# Makefile.in generated by automake 1.16.2 from Makefile.am.
# Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2020 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# aminclude_static.am generated automatically by Autoconf
# from AX_AM_MACROS_STATIC on Thu Jul  2 11:10:32 BST 2020


am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/dbus
pkgincludedir = $(includedir)/dbus
pkglibdir = $(libdir)/dbus
pkglibexecdir = $(libexecdir)/dbus
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = arm-openwrt-linux-gnu
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \
	$(top_srcdir)/m4/ax_ac_append_to_file.m4 \
	$(top_srcdir)/m4/ax_ac_print_to_file.m4 \
	$(top_srcdir)/m4/ax_add_am_macro_static.m4 \
	$(top_srcdir)/m4/ax_am_macros_static.m4 \
	$(top_srcdir)/m4/ax_code_coverage.m4 \
	$(top_srcdir)/m4/ax_file_escapes.m4 \
	$(top_srcdir)/m4/ld-version-script.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/pkg.m4 \
	$(top_srcdir)/m4/visibility.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = Doxyfile bus/legacy-config/system.conf \
	bus/legacy-config/session.conf bus/systemd-user/dbus.service \
	bus/systemd-user/dbus.socket bus/sysusers.d/dbus.conf \
	bus/tmpfiles.d/dbus.conf dbus-1.pc dbus-1-uninstalled.pc \
	cmake/DBus1Config.cmake cmake/DBus1ConfigVersion.cmake
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(cmakeconfigdir)" \
	"$(DESTDIR)$(pkgconfigdir)"
DATA = $(cmakeconfig_DATA) $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
	config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.in \
	$(srcdir)/config.h.in $(srcdir)/dbus-1-uninstalled.pc.in \
	$(srcdir)/dbus-1.pc.in $(top_srcdir)/aminclude_static.am \
	$(top_srcdir)/build-aux/compile \
	$(top_srcdir)/build-aux/config.guess \
	$(top_srcdir)/build-aux/config.sub \
	$(top_srcdir)/build-aux/install-sh \
	$(top_srcdir)/build-aux/ltmain.sh \
	$(top_srcdir)/build-aux/missing \
	$(top_srcdir)/build-aux/tap-driver.sh \
	$(top_srcdir)/bus/legacy-config/session.conf.in \
	$(top_srcdir)/bus/legacy-config/system.conf.in \
	$(top_srcdir)/bus/systemd-user/dbus.service.in \
	$(top_srcdir)/bus/systemd-user/dbus.socket.in \
	$(top_srcdir)/bus/sysusers.d/dbus.conf.in \
	$(top_srcdir)/bus/tmpfiles.d/dbus.conf.in \
	$(top_srcdir)/cmake/DBus1Config.pkgconfig.in \
	$(top_srcdir)/cmake/DBus1ConfigVersion.cmake.in AUTHORS \
	COPYING INSTALL NEWS README build-aux/compile \
	build-aux/config.guess build-aux/config.sub build-aux/depcomp \
	build-aux/install-sh build-aux/ltmain.sh build-aux/missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = --best
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/build-aux/missing aclocal-1.16
ADT_LIBS = 
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 0
APPARMOR_2_10_CFLAGS = 
APPARMOR_2_10_LIBS = 
APPARMOR_CFLAGS = 
APPARMOR_LIBS = 
AR = arm-openwrt-linux-muslgnueabi-gcc-ar
AUTOCONF = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/build-aux/missing autoconf
AUTOHEADER = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/build-aux/missing autoheader
AUTOMAKE = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/build-aux/missing automake-1.16
AWK = gawk
BUILD_FILEVERSION = 
BUILD_TIMESTAMP = 
CC = arm-openwrt-linux-muslgnueabi-gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -fno-strict-aliasing -fno-common -Wnested-externs -Wmissing-prototypes -Wstrict-prototypes -Wdeclaration-after-statement -Wimplicit-function-declaration -Wold-style-definition -Wjump-misses-init -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wswitch-enum -Wswitch-default -Wduplicated-cond -Wduplicated-branches -Wlogical-op -Wrestrict -Wnull-dereference -Wdouble-promotion -Wchar-subscripts -Wfloat-equal -Wpointer-sign -Wno-unused-label -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=unused-label -Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18=dbus-1.13.18 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro 
CFLAG_VISIBILITY = -fvisibility=hidden
CODE_COVERAGE_CFLAGS = 
CODE_COVERAGE_CPPFLAGS = 
CODE_COVERAGE_CXXFLAGS = 
CODE_COVERAGE_ENABLED = no
CODE_COVERAGE_LIBS = 
CPP = arm-openwrt-linux-muslgnueabi-gcc -E
CPPFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-arm_arm1176jzf-s+vfp_gcc-11.2.0_musl_eabi/usr/include -I/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-arm_arm1176jzf-s+vfp_gcc-11.2.0_musl_eabi/include/fortify -I/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-arm_arm1176jzf-s+vfp_gcc-11.2.0_musl_eabi/include 
CXX = arm-openwrt-linux-muslgnueabi-g++
CXXCPP = arm-openwrt-linux-muslgnueabi-g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -fno-strict-aliasing -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wno-overloaded-virtual -Wswitch-enum -Wswitch-default -Wchar-subscripts -Wfloat-equal -Wno-unused-label -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=overloaded-virtual -Wno-error=unused-label -Os -pipe -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=hard -fmacro-prefix-map=/mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18=dbus-1.13.18 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro 
CYGPATH_W = echo
DATADIR_FROM_PKGSYSCONFDIR = /usr/share
DBUS_BINDIR = /usr/bin
DBUS_CONSOLE_OWNER_FILE = 
DBUS_DAEMONDIR = /usr/bin
DBUS_DATADIR = /usr/share
DBUS_GENERATE_MAN = YES
DBUS_INT16_TYPE = short
DBUS_INT32_TYPE = int
DBUS_INT64_CONSTANT = (val##LL)
DBUS_INT64_TYPE = long long
DBUS_LIBEXECDIR = /usr/lib
DBUS_MAJOR_VERSION = 1
DBUS_MICRO_VERSION = 18
DBUS_MINOR_VERSION = 13
DBUS_PREFIX = /usr
DBUS_SESSION_BUS_CONNECT_ADDRESS = autolaunch:
DBUS_SESSION_BUS_LISTEN_ADDRESS = unix:tmpdir=/tmp
DBUS_SESSION_CONF_MAYBE_AUTH_EXTERNAL = <auth>EXTERNAL</auth>
DBUS_SESSION_SOCKET_DIR = /tmp
DBUS_STATIC_BUILD_CPPFLAGS = 
DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = unix:path=/var/run/dbus/system_bus_socket
DBUS_SYSTEM_PID_FILE = /var/run/dbus.pid
DBUS_SYSTEM_SOCKET = /var/run/dbus/system_bus_socket
DBUS_TEST_DATA = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/test/data
DBUS_TEST_EXEC = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/test
DBUS_TEST_USER = nobody
DBUS_UINT64_CONSTANT = (val##ULL)
DBUS_USER = root
DBUS_VERSION = 1.13.18
DBUS_VER_FILE_TYPE = 
DBUS_VER_INTERNAL_NAME = 
DBUS_VER_ORIGINAL_NAME = 
DBUS_X_CFLAGS = 
DBUS_X_LIBS = 
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DOXYGEN = no
DOXYGEN_GENERATE_QHP = NO
DOXYGEN_QCH_FILE = 
DOXYGEN_QHG_LOCATION = 
DSYMUTIL = 
DUCKTYPE = no
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/grep -E
EXEEXT = 
EXPANDED_BINDIR = /usr/bin
EXPANDED_DATADIR = /usr/share
EXPANDED_LIBDIR = /usr/lib
EXPANDED_LIBEXECDIR = /usr/lib
EXPANDED_LOCALSTATEDIR = /var
EXPANDED_PREFIX = /usr
EXPANDED_RUNSTATEDIR = /var/run
EXPANDED_SYSCONFDIR = /etc
EXPAT_CFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/usr/include 
EXPAT_LIBS = -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/usr/lib -lexpat 
EXTRA_CFLAGS = -fno-strict-aliasing -fno-common -Wnested-externs -Wmissing-prototypes -Wstrict-prototypes -Wdeclaration-after-statement -Wimplicit-function-declaration -Wold-style-definition -Wjump-misses-init -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wswitch-enum -Wswitch-default -Wduplicated-cond -Wduplicated-branches -Wlogical-op -Wrestrict -Wnull-dereference -Wdouble-promotion -Wchar-subscripts -Wfloat-equal -Wpointer-sign -Wno-unused-label -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=unused-label
EXTRA_CXXFLAGS = -fno-strict-aliasing -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wno-overloaded-virtual -Wswitch-enum -Wswitch-default -Wchar-subscripts -Wfloat-equal -Wno-unused-label -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=overloaded-virtual -Wno-error=unused-label
EXTRA_LDFLAGS = -Wl,--no-as-needed
FGREP = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/grep -F
GCOV = 
GENHTML = 
GETTEXT_PACKAGE = dbus-1
GIO_UNIX_CFLAGS = 
GIO_UNIX_LIBS = 
GLIB_CFLAGS = 
GLIB_LIBS = 
GREP = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/grep
HAVE_VISIBILITY = 1
INSTALL = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LAUNCHCTL = 
LAUNCHD_AGENT_DIR = /Library/LaunchAgents
LCOV = 
LD = arm-openwrt-linux-muslgnueabi-ld
LDFLAGS = -Wl,--no-as-needed -L/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-arm_arm1176jzf-s+vfp_gcc-11.2.0_musl_eabi/usr/lib -L/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-arm_arm1176jzf-s+vfp_gcc-11.2.0_musl_eabi/lib -znow -zrelro 
LIBDBUS_LIBS =    
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LT_AGE = 29
LT_CURRENT = 32
LT_REVISION = 0
LT_SYS_LIBRARY_PATH = 
MAINT = #
MAKEINFO = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/build-aux/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
NETWORK_libs = 
NM = arm-openwrt-linux-muslgnueabi-gcc-nm
NMEDIT = 
OBJDUMP = arm-openwrt-linux-muslgnueabi-objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = dbus
PACKAGE_BUGREPORT = https://gitlab.freedesktop.org/dbus/dbus/issues
PACKAGE_NAME = dbus
PACKAGE_STRING = dbus 1.13.18
PACKAGE_TARNAME = dbus
PACKAGE_URL = 
PACKAGE_VERSION = 1.13.18
PATH_SEPARATOR = :
PKG_CONFIG = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/pkg-config
QHELPGENERATOR = 
RANLIB = arm-openwrt-linux-muslgnueabi-gcc-ranlib
RC = 
R_DYNAMIC_LDFLAG = 
SANITIZE_CFLAGS = 
SED = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/sed
SELINUX_CFLAGS = 
SELINUX_LIBS = 
SET_MAKE = 
SHELL = /bin/sh
SOVERSION = 3
STRIP = arm-openwrt-linux-muslgnueabi-strip
SYSCONFDIR_FROM_PKGDATADIR = /etc
SYSTEMCTL = /usr/bin/systemctl
SYSTEMD_CFLAGS = 
SYSTEMD_LIBS = 
TEST_LAUNCH_HELPER_BINARY = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/test/dbus-daemon-launch-helper-for-tests
TEST_LISTEN = unix:tmpdir=/mnt/gold/openwrt/openwrt_2203/tmp
TEST_SOCKET_DIR = /mnt/gold/openwrt/openwrt_2203/tmp
THREAD_LIBS =  
VALGRIND_CFLAGS = 
VALGRIND_LIBS = 
VERSION = 1.13.18
WARN_CFLAGS = -fno-strict-aliasing -Wnested-externs -Wmissing-prototypes -Wstrict-prototypes -Wdeclaration-after-statement -Wimplicit-function-declaration -Wold-style-definition -Wjump-misses-init -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wswitch-enum -Wswitch-default -Wduplicated-cond -Wduplicated-branches -Wlogical-op -Wrestrict -Wnull-dereference -Wdouble-promotion -Wno-error=unused-parameter -Wno-error=missing-field-initializers
WARN_CXXFLAGS = -fno-strict-aliasing -Wall -Wextra -Wundef -Wwrite-strings -Wpointer-arith -Wmissing-declarations -Wredundant-decls -Wno-unused-parameter -Wno-missing-field-initializers -Wformat=2 -Wcast-align -Wformat-nonliteral -Wformat-security -Wsign-compare -Wstrict-aliasing -Wshadow -Winline -Wpacked -Wmissing-format-attribute -Wmissing-noreturn -Winit-self -Wmissing-include-dirs -Wunused-but-set-variable -Warray-bounds -Wreturn-type -Wno-overloaded-virtual -Wswitch-enum -Wswitch-default -Wno-error=unused-parameter -Wno-error=missing-field-initializers -Wno-error=overloaded-virtual
WARN_LDFLAGS = -Wl,--no-as-needed
WARN_SCANNERFLAGS =               --warn-all                                                             
XMKMF = 
XMLTO = /usr/bin/xmlto
XSLTPROC = xsltproc
X_CFLAGS = 
X_EXTRA_LIBS = 
X_LIBS = 
X_PRE_LIBS = 
YELP_BUILD = no
abs_builddir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18
abs_srcdir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18
abs_top_builddir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18
abs_top_srcdir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18
ac_ct_AR = 
ac_ct_CC = 
ac_ct_CXX = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = /usr/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-pc-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
dbus_daemondir = ${bindir}
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = arm-openwrt-linux-gnu
host_alias = arm-openwrt-linux
host_cpu = arm
host_os = linux-gnu
host_vendor = openwrt
htmldir = ${docdir}
ifGNUmake = 
ifnGNUmake = 
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-arm_arm1176jzf-s+vfp_musl_eabi/dbus-1.13.18/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = /usr/lib
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgconfig_prefix = ${original_prefix}
prefix = /usr
program_transform_name = s&$$&&;s&^&&
psdir = ${docdir}
qchdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
runstatedir = ${localstatedir}/run
sbindir = /usr/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc
systemdsystemunitdir = 
systemduserunitdir = ${libdir}/systemd/user
target_alias = arm-openwrt-linux
top_build_prefix = 
top_builddir = .
top_srcdir = .
SUBDIRS = dbus bus tools test doc
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = dbus-1.pc
cmakeconfigdir = $(libdir)/cmake/DBus1
cmakeconfig_DATA = cmake/DBus1Config.cmake       \
                   cmake/DBus1ConfigVersion.cmake

EXTRA_DIST = \
	autogen.sh		\
	CONTRIBUTING.md		\
	dbus-1.pc.in		\
	cleanup-man-pages.sh    \
        NEWS.pre-1-0            \
        NEWS.pre-1-2		\
	README.cmake		\
	README.valgrind		\
	README.win		\
	README.wince		\
	README.cygwin		\
	README.launchd		\
	CMakeLists.txt \
	bus/CMakeLists.txt \
	dbus/CMakeLists.txt \
	doc/CMakeLists.txt \
	test/CMakeLists.txt \
	test/name-test/CMakeLists.txt \
	tools/CMakeLists.txt \
	cmake \
	$(NULL)

DISTCHECK_CONFIGURE_FLAGS = \
	--enable-xml-docs \
	--with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)

ACLOCAL_AMFLAGS = -I m4 ${ACLOCAL_FLAGS}
#GITIGNOREFILES = $(GITIGNOREFILES) $(CODE_COVERAGE_OUTPUT_FILE) $(CODE_COVERAGE_OUTPUT_DIRECTORY)
#code_coverage_v_lcov_cap = $(code_coverage_v_lcov_cap_$(V))
#code_coverage_v_lcov_cap_ = $(code_coverage_v_lcov_cap_$(AM_DEFAULT_VERBOSITY))
#code_coverage_v_lcov_cap_0 = @echo "  LCOV   --capture" $(CODE_COVERAGE_OUTPUT_FILE);
#code_coverage_v_lcov_ign = $(code_coverage_v_lcov_ign_$(V))
#code_coverage_v_lcov_ign_ = $(code_coverage_v_lcov_ign_$(AM_DEFAULT_VERBOSITY))
#code_coverage_v_lcov_ign_0 = @echo "  LCOV   --remove /tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN);
#code_coverage_v_genhtml = $(code_coverage_v_genhtml_$(V))
#code_coverage_v_genhtml_ = $(code_coverage_v_genhtml_$(AM_DEFAULT_VERBOSITY))
#code_coverage_v_genhtml_0 = @echo "  GEN   " "$(CODE_COVERAGE_OUTPUT_DIRECTORY)";
#code_coverage_quiet = $(code_coverage_quiet_$(V))
#code_coverage_quiet_ = $(code_coverage_quiet_$(AM_DEFAULT_VERBOSITY))
#code_coverage_quiet_0 = --quiet

# sanitizes the test-name: replaces with underscores: dashes and dots
#code_coverage_sanitize = $(subst -,_,$(subst .,_,$(1)))
#AM_DISTCHECK_CONFIGURE_FLAGS = $(AM_DISTCHECK_CONFIGURE_FLAGS) --disable-code-coverage
all: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/aminclude_static.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;
$(top_srcdir)/aminclude_static.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: # $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

config.h: stamp-h1
	@test -f $@ || rm -f stamp-h1
	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1

stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: # $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f config.h stamp-h1
Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bus/legacy-config/system.conf: $(top_builddir)/config.status $(top_srcdir)/bus/legacy-config/system.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bus/legacy-config/session.conf: $(top_builddir)/config.status $(top_srcdir)/bus/legacy-config/session.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bus/systemd-user/dbus.service: $(top_builddir)/config.status $(top_srcdir)/bus/systemd-user/dbus.service.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bus/systemd-user/dbus.socket: $(top_builddir)/config.status $(top_srcdir)/bus/systemd-user/dbus.socket.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bus/sysusers.d/dbus.conf: $(top_builddir)/config.status $(top_srcdir)/bus/sysusers.d/dbus.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
bus/tmpfiles.d/dbus.conf: $(top_builddir)/config.status $(top_srcdir)/bus/tmpfiles.d/dbus.conf.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
dbus-1.pc: $(top_builddir)/config.status $(srcdir)/dbus-1.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
dbus-1-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/dbus-1-uninstalled.pc.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
cmake/DBus1Config.cmake: $(top_builddir)/config.status $(top_srcdir)/cmake/DBus1Config.pkgconfig.in
	cd $(top_builddir) && $(SHELL) ./config.status $@
cmake/DBus1ConfigVersion.cmake: $(top_builddir)/config.status $(top_srcdir)/cmake/DBus1ConfigVersion.cmake.in
	cd $(top_builddir) && $(SHELL) ./config.status $@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt
install-cmakeconfigDATA: $(cmakeconfig_DATA)
	@$(NORMAL_INSTALL)
	@list='$(cmakeconfig_DATA)'; test -n "$(cmakeconfigdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(cmakeconfigdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(cmakeconfigdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(cmakeconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(cmakeconfigdir)" || exit $$?; \
	done

uninstall-cmakeconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(cmakeconfig_DATA)'; test -n "$(cmakeconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(cmakeconfigdir)'; $(am__uninstall_files_from_dir)
install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(cmakeconfigdir)" "$(DESTDIR)$(pkgconfigdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
	distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-cmakeconfigDATA install-pkgconfigDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-cmakeconfigDATA uninstall-pkgconfigDATA

.MAKE: $(am__recursive_targets) all install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
	dist-xz dist-zip dist-zstd distcheck distclean \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags distcleancheck distdir distuninstallcheck dvi \
	dvi-am html html-am info info-am install install-am \
	install-cmakeconfigDATA install-data install-data-am \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-pkgconfigDATA \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-cmakeconfigDATA uninstall-pkgconfigDATA

.PRECIOUS: Makefile


all-local: Doxyfile

update-authors:
	git shortlog -s -e | cut -c 8- | sort > AUTHORS

# Code coverage
#
# Optional:
#  - CODE_COVERAGE_DIRECTORY: Top-level directory for code coverage reporting.
#    Multiple directories may be specified, separated by whitespace.
#    (Default: $(top_builddir))
#  - CODE_COVERAGE_OUTPUT_FILE: Filename and path for the .info file generated
#    by lcov for code coverage. (Default:
#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info)
#  - CODE_COVERAGE_OUTPUT_DIRECTORY: Directory for generated code coverage
#    reports to be created. (Default:
#    $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage)
#  - CODE_COVERAGE_BRANCH_COVERAGE: Set to 1 to enforce branch coverage,
#    set to 0 to disable it and leave empty to stay with the default.
#    (Default: empty)
#  - CODE_COVERAGE_LCOV_SHOPTS_DEFAULT: Extra options shared between both lcov
#    instances. (Default: based on )
#  - CODE_COVERAGE_LCOV_SHOPTS: Extra options to shared between both lcov
#    instances. (Default: )
#  - CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH: --gcov-tool pathtogcov
#  - CODE_COVERAGE_LCOV_OPTIONS_DEFAULT: Extra options to pass to the
#    collecting lcov instance. (Default: )
#  - CODE_COVERAGE_LCOV_OPTIONS: Extra options to pass to the collecting lcov
#    instance. (Default: )
#  - CODE_COVERAGE_LCOV_RMOPTS_DEFAULT: Extra options to pass to the filtering
#    lcov instance. (Default: empty)
#  - CODE_COVERAGE_LCOV_RMOPTS: Extra options to pass to the filtering lcov
#    instance. (Default: )
#  - CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT: Extra options to pass to the
#    genhtml instance. (Default: based on )
#  - CODE_COVERAGE_GENHTML_OPTIONS: Extra options to pass to the genhtml
#    instance. (Default: )
#  - CODE_COVERAGE_IGNORE_PATTERN: Extra glob pattern of files to ignore
#
# The generated report will be titled using the $(PACKAGE_NAME) and
# $(PACKAGE_VERSION). In order to add the current git hash to the title,
# use the git-version-gen script, available online.
# Optional variables
# run only on top dir
# ifeq ($(abs_builddir), $(abs_top_builddir))
#CODE_COVERAGE_DIRECTORY ?= $(top_builddir)
#CODE_COVERAGE_OUTPUT_FILE ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage.info
#CODE_COVERAGE_OUTPUT_DIRECTORY ?= $(PACKAGE_NAME)-$(PACKAGE_VERSION)-coverage

#CODE_COVERAGE_BRANCH_COVERAGE ?=
#CODE_COVERAGE_LCOV_SHOPTS_DEFAULT ?= $(if $(CODE_COVERAGE_BRANCH_COVERAGE),--rc lcov_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
#CODE_COVERAGE_LCOV_SHOPTS ?= $(CODE_COVERAGE_LCOV_SHOPTS_DEFAULT)
#CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH ?= --gcov-tool "$(GCOV)"
#CODE_COVERAGE_LCOV_OPTIONS_DEFAULT ?= $(CODE_COVERAGE_LCOV_OPTIONS_GCOVPATH)
#CODE_COVERAGE_LCOV_OPTIONS ?= $(CODE_COVERAGE_LCOV_OPTIONS_DEFAULT)
#CODE_COVERAGE_LCOV_RMOPTS_DEFAULT ?=
#CODE_COVERAGE_LCOV_RMOPTS ?= $(CODE_COVERAGE_LCOV_RMOPTS_DEFAULT)
#CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT ?=$(if $(CODE_COVERAGE_BRANCH_COVERAGE),--rc genhtml_branch_coverage=$(CODE_COVERAGE_BRANCH_COVERAGE))
#CODE_COVERAGE_GENHTML_OPTIONS ?= $(CODE_COVERAGE_GENHTML_OPTIONS_DEFAULT)
#CODE_COVERAGE_IGNORE_PATTERN ?=

# Use recursive makes in order to ignore errors during check
#check-code-coverage:
#	-$(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) -k check
#	$(AM_V_at)$(MAKE) $(AM_MAKEFLAGS) code-coverage-capture

# Capture code coverage data
#code-coverage-capture: code-coverage-capture-hook
#	$(code_coverage_v_lcov_cap)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --capture --output-file "$(CODE_COVERAGE_OUTPUT_FILE).tmp" --test-name "$(call code_coverage_sanitize,$(PACKAGE_NAME)-$(PACKAGE_VERSION))" --no-checksum --compat-libtool $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_OPTIONS)
#	$(code_coverage_v_lcov_ign)$(LCOV) $(code_coverage_quiet) $(addprefix --directory ,$(CODE_COVERAGE_DIRECTORY)) --remove "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "/tmp/*" $(CODE_COVERAGE_IGNORE_PATTERN) --output-file "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_LCOV_SHOPTS) $(CODE_COVERAGE_LCOV_RMOPTS)
#	-@rm -f "$(CODE_COVERAGE_OUTPUT_FILE).tmp"
#	$(code_coverage_v_genhtml)LANG=C $(GENHTML) $(code_coverage_quiet) $(addprefix --prefix ,$(CODE_COVERAGE_DIRECTORY)) --output-directory "$(CODE_COVERAGE_OUTPUT_DIRECTORY)" --title "$(PACKAGE_NAME)-$(PACKAGE_VERSION) Code Coverage" --legend --show-details "$(CODE_COVERAGE_OUTPUT_FILE)" $(CODE_COVERAGE_GENHTML_OPTIONS)
#	@echo "file://$(abs_builddir)/$(CODE_COVERAGE_OUTPUT_DIRECTORY)/index.html"

#code-coverage-clean:
#	-$(LCOV) --directory $(top_builddir) -z
#	-rm -rf "$(CODE_COVERAGE_OUTPUT_FILE)" "$(CODE_COVERAGE_OUTPUT_FILE).tmp" "$(CODE_COVERAGE_OUTPUT_DIRECTORY)"
#	-find . \( -name "*.gcda" -o -name "*.gcno" -o -name "*.gcov" \) -delete

#code-coverage-dist-clean:
# else # ifneq ($(abs_builddir), $(abs_top_builddir))
#check-code-coverage:

#code-coverage-capture: code-coverage-capture-hook

#code-coverage-clean:

#code-coverage-dist-clean:
# endif # ifeq ($(abs_builddir), $(abs_top_builddir))
# Use recursive makes in order to ignore errors during check
check-code-coverage:
	@echo "Need to reconfigure with --enable-code-coverage"
# Capture code coverage data
code-coverage-capture: code-coverage-capture-hook
	@echo "Need to reconfigure with --enable-code-coverage"

code-coverage-clean:

code-coverage-dist-clean:

# Hook rule executed before code-coverage-capture, overridable by the user
code-coverage-capture-hook:

.PHONY: check-code-coverage code-coverage-capture code-coverage-dist-clean code-coverage-clean code-coverage-capture-hook

# Add rules for code-coverage testing, as defined by AX_CODE_COVERAGE

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: