# Makefile.in generated by automake 1.15.1 from Makefile.am.
# doc/man/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# Hey Emacs, this is -*- makefile-automake -*- file!
# vim: filetype=automake

am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/bind
pkgincludedir = $(includedir)/bind
pkglibdir = $(libdir)/bind
pkglibexecdir = $(libexecdir)/bind
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-pc-linux-gnu
host_triplet = powerpc-openwrt-linux-gnu
target_triplet = powerpc-openwrt-linux-gnu
#am__append_1 = \
#	-Wl,-flat_namespace

#am__append_2 = \
#	dnstap-read.1

#am__append_3 = \
#	named-nzd2nzf.1

#am__append_4 = \
#	manpages.stamp

subdir = doc/man
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \
	$(top_srcdir)/m4/ax_check_link_flag.m4 \
	$(top_srcdir)/m4/ax_check_openssl.m4 \
	$(top_srcdir)/m4/ax_gcc_func_attribute.m4 \
	$(top_srcdir)/m4/ax_jemalloc.m4 \
	$(top_srcdir)/m4/ax_lib_lmdb.m4 \
	$(top_srcdir)/m4/ax_perl_module.m4 \
	$(top_srcdir)/m4/ax_posix_shell.m4 \
	$(top_srcdir)/m4/ax_prog_cc_for_build.m4 \
	$(top_srcdir)/m4/ax_pthread.m4 \
	$(top_srcdir)/m4/ax_python_module.m4 \
	$(top_srcdir)/m4/ax_restore_flags.m4 \
	$(top_srcdir)/m4/ax_save_flags.m4 $(top_srcdir)/m4/ax_tls.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
	"$(DESTDIR)$(man8dir)"
man5dir = $(mandir)/man5
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
am__extra_recursive_targets = test-recursive unit-recursive \
	doc-recursive
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/Makefile.docs \
	$(top_srcdir)/Makefile.top
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/missing aclocal-1.15
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 0
AR = powerpc-openwrt-linux-musl-gcc-ar
AUTOCONF = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/missing autoconf
AUTOHEADER = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/missing autoheader
AUTOMAKE = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/missing automake-1.15
AWK = gawk
BUILD_EXEEXT = 
BUILD_OBJEXT = o
CC = powerpc-openwrt-linux-musl-gcc
CCDEPMODE = depmode=gcc3
CC_FOR_BUILD = x86_64-pc-linux-gnu-gcc
CFLAGS = -Os -pipe -mcpu=8540 -fno-caller-saves -fno-plt -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -msoft-float -fmacro-prefix-map=/mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11=bind-9.18.11 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libiconv-stub/include -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libintl-stub/include  -pthread
CFLAGS_FOR_BUILD = -g -O2
CMOCKA_CFLAGS = 
CMOCKA_LIBS = 
CPP = powerpc-openwrt-linux-musl-gcc -E
CPPFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-powerpc_8540_gcc-11.2.0_musl/usr/include -I/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-powerpc_8540_gcc-11.2.0_musl/include/fortify -I/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-powerpc_8540_gcc-11.2.0_musl/include -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libiconv-stub/include -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libintl-stub/include 
CPPFLAGS_FOR_BUILD = 
CPP_FOR_BUILD = x86_64-pc-linux-gnu-gcc -E
CURL = /usr/bin/curl
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DEVELOPER_MODE = 
DLLTOOL = dlltool
DNSTAP_CFLAGS = 
DNSTAP_LIBS = 
DOXYGEN = 
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/grep -E
EXEEXT = 
FGREP = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/grep -F
FSTRM_CAPTURE = 
FUZZ_LDFLAGS = 
FUZZ_LOG_COMPILER = 
GREP = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/grep
GSSAPI_CFLAGS = 
GSSAPI_LIBS = 
INSTALL = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JEMALLOC_CFLAGS = 
JEMALLOC_LIBS = 
JSON_C_CFLAGS = 
JSON_C_LIBS = 
KRB5_CFLAGS = 
KRB5_CONFIG = 
KRB5_LIBS = 
LATEXMK = :
LD = powerpc-openwrt-linux-musl-ld
LDFLAGS = -L/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-powerpc_8540_gcc-11.2.0_musl/usr/lib -L/mnt/gold/openwrt/openwrt_2203/staging_dir/toolchain-powerpc_8540_gcc-11.2.0_musl/lib -znow -zrelro -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libiconv-stub/lib -Wl,-rpath-link=/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libiconv-stub/lib -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libintl-stub/lib -Wl,-rpath-link=/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/libintl-stub/lib -Wl,--gc-sections,--as-needed 
LDFLAGS_FOR_BUILD = 
LIBCAP_LIBS = -lcap
LIBIDN2_CFLAGS = 
LIBIDN2_LIBS = 
LIBNGHTTP2_CFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/include 
LIBNGHTTP2_LIBS = -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib -lnghttp2 
LIBOBJS = 
LIBS = -lpthread  -latomic
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUV_CFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/include 
LIBUV_LIBS = -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib -luv -lpthread -ldl -lrt 
LIBXML2_CFLAGS = 
LIBXML2_LIBS = 
LIPO = 
LMDB_CFLAGS = 
LMDB_LIBS = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/missing makeinfo
MANIFEST_TOOL = :
MAXMINDDB_CFLAGS = 
MAXMINDDB_LIBS = 
MAXMINDDB_PREFIX = 
MKDIR_P = /bin/mkdir -p
NC = nc
NM = powerpc-openwrt-linux-musl-gcc-nm
NMEDIT = 
OBJDUMP = powerpc-openwrt-linux-musl-objdump
OBJEXT = o
OPENSSL_CFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/include 
OPENSSL_LDFLAGS = 
OPENSSL_LIBS = -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib -lssl -lcrypto 
OTOOL = 
OTOOL64 = 
PACKAGE = bind
PACKAGE_BUGREPORT = https://gitlab.isc.org/isc-projects/bind9/-/issues/new?issuable_template=Bug
PACKAGE_NAME = BIND
PACKAGE_STRING = BIND 9.18.11
PACKAGE_TARNAME = bind
PACKAGE_URL = https://www.isc.org/downloads/
PACKAGE_VERSION = 9.18.11
PATH_SEPARATOR = :
PERL = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/perl
PKG_CONFIG = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/pkg-config
PKG_CONFIG_LIBDIR = /mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/pkgconfig:/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/share/pkgconfig
PKG_CONFIG_PATH = /mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib/pkgconfig:/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/share/pkgconfig
PROTOC_C = 
PTHREAD_CC = powerpc-openwrt-linux-musl-gcc
PTHREAD_CFLAGS = -pthread
PTHREAD_CXX = powerpc-openwrt-linux-musl-g++
PTHREAD_LIBS = -lpthread
PYTEST = 
PYTHON = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = linux
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 3.1
RANLIB = powerpc-openwrt-linux-musl-gcc-ranlib
READLINE_CFLAGS = 
READLINE_LIBS = 
RELEASE_DATE = 2023-01-12
SED = /mnt/gold/openwrt/openwrt_2203/staging_dir/host/bin/sed
SET_MAKE = 
SHELL = /bin/sh
SPHINX_BUILD = :
STD_CFLAGS = -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wno-missing-field-initializers -Wformat -Wshadow -Werror=implicit-function-declaration -Werror=missing-prototypes -Werror=format-security -Werror=parentheses -Werror=implicit -Werror=strict-prototypes -Werror=vla -fno-strict-aliasing -fno-delete-null-pointer-checks -fdiagnostics-show-option
STD_CPPFLAGS = -D_FORTIFY_SOURCE=2
STD_LDFLAGS =  -Wl,--export-dynamic
STRIP = powerpc-openwrt-linux-musl-strip
TEST_CFLAGS = -Wno-vla
VERSION = 9.18.11
XELATEX = :
XSLTPROC = /usr/bin/xsltproc
ZLIB_CFLAGS = -I/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/include 
ZLIB_LIBS = -L/mnt/gold/openwrt/openwrt_2203/staging_dir/target-powerpc_8540_musl/usr/lib -lz 
abs_builddir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/doc/man
abs_srcdir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/doc/man
abs_top_builddir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11
abs_top_srcdir = /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11
ac_ct_AR = 
ac_ct_CC = 
ac_ct_CC_FOR_BUILD = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=posix -chf - "$$tardir"
am__untar = tar -xf -
ax_pthread_config = 
bindir = /usr/bin
build = x86_64-pc-linux-gnu
build_alias = x86_64-pc-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = pc
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = powerpc-openwrt-linux-gnu
host_alias = powerpc-openwrt-linux
host_cpu = powerpc
host_os = linux-gnu
host_vendor = openwrt
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = /usr/info
install_sh = ${SHELL} /mnt/gold/openwrt/openwrt_2203/build_dir/target-powerpc_8540_musl/bind-9.18.11/install-sh
libdir = ${exec_prefix}/lib
libexecdir = /usr/lib
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/bind
pkgpythondir = ${pythondir}/bind
prefix = /usr
program_transform_name = s&$$&&;s&^&&
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python3.11/site-packages
pythondir = ${prefix}/lib/python3.11/site-packages
sbindir = /usr/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = /etc/bind
target = powerpc-openwrt-linux-gnu
target_alias = powerpc-openwrt-linux
target_cpu = powerpc
target_os = linux-gnu
target_vendor = openwrt
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
ACLOCAL_AMFLAGS = -I $(top_srcdir)/m4
AM_CFLAGS = \
	$(STD_CFLAGS)

AM_CPPFLAGS = \
	$(STD_CPPFLAGS)				\
	-include $(top_builddir)/config.h	\
	-I$(srcdir)/include

AM_LDFLAGS = $(STD_LDFLAGS) $(am__append_1)
LDADD = 
LIBISC_CFLAGS = \
	-I$(top_srcdir)/include				\
	-I$(top_srcdir)/lib/isc/include			\
	-I$(top_builddir)/lib/isc/include

LIBISC_LIBS = $(top_builddir)/lib/isc/libisc.la
LIBDNS_CFLAGS = \
	-I$(top_srcdir)/lib/dns/include			\
	-I$(top_builddir)/lib/dns/include

LIBDNS_LIBS = \
	$(top_builddir)/lib/dns/libdns.la

LIBNS_CFLAGS = \
	-I$(top_srcdir)/lib/ns/include

LIBNS_LIBS = \
	$(top_builddir)/lib/ns/libns.la

LIBIRS_CFLAGS = \
	-I$(top_srcdir)/lib/irs/include

LIBIRS_LIBS = \
	$(top_builddir)/lib/irs/libirs.la

LIBISCCFG_CFLAGS = \
	-I$(top_srcdir)/lib/isccfg/include

LIBISCCFG_LIBS = \
	$(top_builddir)/lib/isccfg/libisccfg.la

LIBISCCC_CFLAGS = \
	-I$(top_srcdir)/lib/isccc/include/

LIBISCCC_LIBS = \
	$(top_builddir)/lib/isccc/libisccc.la

LIBBIND9_CFLAGS = \
	-I$(top_srcdir)/lib/bind9/include

LIBBIND9_LIBS = \
	$(top_builddir)/lib/bind9/libbind9.la

SPHINX_V = $(SPHINX_V_$(V))
SPHINX_V_ = $(SPHINX_V_$(AM_DEFAULT_VERBOSITY))
SPHINX_V_0 = -q
SPHINX_V_1 = -n
SPHINX_W = -W
AM_V_SPHINX = $(AM_V_SPHINX_$(V))
AM_V_SPHINX_ = $(AM_V_SPHINX_$(AM_DEFAULT_VERBOSITY))
AM_V_SPHINX_0 = @echo "  SPHINX   $@";
SPHINXBUILDDIR = $(builddir)/_build
LF = \n
RNDC_CONF = .. |rndc_conf| replace:: ``$(sysconfdir)/rndc.conf``
RNDC_KEY = .. |rndc_key| replace:: ``$(sysconfdir)/rndc.key``
NAMED_CONF = .. |named_conf| replace:: ``$(sysconfdir)/named.conf``
BIND_KEYS = .. |bind_keys| replace:: ``$(sysconfdir)/bind.keys``
NAMED_PID = .. |named_pid| replace:: ``$(runstatedir)/named.pid``
SESSION_KEY = .. |session_key| replace:: ``$(runstatedir)/session.key``
common_SPHINXOPTS = \
	$(SPHINX_W)			\
	-c $(srcdir)			\
	-a				\
	$(SPHINX_V)


# The "today" variable set below is not directly used in the ARM, but its value
# is implicitly inserted on the title page of the PDF file produced by Sphinx.
ALLSPHINXOPTS = \
	$(common_SPHINXOPTS)			\
	-D today="$(RELEASE_DATE)"		\
	-D rst_epilog="$$(printf "$${RST_EPILOG}")"	\
	$(SPHINXOPTS)				\
	$(srcdir)

_ = @
man_RNDC_CONF = .. |rndc_conf| replace:: ``$(_)sysconfdir$(_)/rndc.conf``
man_RNDC_KEY = .. |rndc_key| replace:: ``$(_)sysconfdir$(_)/rndc.key``
man_NAMED_CONF = .. |named_conf| replace:: ``$(_)sysconfdir$(_)/named.conf``
man_BIND_KEYS = .. |bind_keys| replace:: ``$(_)sysconfdir$(_)/bind.keys``
man_NAMED_PID = .. |named_pid| replace:: ``$(_)runstatedir$(_)/named.pid``
man_SESSION_KEY = .. |session_key| replace:: ``$(_)runstatedir$(_)/session.key``
man_SPHINXOPTS = \
	$(common_SPHINXOPTS)			\
	-D version="@""PACKAGE_VERSION@"	\
	-D today="@""RELEASE_DATE@"		\
	-D release="@""PACKAGE_VERSION@"	\
	-D rst_epilog="$$(printf "$${man_RST_EPILOG}")"	\
	$(SPHINXOPTS)				\
	$(srcdir)

AM_V_SED = $(AM_V_SED_$(V))
AM_V_SED_ = $(AM_V_SED_$(AM_DEFAULT_VERBOSITY))
AM_V_SED_0 = @echo "  SED $@";
AM_V_CFG_TEST = $(AM_V_CFG_TEST_$(V))
AM_V_CFG_TEST_ = $(AM_V_CFG_TEST_$(AM_DEFAULT_VERBOSITY))
AM_V_CFG_TEST_0 = @echo "  CFG_GEN $@";
MANPAGES_RST = \
	arpaname.rst			\
	delv.rst			\
	dig.rst				\
	ddns-confgen.rst		\
	dnssec-cds.rst			\
	dnssec-dsfromkey.rst		\
	dnssec-importkey.rst		\
	dnssec-keyfromlabel.rst		\
	dnssec-keygen.rst		\
	dnssec-revoke.rst		\
	dnssec-settime.rst		\
	dnssec-signzone.rst		\
	dnssec-verify.rst		\
	dnstap-read.rst			\
	filter-aaaa.rst			\
	filter-a.rst			\
	host.rst			\
	index.rst			\
	mdig.rst			\
	named-checkconf.rst		\
	named-checkzone.rst		\
	named-compilezone.rst		\
	named-journalprint.rst		\
	named-nzd2nzf.rst		\
	named-rrchecker.rst		\
	named.conf.rst			\
	named.rst			\
	nsec3hash.rst			\
	nslookup.rst			\
	nsupdate.rst			\
	rndc-confgen.rst		\
	rndc.conf.rst			\
	rndc.rst			\
	tsig-keygen.rst			\
	../../bin/check/named-checkconf.rst \
	../../bin/check/named-checkzone.rst \
	../../bin/check/named-compilezone.rst \
	../../bin/confgen/ddns-confgen.rst \
	../../bin/confgen/rndc-confgen.rst \
	../../bin/confgen/tsig-keygen.rst \
	../../bin/delv/delv.rst \
	../../bin/dig/dig.rst \
	../../bin/dig/host.rst \
	../../bin/dig/nslookup.rst \
	../../bin/dnssec/dnssec-cds.rst \
	../../bin/dnssec/dnssec-dsfromkey.rst \
	../../bin/dnssec/dnssec-importkey.rst \
	../../bin/dnssec/dnssec-keyfromlabel.rst \
	../../bin/dnssec/dnssec-keygen.rst \
	../../bin/dnssec/dnssec-revoke.rst \
	../../bin/dnssec/dnssec-settime.rst \
	../../bin/dnssec/dnssec-signzone.rst \
	../../bin/dnssec/dnssec-verify.rst \
	../../bin/named/named.conf.rst \
	../../bin/named/named.rst \
	../../bin/nsupdate/nsupdate.rst \
	../../bin/plugins/filter-aaaa.rst \
	../../bin/plugins/filter-a.rst \
	../../bin/rndc/rndc.conf.rst \
	../../bin/rndc/rndc.rst \
	../../bin/tools/arpaname.rst \
	../../bin/tools/dnstap-read.rst \
	../../bin/tools/mdig.rst \
	../../bin/tools/named-journalprint.rst \
	../../bin/tools/named-nzd2nzf.rst \
	../../bin/tools/named-rrchecker.rst \
	../../bin/tools/nsec3hash.rst

man_MANS = arpaname.1 ddns-confgen.8 delv.1 dig.1 host.1 mdig.1 \
	named-rrchecker.1 nslookup.1 nsupdate.1 named.conf.5 \
	rndc.conf.5 dnssec-cds.1 dnssec-dsfromkey.1 dnssec-importkey.1 \
	dnssec-keyfromlabel.1 dnssec-keygen.1 dnssec-revoke.1 \
	dnssec-settime.1 dnssec-signzone.1 dnssec-verify.1 \
	filter-aaaa.8 filter-a.8 named-checkconf.1 named-checkzone.1 \
	named-compilezone.1 named-journalprint.1 named.8 nsec3hash.1 \
	rndc-confgen.8 rndc.8 tsig-keygen.8 $(am__append_2) \
	$(am__append_3)
MANPAGES_IN = \
	$(man_MANS:=in)			\
	dnstap-read.1in			\
	named-nzd2nzf.1in

EXTRA_DIST = \
	conf.py				\
	$(MANPAGES_RST)			\
	$(MANPAGES_IN)

CLEANFILES = $(man_MANS) $(am__append_4)

#
# Build rules for pre-generated manpages
#
man_SUBST = \
	$(AM_V_SED)$(SED)					\
	  -e 's,[@]PACKAGE_VERSION@,$(PACKAGE_VERSION),'	\
	  -e 's,[@]RELEASE_DATE@,$(RELEASE_DATE),'		\
	  -e 's,[@]libdir[@],$(libdir),g'			\
	  -e 's,[@]runstatedir[@],$(runstatedir),g'		\
	  -e 's,[@]sysconfdir[@],$(sysconfdir),g'		\
	  $(srcdir)/$@in >$@

#MAINTAINERCLEANFILES = \
#	$(MANPAGES_IN)

##@dry = ; for f in x $$MAKEFLAGS; do \
##          case $$f in \
##            *=*|--*);; \
##            *n*) dry=:;; \
##          esac; \
##        done; \
##        if test -f $@; then :; else \
##          $$dry trap 'rm -rf manpages.lock manpages.stamp' 1 2 13 15; \
##          if $$dry mkdir manpages.lock 2>/dev/null; then \
##            $$dry rm -f manpages.stamp; \
##            $(MAKE) $(AM_MAKEFLAGS) manpages.stamp; \
##            $$dry rmdir manpages.lock; \
##          else \
##            while test -d manpages.lock && test -z "$$dry"; do \
##              sleep 1; \
##            done; \
##            $$dry test -f manpages.stamp; exit $$?; \
##          fi; \
##        fi

all: all-am

.SUFFIXES:
.SUFFIXES: .1 .1in .5 .5in .8 .8in
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/Makefile.top $(top_srcdir)/Makefile.docs $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/man/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;
$(top_srcdir)/Makefile.top $(top_srcdir)/Makefile.docs $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-man5: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man5dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.5[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
	done; }

uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man5dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.5[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
install-man8: $(man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(man_MANS)'; \
	test -n "$(man8dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.8[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
	done; }

uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man8dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.8[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
test-local: 
unit-local: 
doc-local: 
tags TAGS:

ctags CTAGS:

cscope cscopelist:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

doc: doc-am

doc-am: doc-local

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-man

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man: install-man1 install-man5 install-man8

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

test: test-am

test-am: test-local

uninstall-am: uninstall-man

uninstall-man: uninstall-man1 uninstall-man5 uninstall-man8

unit: unit-am

unit-am: unit-local

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-local cscopelist-am ctags-am distclean distclean-generic \
	distclean-libtool distdir doc-am doc-local dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-man1 install-man5 \
	install-man8 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am tags-am test-am test-local uninstall uninstall-am \
	uninstall-man uninstall-man1 uninstall-man5 uninstall-man8 \
	unit-am unit-local

.PRECIOUS: Makefile


export RST_EPILOG = $(RNDC_CONF)$(LF)$(RNDC_KEY)$(LF)$(NAMED_CONF)$(LF)$(BIND_KEYS)$(LF)$(NAMED_PID)$(LF)$(SESSION_KEY)

export man_RST_EPILOG = $(man_RNDC_CONF)$(LF)$(man_RNDC_KEY)$(LF)$(man_NAMED_CONF)$(LF)$(man_BIND_KEYS)$(LF)$(man_NAMED_PID)$(LF)$(man_SESSION_KEY)

.1in.1:
	$(man_SUBST)

.5in.5:
	$(man_SUBST)

.8in.8:
	$(man_SUBST)

.NOTPARALLEL: man
man: Makefile $(man_MANS)

doc-local: man

clean-local::
	-rm -rf $(SPHINXBUILDDIR)

#
# Build rules for generating pre-generated manpages
#

#
# See https://www.gnu.org/software/automake/manual/html_node/Multiple-Outputs.html
#
##manpages.stamp: $(MANPAGES_RST)
##	@rm -f manpages.tmp
##	@touch manpages.tmp
##	echo "${man_RST_EPILOG}"
##	$(AM_V_SPHINX)$(SPHINX_BUILD) -b man -d $(SPHINXBUILDDIR)/.doctrees/man $(man_SPHINXOPTS) $(SPHINXBUILDDIR)/man
##	for f in $(SPHINXBUILDDIR)/man/*; do \
##	  cp -a "$$f" "$(srcdir)/$$(basename $$f)in"; \
##	done
##	@mv -f manpages.tmp $@

##$(MANPAGES_IN): manpages.stamp

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: