV''@|$(REPLACE_SETENV)|g' \ -e 's|@''REPLACE_STRTOD''@|$(REPLACE_STRTOD)|g' \ -e 's|@''REPLACE_UNSETENV''@|$(REPLACE_UNSETENV)|g' \ -e 's|@''REPLACE_WCTOMB''@|$(REPLACE_WCTOMB)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _Noreturn/r $(_NORETURN_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/string.h: lib/string.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_STRING_H''@|$(NEXT_STRING_H)|g' \ -e 's/@''GNULIB_FFSL''@/$(GNULIB_FFSL)/g' \ -e 's/@''GNULIB_FFSLL''@/$(GNULIB_FFSLL)/g' \ -e 's/@''GNULIB_MBSLEN''@/$(GNULIB_MBSLEN)/g' \ -e 's/@''GNULIB_MBSNLEN''@/$(GNULIB_MBSNLEN)/g' \ -e 's/@''GNULIB_MBSCHR''@/$(GNULIB_MBSCHR)/g' \ -e 's/@''GNULIB_MBSRCHR''@/$(GNULIB_MBSRCHR)/g' \ -e 's/@''GNULIB_MBSSTR''@/$(GNULIB_MBSSTR)/g' \ -e 's/@''GNULIB_MBSCASECMP''@/$(GNULIB_MBSCASECMP)/g' \ -e 's/@''GNULIB_MBSNCASECMP''@/$(GNULIB_MBSNCASECMP)/g' \ -e 's/@''GNULIB_MBSPCASECMP''@/$(GNULIB_MBSPCASECMP)/g' \ -e 's/@''GNULIB_MBSCASESTR''@/$(GNULIB_MBSCASESTR)/g' \ -e 's/@''GNULIB_MBSCSPN''@/$(GNULIB_MBSCSPN)/g' \ -e 's/@''GNULIB_MBSPBRK''@/$(GNULIB_MBSPBRK)/g' \ -e 's/@''GNULIB_MBSSPN''@/$(GNULIB_MBSSPN)/g' \ -e 's/@''GNULIB_MBSSEP''@/$(GNULIB_MBSSEP)/g' \ -e 's/@''GNULIB_MBSTOK_R''@/$(GNULIB_MBSTOK_R)/g' \ -e 's/@''GNULIB_MEMCHR''@/$(GNULIB_MEMCHR)/g' \ -e 's/@''GNULIB_MEMMEM''@/$(GNULIB_MEMMEM)/g' \ -e 's/@''GNULIB_MEMPCPY''@/$(GNULIB_MEMPCPY)/g' \ -e 's/@''GNULIB_MEMRCHR''@/$(GNULIB_MEMRCHR)/g' \ -e 's/@''GNULIB_RAWMEMCHR''@/$(GNULIB_RAWMEMCHR)/g' \ -e 's/@''GNULIB_STPCPY''@/$(GNULIB_STPCPY)/g' \ -e 's/@''GNULIB_STPNCPY''@/$(GNULIB_STPNCPY)/g' \ -e 's/@''GNULIB_STRCHRNUL''@/$(GNULIB_STRCHRNUL)/g' \ -e 's/@''GNULIB_STRDUP''@/$(GNULIB_STRDUP)/g' \ -e 's/@''GNULIB_STRNCAT''@/$(GNULIB_STRNCAT)/g' \ -e 's/@''GNULIB_STRNDUP''@/$(GNULIB_STRNDUP)/g' \ -e 's/@''GNULIB_STRNLEN''@/$(GNULIB_STRNLEN)/g' \ -e 's/@''GNULIB_STRPBRK''@/$(GNULIB_STRPBRK)/g' \ -e 's/@''GNULIB_STRSEP''@/$(GNULIB_STRSEP)/g' \ -e 's/@''GNULIB_STRSTR''@/$(GNULIB_STRSTR)/g' \ -e 's/@''GNULIB_STRCASESTR''@/$(GNULIB_STRCASESTR)/g' \ -e 's/@''GNULIB_STRTOK_R''@/$(GNULIB_STRTOK_R)/g' \ -e 's/@''GNULIB_STRERROR''@/$(GNULIB_STRERROR)/g' \ -e 's/@''GNULIB_STRERROR_R''@/$(GNULIB_STRERROR_R)/g' \ -e 's/@''GNULIB_STRSIGNAL''@/$(GNULIB_STRSIGNAL)/g' \ -e 's/@''GNULIB_STRVERSCMP''@/$(GNULIB_STRVERSCMP)/g' \ < $(top_srcdir)/lib/string.in.h | \ sed -e 's|@''HAVE_FFSL''@|$(HAVE_FFSL)|g' \ -e 's|@''HAVE_FFSLL''@|$(HAVE_FFSLL)|g' \ -e 's|@''HAVE_MBSLEN''@|$(HAVE_MBSLEN)|g' \ -e 's|@''HAVE_MEMCHR''@|$(HAVE_MEMCHR)|g' \ -e 's|@''HAVE_DECL_MEMMEM''@|$(HAVE_DECL_MEMMEM)|g' \ -e 's|@''HAVE_MEMPCPY''@|$(HAVE_MEMPCPY)|g' \ -e 's|@''HAVE_DECL_MEMRCHR''@|$(HAVE_DECL_MEMRCHR)|g' \ -e 's|@''HAVE_RAWMEMCHR''@|$(HAVE_RAWMEMCHR)|g' \ -e 's|@''HAVE_STPCPY''@|$(HAVE_STPCPY)|g' \ -e 's|@''HAVE_STPNCPY''@|$(HAVE_STPNCPY)|g' \ -e 's|@''HAVE_STRCHRNUL''@|$(HAVE_STRCHRNUL)|g' \ -e 's|@''HAVE_DECL_STRDUP''@|$(HAVE_DECL_STRDUP)|g' \ -e 's|@''HAVE_DECL_STRNDUP''@|$(HAVE_DECL_STRNDUP)|g' \ -e 's|@''HAVE_DECL_STRNLEN''@|$(HAVE_DECL_STRNLEN)|g' \ -e 's|@''HAVE_STRPBRK''@|$(HAVE_STRPBRK)|g' \ -e 's|@''HAVE_STRSEP''@|$(HAVE_STRSEP)|g' \ -e 's|@''HAVE_STRCASESTR''@|$(HAVE_STRCASESTR)|g' \ -e 's|@''HAVE_DECL_STRTOK_R''@|$(HAVE_DECL_STRTOK_R)|g' \ -e 's|@''HAVE_DECL_STRERROR_R''@|$(HAVE_DECL_STRERROR_R)|g' \ -e 's|@''HAVE_DECL_STRSIGNAL''@|$(HAVE_DECL_STRSIGNAL)|g' \ -e 's|@''HAVE_STRVERSCMP''@|$(HAVE_STRVERSCMP)|g' \ -e 's|@''REPLACE_STPNCPY''@|$(REPLACE_STPNCPY)|g' \ -e 's|@''REPLACE_MEMCHR''@|$(REPLACE_MEMCHR)|g' \ -e 's|@''REPLACE_MEMMEM''@|$(REPLACE_MEMMEM)|g' \ -e 's|@''REPLACE_STRCASESTR''@|$(REPLACE_STRCASESTR)|g' \ -e 's|@''REPLACE_STRCHRNUL''@|$(REPLACE_STRCHRNUL)|g' \ -e 's|@''REPLACE_STRDUP''@|$(REPLACE_STRDUP)|g' \ -e 's|@''REPLACE_STRSTR''@|$(REPLACE_STRSTR)|g' \ -e 's|@''REPLACE_STRERROR''@|$(REPLACE_STRERROR)|g' \ -e 's|@''REPLACE_STRERROR_R''@|$(REPLACE_STRERROR_R)|g' \ -e 's|@''REPLACE_STRNCAT''@|$(REPLACE_STRNCAT)|g' \ -e 's|@''REPLACE_STRNDUP''@|$(REPLACE_STRNDUP)|g' \ -e 's|@''REPLACE_STRNLEN''@|$(REPLACE_STRNLEN)|g' \ -e 's|@''REPLACE_STRSIGNAL''@|$(REPLACE_STRSIGNAL)|g' \ -e 's|@''REPLACE_STRTOK_R''@|$(REPLACE_STRTOK_R)|g' \ -e 's|@''UNDEFINE_STRTOK_R''@|$(UNDEFINE_STRTOK_R)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \ < $(top_srcdir)/lib/string.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # has one that is incomplete. lib/sys/stat.h: lib/sys_stat.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_at)$(MKDIR_P) lib/sys $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_SYS_STAT_H''@|$(NEXT_SYS_STAT_H)|g' \ -e 's|@''WINDOWS_64_BIT_ST_SIZE''@|$(WINDOWS_64_BIT_ST_SIZE)|g' \ -e 's/@''GNULIB_FCHMODAT''@/$(GNULIB_FCHMODAT)/g' \ -e 's/@''GNULIB_FSTAT''@/$(GNULIB_FSTAT)/g' \ -e 's/@''GNULIB_FSTATAT''@/$(GNULIB_FSTATAT)/g' \ -e 's/@''GNULIB_FUTIMENS''@/$(GNULIB_FUTIMENS)/g' \ -e 's/@''GNULIB_LCHMOD''@/$(GNULIB_LCHMOD)/g' \ -e 's/@''GNULIB_LSTAT''@/$(GNULIB_LSTAT)/g' \ -e 's/@''GNULIB_MKDIRAT''@/$(GNULIB_MKDIRAT)/g' \ -e 's/@''GNULIB_MKFIFO''@/$(GNULIB_MKFIFO)/g' \ -e 's/@''GNULIB_MKFIFOAT''@/$(GNULIB_MKFIFOAT)/g' \ -e 's/@''GNULIB_MKNOD''@/$(GNULIB_MKNOD)/g' \ -e 's/@''GNULIB_MKNODAT''@/$(GNULIB_MKNODAT)/g' \ -e 's/@''GNULIB_STAT''@/$(GNULIB_STAT)/g' \ -e 's/@''GNULIB_UTIMENSAT''@/$(GNULIB_UTIMENSAT)/g' \ -e 's|@''HAVE_FCHMODAT''@|$(HAVE_FCHMODAT)|g' \ -e 's|@''HAVE_FSTATAT''@|$(HAVE_FSTATAT)|g' \ -e 's|@''HAVE_FUTIMENS''@|$(HAVE_FUTIMENS)|g' \ -e 's|@''HAVE_LCHMOD''@|$(HAVE_LCHMOD)|g' \ -e 's|@''HAVE_LSTAT''@|$(HAVE_LSTAT)|g' \ -e 's|@''HAVE_MKDIRAT''@|$(HAVE_MKDIRAT)|g' \ -e 's|@''HAVE_MKFIFO''@|$(HAVE_MKFIFO)|g' \ -e 's|@''HAVE_MKFIFOAT''@|$(HAVE_MKFIFOAT)|g' \ -e 's|@''HAVE_MKNOD''@|$(HAVE_MKNOD)|g' \ -e 's|@''HAVE_MKNODAT''@|$(HAVE_MKNODAT)|g' \ -e 's|@''HAVE_UTIMENSAT''@|$(HAVE_UTIMENSAT)|g' \ -e 's|@''REPLACE_FSTAT''@|$(REPLACE_FSTAT)|g' \ -e 's|@''REPLACE_FSTATAT''@|$(REPLACE_FSTATAT)|g' \ -e 's|@''REPLACE_FUTIMENS''@|$(REPLACE_FUTIMENS)|g' \ -e 's|@''REPLACE_LSTAT''@|$(REPLACE_LSTAT)|g' \ -e 's|@''REPLACE_MKDIR''@|$(REPLACE_MKDIR)|g' \ -e 's|@''REPLACE_MKFIFO''@|$(REPLACE_MKFIFO)|g' \ -e 's|@''REPLACE_MKNOD''@|$(REPLACE_MKNOD)|g' \ -e 's|@''REPLACE_STAT''@|$(REPLACE_STAT)|g' \ -e 's|@''REPLACE_UTIMENSAT''@|$(REPLACE_UTIMENSAT)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/sys_stat.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/sys/time.h: lib/sys_time.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_at)$(MKDIR_P) lib/sys $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's/@''HAVE_SYS_TIME_H''@/$(HAVE_SYS_TIME_H)/g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_SYS_TIME_H''@|$(NEXT_SYS_TIME_H)|g' \ -e 's/@''GNULIB_GETTIMEOFDAY''@/$(GNULIB_GETTIMEOFDAY)/g' \ -e 's|@''HAVE_WINSOCK2_H''@|$(HAVE_WINSOCK2_H)|g' \ -e 's/@''HAVE_GETTIMEOFDAY''@/$(HAVE_GETTIMEOFDAY)/g' \ -e 's/@''HAVE_STRUCT_TIMEVAL''@/$(HAVE_STRUCT_TIMEVAL)/g' \ -e 's/@''REPLACE_GETTIMEOFDAY''@/$(REPLACE_GETTIMEOFDAY)/g' \ -e 's/@''REPLACE_STRUCT_TIMEVAL''@/$(REPLACE_STRUCT_TIMEVAL)/g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/sys_time.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/sys/types.h: lib/sys_types.in.h $(top_builddir)/config.status $(AM_V_at)$(MKDIR_P) lib/sys $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_SYS_TYPES_H''@|$(NEXT_SYS_TYPES_H)|g' \ -e 's|@''WINDOWS_64_BIT_OFF_T''@|$(WINDOWS_64_BIT_OFF_T)|g' \ < $(top_srcdir)/lib/sys_types.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/time.h: lib/time.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_TIME_H''@|$(NEXT_TIME_H)|g' \ -e 's/@''GNULIB_GETTIMEOFDAY''@/$(GNULIB_GETTIMEOFDAY)/g' \ -e 's/@''GNULIB_MKTIME''@/$(GNULIB_MKTIME)/g' \ -e 's/@''GNULIB_NANOSLEEP''@/$(GNULIB_NANOSLEEP)/g' \ -e 's/@''GNULIB_STRPTIME''@/$(GNULIB_STRPTIME)/g' \ -e 's/@''GNULIB_TIMEGM''@/$(GNULIB_TIMEGM)/g' \ -e 's/@''GNULIB_TIME_R''@/$(GNULIB_TIME_R)/g' \ -e 's/@''GNULIB_TIME_RZ''@/$(GNULIB_TIME_RZ)/g' \ -e 's|@''HAVE_DECL_LOCALTIME_R''@|$(HAVE_DECL_LOCALTIME_R)|g' \ -e 's|@''HAVE_NANOSLEEP''@|$(HAVE_NANOSLEEP)|g' \ -e 's|@''HAVE_STRPTIME''@|$(HAVE_STRPTIME)|g' \ -e 's|@''HAVE_TIMEGM''@|$(HAVE_TIMEGM)|g' \ -e 's|@''HAVE_TIMEZONE_T''@|$(HAVE_TIMEZONE_T)|g' \ -e 's|@''REPLACE_GMTIME''@|$(REPLACE_GMTIME)|g' \ -e 's|@''REPLACE_LOCALTIME''@|$(REPLACE_LOCALTIME)|g' \ -e 's|@''REPLACE_LOCALTIME_R''@|$(REPLACE_LOCALTIME_R)|g' \ -e 's|@''REPLACE_MKTIME''@|$(REPLACE_MKTIME)|g' \ -e 's|@''REPLACE_NANOSLEEP''@|$(REPLACE_NANOSLEEP)|g' \ -e 's|@''REPLACE_TIMEGM''@|$(REPLACE_TIMEGM)|g' \ -e 's|@''PTHREAD_H_DEFINES_STRUCT_TIMESPEC''@|$(PTHREAD_H_DEFINES_STRUCT_TIMESPEC)|g' \ -e 's|@''SYS_TIME_H_DEFINES_STRUCT_TIMESPEC''@|$(SYS_TIME_H_DEFINES_STRUCT_TIMESPEC)|g' \ -e 's|@''TIME_H_DEFINES_STRUCT_TIMESPEC''@|$(TIME_H_DEFINES_STRUCT_TIMESPEC)|g' \ -e 's|@''UNISTD_H_DEFINES_STRUCT_TIMESPEC''@|$(UNISTD_H_DEFINES_STRUCT_TIMESPEC)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/time.in.h; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create an empty placeholder for # when the system doesn't have one. lib/unistd.h: lib/unistd.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''HAVE_UNISTD_H''@|$(HAVE_UNISTD_H)|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_UNISTD_H''@|$(NEXT_UNISTD_H)|g' \ -e 's|@''WINDOWS_64_BIT_OFF_T''@|$(WINDOWS_64_BIT_OFF_T)|g' \ -e 's/@''GNULIB_CHDIR''@/$(GNULIB_CHDIR)/g' \ -e 's/@''GNULIB_CHOWN''@/$(GNULIB_CHOWN)/g' \ -e 's/@''GNULIB_CLOSE''@/$(GNULIB_CLOSE)/g' \ -e 's/@''GNULIB_DUP''@/$(GNULIB_DUP)/g' \ -e 's/@''GNULIB_DUP2''@/$(GNULIB_DUP2)/g' \ -e 's/@''GNULIB_DUP3''@/$(GNULIB_DUP3)/g' \ -e 's/@''GNULIB_ENVIRON''@/$(GNULIB_ENVIRON)/g' \ -e 's/@''GNULIB_EUIDACCESS''@/$(GNULIB_EUIDACCESS)/g' \ -e 's/@''GNULIB_FACCESSAT''@/$(GNULIB_FACCESSAT)/g' \ -e 's/@''GNULIB_FCHDIR''@/$(GNULIB_FCHDIR)/g' \ -e 's/@''GNULIB_FCHOWNAT''@/$(GNULIB_FCHOWNAT)/g' \ -e 's/@''GNULIB_FDATASYNC''@/$(GNULIB_FDATASYNC)/g' \ -e 's/@''GNULIB_FSYNC''@/$(GNULIB_FSYNC)/g' \ -e 's/@''GNULIB_FTRUNCATE''@/$(GNULIB_FTRUNCATE)/g' \ -e 's/@''GNULIB_GETCWD''@/$(GNULIB_GETCWD)/g' \ -e 's/@''GNULIB_GETDOMAINNAME''@/$(GNULIB_GETDOMAINNAME)/g' \ -e 's/@''GNULIB_GETDTABLESIZE''@/$(GNULIB_GETDTABLESIZE)/g' \ -e 's/@''GNULIB_GETGROUPS''@/$(GNULIB_GETGROUPS)/g' \ -e 's/@''GNULIB_GETHOSTNAME''@/$(GNULIB_GETHOSTNAME)/g' \ -e 's/@''GNULIB_GETLOGIN''@/$(GNULIB_GETLOGIN)/g' \ -e 's/@''GNULIB_GETLOGIN_R''@/$(GNULIB_GETLOGIN_R)/g' \ -e 's/@''GNULIB_GETPAGESIZE''@/$(GNULIB_GETPAGESIZE)/g' \ -e 's/@''GNULIB_GETUSERSHELL''@/$(GNULIB_GETUSERSHELL)/g' \ -e 's/@''GNULIB_GROUP_MEMBER''@/$(GNULIB_GROUP_MEMBER)/g' \ -e 's/@''GNULIB_ISATTY''@/$(GNULIB_ISATTY)/g' \ -e 's/@''GNULIB_LCHOWN''@/$(GNULIB_LCHOWN)/g' \ -e 's/@''GNULIB_LINK''@/$(GNULIB_LINK)/g' \ -e 's/@''GNULIB_LINKAT''@/$(GNULIB_LINKAT)/g' \ -e 's/@''GNULIB_LSEEK''@/$(GNULIB_LSEEK)/g' \ -e 's/@''GNULIB_PIPE''@/$(GNULIB_PIPE)/g' \ -e 's/@''GNULIB_PIPE2''@/$(GNULIB_PIPE2)/g' \ -e 's/@''GNULIB_PREAD''@/$(GNULIB_PREAD)/g' \ -e 's/@''GNULIB_PWRITE''@/$(GNULIB_PWRITE)/g' \ -e 's/@''GNULIB_READ''@/$(GNULIB_READ)/g' \ -e 's/@''GNULIB_READLINK''@/$(GNULIB_READLINK)/g' \ -e 's/@''GNULIB_READLINKAT''@/$(GNULIB_READLINKAT)/g' \ -e 's/@''GNULIB_RMDIR''@/$(GNULIB_RMDIR)/g' \ -e 's/@''GNULIB_SETHOSTNAME''@/$(GNULIB_SETHOSTNAME)/g' \ -e 's/@''GNULIB_SLEEP''@/$(GNULIB_SLEEP)/g' \ -e 's/@''GNULIB_SYMLINK''@/$(GNULIB_SYMLINK)/g' \ -e 's/@''GNULIB_SYMLINKAT''@/$(GNULIB_SYMLINKAT)/g' \ -e 's/@''GNULIB_TTYNAME_R''@/$(GNULIB_TTYNAME_R)/g' \ -e 's/@''GNULIB_UNISTD_H_GETOPT''@/0$(GNULIB_GL_UNISTD_H_GETOPT)/g' \ -e 's/@''GNULIB_UNISTD_H_NONBLOCKING''@/$(GNULIB_UNISTD_H_NONBLOCKING)/g' \ -e 's/@''GNULIB_UNISTD_H_SIGPIPE''@/$(GNULIB_UNISTD_H_SIGPIPE)/g' \ -e 's/@''GNULIB_UNLINK''@/$(GNULIB_UNLINK)/g' \ -e 's/@''GNULIB_UNLINKAT''@/$(GNULIB_UNLINKAT)/g' \ -e 's/@''GNULIB_USLEEP''@/$(GNULIB_USLEEP)/g' \ -e 's/@''GNULIB_WRITE''@/$(GNULIB_WRITE)/g' \ < $(top_srcdir)/lib/unistd.in.h | \ sed -e 's|@''HAVE_CHOWN''@|$(HAVE_CHOWN)|g' \ -e 's|@''HAVE_DUP2''@|$(HAVE_DUP2)|g' \ -e 's|@''HAVE_DUP3''@|$(HAVE_DUP3)|g' \ -e 's|@''HAVE_EUIDACCESS''@|$(HAVE_EUIDACCESS)|g' \ -e 's|@''HAVE_FACCESSAT''@|$(HAVE_FACCESSAT)|g' \ -e 's|@''HAVE_FCHDIR''@|$(HAVE_FCHDIR)|g' \ -e 's|@''HAVE_FCHOWNAT''@|$(HAVE_FCHOWNAT)|g' \ -e 's|@''HAVE_FDATASYNC''@|$(HAVE_FDATASYNC)|g' \ -e 's|@''HAVE_FSYNC''@|$(HAVE_FSYNC)|g' \ -e 's|@''HAVE_FTRUNCATE''@|$(HAVE_FTRUNCATE)|g' \ -e 's|@''HAVE_GETDTABLESIZE''@|$(HAVE_GETDTABLESIZE)|g' \ -e 's|@''HAVE_GETGROUPS''@|$(HAVE_GETGROUPS)|g' \ -e 's|@''HAVE_GETHOSTNAME''@|$(HAVE_GETHOSTNAME)|g' \ -e 's|@''HAVE_GETPAGESIZE''@|$(HAVE_GETPAGESIZE)|g' \ -e 's|@''HAVE_GROUP_MEMBER''@|$(HAVE_GROUP_MEMBER)|g' \ -e 's|@''HAVE_LCHOWN''@|$(HAVE_LCHOWN)|g' \ -e 's|@''HAVE_LINK''@|$(HAVE_LINK)|g' \ -e 's|@''HAVE_LINKAT''@|$(HAVE_LINKAT)|g' \ -e 's|@''HAVE_PIPE''@|$(HAVE_PIPE)|g' \ -e 's|@''HAVE_PIPE2''@|$(HAVE_PIPE2)|g' \ -e 's|@''HAVE_PREAD''@|$(HAVE_PREAD)|g' \ -e 's|@''HAVE_PWRITE''@|$(HAVE_PWRITE)|g' \ -e 's|@''HAVE_READLINK''@|$(HAVE_READLINK)|g' \ -e 's|@''HAVE_READLINKAT''@|$(HAVE_READLINKAT)|g' \ -e 's|@''HAVE_SETHOSTNAME''@|$(HAVE_SETHOSTNAME)|g' \ -e 's|@''HAVE_SLEEP''@|$(HAVE_SLEEP)|g' \ -e 's|@''HAVE_SYMLINK''@|$(HAVE_SYMLINK)|g' \ -e 's|@''HAVE_SYMLINKAT''@|$(HAVE_SYMLINKAT)|g' \ -e 's|@''HAVE_UNLINKAT''@|$(HAVE_UNLINKAT)|g' \ -e 's|@''HAVE_USLEEP''@|$(HAVE_USLEEP)|g' \ -e 's|@''HAVE_DECL_ENVIRON''@|$(HAVE_DECL_ENVIRON)|g' \ -e 's|@''HAVE_DECL_FCHDIR''@|$(HAVE_DECL_FCHDIR)|g' \ -e 's|@''HAVE_DECL_FDATASYNC''@|$(HAVE_DECL_FDATASYNC)|g' \ -e 's|@''HAVE_DECL_GETDOMAINNAME''@|$(HAVE_DECL_GETDOMAINNAME)|g' \ -e 's|@''HAVE_DECL_GETLOGIN''@|$(HAVE_DECL_GETLOGIN)|g' \ -e 's|@''HAVE_DECL_GETLOGIN_R''@|$(HAVE_DECL_GETLOGIN_R)|g' \ -e 's|@''HAVE_DECL_GETPAGESIZE''@|$(HAVE_DECL_GETPAGESIZE)|g' \ -e 's|@''HAVE_DECL_GETUSERSHELL''@|$(HAVE_DECL_GETUSERSHELL)|g' \ -e 's|@''HAVE_DECL_SETHOSTNAME''@|$(HAVE_DECL_SETHOSTNAME)|g' \ -e 's|@''HAVE_DECL_TTYNAME_R''@|$(HAVE_DECL_TTYNAME_R)|g' \ -e 's|@''HAVE_OS_H''@|$(HAVE_OS_H)|g' \ -e 's|@''HAVE_SYS_PARAM_H''@|$(HAVE_SYS_PARAM_H)|g' \ | \ sed -e 's|@''REPLACE_CHOWN''@|$(REPLACE_CHOWN)|g' \ -e 's|@''REPLACE_CLOSE''@|$(REPLACE_CLOSE)|g' \ -e 's|@''REPLACE_DUP''@|$(REPLACE_DUP)|g' \ -e 's|@''REPLACE_DUP2''@|$(REPLACE_DUP2)|g' \ -e 's|@''REPLACE_FCHOWNAT''@|$(REPLACE_FCHOWNAT)|g' \ -e 's|@''REPLACE_FTRUNCATE''@|$(REPLACE_FTRUNCATE)|g' \ -e 's|@''REPLACE_GETCWD''@|$(REPLACE_GETCWD)|g' \ -e 's|@''REPLACE_GETDOMAINNAME''@|$(REPLACE_GETDOMAINNAME)|g' \ -e 's|@''REPLACE_GETDTABLESIZE''@|$(REPLACE_GETDTABLESIZE)|g' \ -e 's|@''REPLACE_GETLOGIN_R''@|$(REPLACE_GETLOGIN_R)|g' \ -e 's|@''REPLACE_GETGROUPS''@|$(REPLACE_GETGROUPS)|g' \ -e 's|@''REPLACE_GETPAGESIZE''@|$(REPLACE_GETPAGESIZE)|g' \ -e 's|@''REPLACE_ISATTY''@|$(REPLACE_ISATTY)|g' \ -e 's|@''REPLACE_LCHOWN''@|$(REPLACE_LCHOWN)|g' \ -e 's|@''REPLACE_LINK''@|$(REPLACE_LINK)|g' \ -e 's|@''REPLACE_LINKAT''@|$(REPLACE_LINKAT)|g' \ -e 's|@''REPLACE_LSEEK''@|$(REPLACE_LSEEK)|g' \ -e 's|@''REPLACE_PREAD''@|$(REPLACE_PREAD)|g' \ -e 's|@''REPLACE_PWRITE''@|$(REPLACE_PWRITE)|g' \ -e 's|@''REPLACE_READ''@|$(REPLACE_READ)|g' \ -e 's|@''REPLACE_READLINK''@|$(REPLACE_READLINK)|g' \ -e 's|@''REPLACE_READLINKAT''@|$(REPLACE_READLINKAT)|g' \ -e 's|@''REPLACE_RMDIR''@|$(REPLACE_RMDIR)|g' \ -e 's|@''REPLACE_SLEEP''@|$(REPLACE_SLEEP)|g' \ -e 's|@''REPLACE_SYMLINK''@|$(REPLACE_SYMLINK)|g' \ -e 's|@''REPLACE_SYMLINKAT''@|$(REPLACE_SYMLINKAT)|g' \ -e 's|@''REPLACE_TTYNAME_R''@|$(REPLACE_TTYNAME_R)|g' \ -e 's|@''REPLACE_UNLINK''@|$(REPLACE_UNLINK)|g' \ -e 's|@''REPLACE_UNLINKAT''@|$(REPLACE_UNLINKAT)|g' \ -e 's|@''REPLACE_USLEEP''@|$(REPLACE_USLEEP)|g' \ -e 's|@''REPLACE_WRITE''@|$(REPLACE_WRITE)|g' \ -e 's|@''UNISTD_H_HAVE_WINSOCK2_H''@|$(UNISTD_H_HAVE_WINSOCK2_H)|g' \ -e 's|@''UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS''@|$(UNISTD_H_HAVE_WINSOCK2_H_AND_USE_SOCKETS)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # version does not work standalone. lib/wchar.h: lib/wchar.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(ARG_NONNULL_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''HAVE_FEATURES_H''@|$(HAVE_FEATURES_H)|g' \ -e 's|@''NEXT_WCHAR_H''@|$(NEXT_WCHAR_H)|g' \ -e 's|@''HAVE_WCHAR_H''@|$(HAVE_WCHAR_H)|g' \ -e 's/@''GNULIB_OVERRIDES_WINT_T''@/$(GNULIB_OVERRIDES_WINT_T)/g' \ -e 's/@''GNULIB_BTOWC''@/$(GNULIB_BTOWC)/g' \ -e 's/@''GNULIB_WCTOB''@/$(GNULIB_WCTOB)/g' \ -e 's/@''GNULIB_MBSINIT''@/$(GNULIB_MBSINIT)/g' \ -e 's/@''GNULIB_MBRTOWC''@/$(GNULIB_MBRTOWC)/g' \ -e 's/@''GNULIB_MBRLEN''@/$(GNULIB_MBRLEN)/g' \ -e 's/@''GNULIB_MBSRTOWCS''@/$(GNULIB_MBSRTOWCS)/g' \ -e 's/@''GNULIB_MBSNRTOWCS''@/$(GNULIB_MBSNRTOWCS)/g' \ -e 's/@''GNULIB_WCRTOMB''@/$(GNULIB_WCRTOMB)/g' \ -e 's/@''GNULIB_WCSRTOMBS''@/$(GNULIB_WCSRTOMBS)/g' \ -e 's/@''GNULIB_WCSNRTOMBS''@/$(GNULIB_WCSNRTOMBS)/g' \ -e 's/@''GNULIB_WCWIDTH''@/$(GNULIB_WCWIDTH)/g' \ -e 's/@''GNULIB_WMEMCHR''@/$(GNULIB_WMEMCHR)/g' \ -e 's/@''GNULIB_WMEMCMP''@/$(GNULIB_WMEMCMP)/g' \ -e 's/@''GNULIB_WMEMCPY''@/$(GNULIB_WMEMCPY)/g' \ -e 's/@''GNULIB_WMEMMOVE''@/$(GNULIB_WMEMMOVE)/g' \ -e 's/@''GNULIB_WMEMSET''@/$(GNULIB_WMEMSET)/g' \ -e 's/@''GNULIB_WCSLEN''@/$(GNULIB_WCSLEN)/g' \ -e 's/@''GNULIB_WCSNLEN''@/$(GNULIB_WCSNLEN)/g' \ -e 's/@''GNULIB_WCSCPY''@/$(GNULIB_WCSCPY)/g' \ -e 's/@''GNULIB_WCPCPY''@/$(GNULIB_WCPCPY)/g' \ -e 's/@''GNULIB_WCSNCPY''@/$(GNULIB_WCSNCPY)/g' \ -e 's/@''GNULIB_WCPNCPY''@/$(GNULIB_WCPNCPY)/g' \ -e 's/@''GNULIB_WCSCAT''@/$(GNULIB_WCSCAT)/g' \ -e 's/@''GNULIB_WCSNCAT''@/$(GNULIB_WCSNCAT)/g' \ -e 's/@''GNULIB_WCSCMP''@/$(GNULIB_WCSCMP)/g' \ -e 's/@''GNULIB_WCSNCMP''@/$(GNULIB_WCSNCMP)/g' \ -e 's/@''GNULIB_WCSCASECMP''@/$(GNULIB_WCSCASECMP)/g' \ -e 's/@''GNULIB_WCSNCASECMP''@/$(GNULIB_WCSNCASECMP)/g' \ -e 's/@''GNULIB_WCSCOLL''@/$(GNULIB_WCSCOLL)/g' \ -e 's/@''GNULIB_WCSXFRM''@/$(GNULIB_WCSXFRM)/g' \ -e 's/@''GNULIB_WCSDUP''@/$(GNULIB_WCSDUP)/g' \ -e 's/@''GNULIB_WCSCHR''@/$(GNULIB_WCSCHR)/g' \ -e 's/@''GNULIB_WCSRCHR''@/$(GNULIB_WCSRCHR)/g' \ -e 's/@''GNULIB_WCSCSPN''@/$(GNULIB_WCSCSPN)/g' \ -e 's/@''GNULIB_WCSSPN''@/$(GNULIB_WCSSPN)/g' \ -e 's/@''GNULIB_WCSPBRK''@/$(GNULIB_WCSPBRK)/g' \ -e 's/@''GNULIB_WCSSTR''@/$(GNULIB_WCSSTR)/g' \ -e 's/@''GNULIB_WCSTOK''@/$(GNULIB_WCSTOK)/g' \ -e 's/@''GNULIB_WCSWIDTH''@/$(GNULIB_WCSWIDTH)/g' \ < $(top_srcdir)/lib/wchar.in.h | \ sed -e 's|@''HAVE_WINT_T''@|$(HAVE_WINT_T)|g' \ -e 's|@''HAVE_BTOWC''@|$(HAVE_BTOWC)|g' \ -e 's|@''HAVE_MBSINIT''@|$(HAVE_MBSINIT)|g' \ -e 's|@''HAVE_MBRTOWC''@|$(HAVE_MBRTOWC)|g' \ -e 's|@''HAVE_MBRLEN''@|$(HAVE_MBRLEN)|g' \ -e 's|@''HAVE_MBSRTOWCS''@|$(HAVE_MBSRTOWCS)|g' \ -e 's|@''HAVE_MBSNRTOWCS''@|$(HAVE_MBSNRTOWCS)|g' \ -e 's|@''HAVE_WCRTOMB''@|$(HAVE_WCRTOMB)|g' \ -e 's|@''HAVE_WCSRTOMBS''@|$(HAVE_WCSRTOMBS)|g' \ -e 's|@''HAVE_WCSNRTOMBS''@|$(HAVE_WCSNRTOMBS)|g' \ -e 's|@''HAVE_WMEMCHR''@|$(HAVE_WMEMCHR)|g' \ -e 's|@''HAVE_WMEMCMP''@|$(HAVE_WMEMCMP)|g' \ -e 's|@''HAVE_WMEMCPY''@|$(HAVE_WMEMCPY)|g' \ -e 's|@''HAVE_WMEMMOVE''@|$(HAVE_WMEMMOVE)|g' \ -e 's|@''HAVE_WMEMSET''@|$(HAVE_WMEMSET)|g' \ -e 's|@''HAVE_WCSLEN''@|$(HAVE_WCSLEN)|g' \ -e 's|@''HAVE_WCSNLEN''@|$(HAVE_WCSNLEN)|g' \ -e 's|@''HAVE_WCSCPY''@|$(HAVE_WCSCPY)|g' \ -e 's|@''HAVE_WCPCPY''@|$(HAVE_WCPCPY)|g' \ -e 's|@''HAVE_WCSNCPY''@|$(HAVE_WCSNCPY)|g' \ -e 's|@''HAVE_WCPNCPY''@|$(HAVE_WCPNCPY)|g' \ -e 's|@''HAVE_WCSCAT''@|$(HAVE_WCSCAT)|g' \ -e 's|@''HAVE_WCSNCAT''@|$(HAVE_WCSNCAT)|g' \ -e 's|@''HAVE_WCSCMP''@|$(HAVE_WCSCMP)|g' \ -e 's|@''HAVE_WCSNCMP''@|$(HAVE_WCSNCMP)|g' \ -e 's|@''HAVE_WCSCASECMP''@|$(HAVE_WCSCASECMP)|g' \ -e 's|@''HAVE_WCSNCASECMP''@|$(HAVE_WCSNCASECMP)|g' \ -e 's|@''HAVE_WCSCOLL''@|$(HAVE_WCSCOLL)|g' \ -e 's|@''HAVE_WCSXFRM''@|$(HAVE_WCSXFRM)|g' \ -e 's|@''HAVE_WCSDUP''@|$(HAVE_WCSDUP)|g' \ -e 's|@''HAVE_WCSCHR''@|$(HAVE_WCSCHR)|g' \ -e 's|@''HAVE_WCSRCHR''@|$(HAVE_WCSRCHR)|g' \ -e 's|@''HAVE_WCSCSPN''@|$(HAVE_WCSCSPN)|g' \ -e 's|@''HAVE_WCSSPN''@|$(HAVE_WCSSPN)|g' \ -e 's|@''HAVE_WCSPBRK''@|$(HAVE_WCSPBRK)|g' \ -e 's|@''HAVE_WCSSTR''@|$(HAVE_WCSSTR)|g' \ -e 's|@''HAVE_WCSTOK''@|$(HAVE_WCSTOK)|g' \ -e 's|@''HAVE_WCSWIDTH''@|$(HAVE_WCSWIDTH)|g' \ -e 's|@''HAVE_DECL_WCTOB''@|$(HAVE_DECL_WCTOB)|g' \ -e 's|@''HAVE_DECL_WCWIDTH''@|$(HAVE_DECL_WCWIDTH)|g' \ | \ sed -e 's|@''REPLACE_MBSTATE_T''@|$(REPLACE_MBSTATE_T)|g' \ -e 's|@''REPLACE_BTOWC''@|$(REPLACE_BTOWC)|g' \ -e 's|@''REPLACE_WCTOB''@|$(REPLACE_WCTOB)|g' \ -e 's|@''REPLACE_MBSINIT''@|$(REPLACE_MBSINIT)|g' \ -e 's|@''REPLACE_MBRTOWC''@|$(REPLACE_MBRTOWC)|g' \ -e 's|@''REPLACE_MBRLEN''@|$(REPLACE_MBRLEN)|g' \ -e 's|@''REPLACE_MBSRTOWCS''@|$(REPLACE_MBSRTOWCS)|g' \ -e 's|@''REPLACE_MBSNRTOWCS''@|$(REPLACE_MBSNRTOWCS)|g' \ -e 's|@''REPLACE_WCRTOMB''@|$(REPLACE_WCRTOMB)|g' \ -e 's|@''REPLACE_WCSRTOMBS''@|$(REPLACE_WCSRTOMBS)|g' \ -e 's|@''REPLACE_WCSNRTOMBS''@|$(REPLACE_WCSNRTOMBS)|g' \ -e 's|@''REPLACE_WCWIDTH''@|$(REPLACE_WCWIDTH)|g' \ -e 's|@''REPLACE_WCSWIDTH''@|$(REPLACE_WCSWIDTH)|g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_ARG_NONNULL/r $(ARG_NONNULL_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)'; \ } > $@-t && \ mv $@-t $@ # We need the following in order to create when the system # doesn't have one that works with the given compiler. lib/wctype.h: lib/wctype.in.h $(top_builddir)/config.status $(CXXDEFS_H) $(WARN_ON_USE_H) $(AM_V_GEN)rm -f $@-t $@ && \ { echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \ sed -e 's|@''GUARD_PREFIX''@|GL|g' \ -e 's/@''HAVE_WCTYPE_H''@/$(HAVE_WCTYPE_H)/g' \ -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \ -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \ -e 's|@''PRAGMA_COLUMNS''@||g' \ -e 's|@''NEXT_WCTYPE_H''@|$(NEXT_WCTYPE_H)|g' \ -e 's/@''GNULIB_OVERRIDES_WINT_T''@/$(GNULIB_OVERRIDES_WINT_T)/g' \ -e 's/@''GNULIB_ISWBLANK''@/$(GNULIB_ISWBLANK)/g' \ -e 's/@''GNULIB_WCTYPE''@/$(GNULIB_WCTYPE)/g' \ -e 's/@''GNULIB_ISWCTYPE''@/$(GNULIB_ISWCTYPE)/g' \ -e 's/@''GNULIB_WCTRANS''@/$(GNULIB_WCTRANS)/g' \ -e 's/@''GNULIB_TOWCTRANS''@/$(GNULIB_TOWCTRANS)/g' \ -e 's/@''HAVE_ISWBLANK''@/$(HAVE_ISWBLANK)/g' \ -e 's/@''HAVE_ISWCNTRL''@/$(HAVE_ISWCNTRL)/g' \ -e 's/@''HAVE_WCTYPE_T''@/$(HAVE_WCTYPE_T)/g' \ -e 's/@''HAVE_WCTRANS_T''@/$(HAVE_WCTRANS_T)/g' \ -e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \ -e 's/@''REPLACE_ISWBLANK''@/$(REPLACE_ISWBLANK)/g' \ -e 's/@''REPLACE_ISWCNTRL''@/$(REPLACE_ISWCNTRL)/g' \ -e 's/@''REPLACE_TOWLOWER''@/$(REPLACE_TOWLOWER)/g' \ -e '/definitions of _GL_FUNCDECL_RPL/r $(CXXDEFS_H)' \ -e '/definition of _GL_WARN_ON_USE/r $(WARN_ON_USE_H)' \ < $(top_srcdir)/lib/wctype.in.h; \ } > $@-t && \ mv $@-t $@ mostlyclean-local: mostlyclean-generic @for dir in '' $(MOSTLYCLEANDIRS); do \ if test -n "$$dir" && test -d $$dir; then \ echo "rmdir $$dir"; rmdir $$dir; \ fi; \ done; \ : $(sed_sed_OBJECTS): $(BUILT_SOURCES) sed/version.c: Makefile $(AM_V_GEN)rm -f $@ $(AM_V_at)printf '#include \n' > $@t $(AM_V_at)printf 'char const *Version = "$(PACKAGE_VERSION)";\n' >> $@t $(AM_V_at)chmod a-w $@t $(AM_V_at)mv $@t $@ sed/version.h: Makefile $(AM_V_GEN)rm -f $@ $(AM_V_at)printf 'extern char const *Version;\n' > $@t $(AM_V_at)chmod a-w $@t $(AM_V_at)mv $@t $@ #doc/sed.1: sed/sed$(EXEEXT) .version $(srcdir)/doc/sed.x # $(AM_V_GEN)$(MKDIR_P) doc # $(AM_V_at)rm -rf $@ $@-t # $(AM_V_at)$(HELP2MAN) \ # --name 'stream editor for filtering and transforming text' \ # -p sed --include $(srcdir)/doc/sed.x \ # -o $@-t $(SEDBIN) \ # && chmod a-w $@-t \ # && mv $@-t $@ #doc/sed.1: doc/sed-dummy.1 # $(AM_V_at)$(SED) 's/VERSION/$(PACKAGE_VERSION)/' $< > $@-t \ # && chmod a-w $@-t \ # && mv $@-t $@ # automake makes `check' depend on $(TESTS). Declare # dummy targets for $(TESTS) so that make does not complain. .PHONY: $(SEDTESTS) $(SEDTESTS): # Remove the generated sed.1 file, but only for a non-srcdir build. # Without this, 'make distcheck's final comparison would fail. # Also remove lib/.deps/{getfilecon,obstack}.Po, # which are left behind by bleeding edge automake. # Without this, 'make distcheck's final comparison would fail. distclean-local: test x$(srcdir) = x$(builddir) || rm -f $(dist_man_MANS) rm -f lib/.deps/getfilecon.Po lib/.deps/obstack.Po # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: