## Of the following Net-SNMP agent features
## NONE are supported on Net-SNMP-5.1.1 Win32 platforms
##    Process checks        "proc" config token
##    Executable scripts    "exec" config token
##    Disk checks           "disk" config token
##    Load average checks   "load" config token
##    Extensible sections   "exec" config token with shelltest
##    Pass-through control  "pass" config token

###############################################################################
#
# EXAMPLE.conf:
#   An example configuration file for configuring the ucd-snmp snmpd agent.
#
###############################################################################
#
# This file is intended to only be an example.  If, however, you want
# to use it, it should be placed in c:/usr-mingw/etc/share/snmp/snmpd.conf.
# When the snmpd agent starts up, this is where it will look for it.
#
# You might be interested in generating your own snmpd.conf file using
# the "snmpconf" program (perl script) instead.  It's a nice menu
# based interface to writing well commented configuration files.  Try it!
#
# Note: This file is automatically generated from EXAMPLE.conf.def.
# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run
# configure & make, and then make sure you read the EXAMPLE.conf file
# instead, as it will tailor itself to your configuration.

# All lines beginning with a '#' are comments and are intended for you
# to read.  All other lines are configuration commands for the agent.

#
# PLEASE: read the snmpd.conf(5) manual page as well!
#


###############################################################################
# Access Control
###############################################################################

# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
# KNOWN AT YOUR SITE.  YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.

# By far, the most common question I get about the agent is "why won't
# it work?", when really it should be "how do I configure the agent to
# allow me to access it?"
#
# By default, the agent responds to the "public" community for read
# only access, if run out of the box without any configuration file in 
# place.  The following examples show you other ways of configuring
# the agent so that you can change the community names, and give
# yourself write access as well.
#
# The following lines change the access permissions of the agent so
# that the COMMUNITY string provides read-only access to your entire
# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
# localhost (127.0.0.1, not its real ipaddress).
#
# For more information, read the FAQ as well as the snmpd.conf(5)
# manual page.

####
# First, map the community name (COMMUNITY) into a security name
# (local and mynetwork, depending on where the request is coming
# from):

#       sec.name  source          community
com2sec local     localhost       COMMUNITY
com2sec mynetwork NETWORK/24      COMMUNITY

####
# Second, map the security names into group names:

#             	sec.model  sec.name
group MyRWGroup	v1         local
group MyRWGroup	v2c        local
group MyRWGroup	usm        local
group MyROGroup v1         mynetwork
group MyROGroup v2c        mynetwork
group MyROGroup usm        mynetwork

####
# Third, create a view for us to let the groups have rights to:

#           incl/excl subtree                          mask
view all    included  .1                               80

####
# Finally, grant the 2 groups access to the 1 view with different
# write permissions:

#                context sec.model sec.level match  read   write  notif
access MyROGroup ""      any       noauth    exact  all    none   none
access MyRWGroup ""      any       noauth    exact  all    all    none

# -----------------------------------------------------------------------------


###############################################################################
# System contact information
#

# It is also possible to set the sysContact and sysLocation system
# variables through the snmpd.conf file.  **PLEASE NOTE** that setting
# the value of these objects here makes these objects READ-ONLY
# (regardless of any access control settings).  Any attempt to set the
# value of an object whose value is given here will fail with an error
# status of notWritable.

syslocation Right here, right now.
syscontact Me <me@somewhere.org>

# Example output of snmpwalk:
#   % snmpwalk -v 1 -c public localhost system
#   system.sysDescr.0 = "Windows NT 2000 SP4"
#   system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.win32
#   system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
#   system.sysContact.0 = "Me <me@somewhere.org>"
#   system.sysName.0 = "name"
#   system.sysLocation.0 = "Right here, right now."
#   system.sysServices.0 = 72


# -----------------------------------------------------------------------------

###############################################################################
# Subagent control
#

# The agent can support subagents using a number of extension mechanisms.
# From the 4.2.1 release, AgentX support is being compiled in by default.
# However, this is still experimental code, so should not be used on
# critical production systems.
#   Please see the file README.agentx for more details.
#
# If having read, marked, learnt and inwardly digested this information,
# you decide that you do wish to make use of this mechanism, simply
# uncomment the following directive.
#
#  master  agentx
#
# I repeat - this is *NOT* regarded as suitable for front-line production
# systems, though it is probably stable enough for day-to-day use.
# Probably.
#
# No refunds will be given.


###############################################################################
# Further Information
#
#  See the snmpd.conf manual page, and the output of "snmpd -H".
#  MUCH more can be done with the snmpd.conf than is shown as an
#  example here.