/* config.h.in.  Generated from configure.in by autoheader.  */

/* Allow UNI 3.0 backwards-compatible extensions (if using UNI 3.1) */
#undef ALLOW_UNI30

/* Default config file location for atmsigd */
#undef ATMSIGD_CONF

/* Use select() instead of poll() with MPOA */
#undef BROKEN_POLL

/* If you're using a Cisco LS100 or LS7010 switch, you should add the
   following line to work around a bug in their point-to-multipoint signaling
   (it got confused when receiving a CALL PROCEEDING, so we don't send it,
   which of course makes our clearing procedure slightly non-conformant): */
#undef CISCO

/* The UNI version can be configured at run time. Dynamic is the default. Use
   the explicit version selections only in case of problems. */
#undef DYNAMIC_UNI

/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H

/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H

/* Define to 1 if you have the `mpr' library (-lmpr). */
#undef HAVE_LIBMPR

/* Define to 1 if you have the `resolv' library (-lresolv). */
#undef HAVE_LIBRESOLV

/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H

/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H

/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H

/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H

/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H

/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H

/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H

/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H

/* Define to the sub-directory in which libtool stores uninstalled libraries.
   */
#undef LT_OBJDIR

/* Use proposed MPOA 1.1 features */
#undef MPOA_1_1

/* Point to multipoint signalling support for atmsigd. */
#undef MULTIPOINT

/* Name of package */
#undef PACKAGE

/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT

/* Define to the full name of this package. */
#undef PACKAGE_NAME

/* Define to the full name and version of this package. */
#undef PACKAGE_STRING

/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME

/* Define to the home page for this package. */
#undef PACKAGE_URL

/* Define to the version of this package. */
#undef PACKAGE_VERSION

/* If using UNI40, you can also enable peak cell rate modification as
   specified in Q.2963.1 */
#undef Q2963_1

/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS

/* Some versions of the Thomson Thomflex 5000 won't do any signaling before
   they get a RESTART. Uncomment the next line to enable sending of a RESTART
   whenever SAAL comes up. Note that the RESTART ACKNOWLEDGE sent in response
   to the RESTART will yield a warning, because we don't implement the full
   RESTART state machine. */
#undef THOMFLEX

/* */
#undef UNI30

/* Note: some UNI 3.0 switches will show really strange behaviour if
   confronted with using 3.1 signaling, so be sure to test your network *very*
   carefully before permanently configuring machines to use UNI 3.1. */
#undef UNI31

/* Some partial support for UNI 4.0 can be enabled by using UNI40 */
#undef UNI40

/* Version number of package */
#undef VERSION

/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
   `char[]'. */
#undef YYTEXT_POINTER

/* */
#undef YY_USE_CONST