Relocations
===========

BFD maintains relocations in much the same way it maintains symbols: they are left alone until required, then read in en-masse and translated into an internal form.  A common routine bfd_perform_relocation acts upon the canonical form to do the fixup.

Relocations are maintained on a per section basis, while symbols are maintained on a per BFD basis.

All that a back end has to do to fit the BFD interface is to create a struct reloc_cache_entry for each relocation in a particular section, and fill in the right bits of the structures.

typedef arelent
---------------

This is the structure of a relocation entry:

     typedef enum bfd_reloc_status
     {
       /* No errors detected.  Note - the value 2 is used so that it
          will not be mistaken for the boolean TRUE or FALSE values.  */
       bfd_reloc_ok = 2,

       /* The relocation was performed, but there was an overflow.  */
       bfd_reloc_overflow,

       /* The address to relocate was not within the section supplied.  */
       bfd_reloc_outofrange,

       /* Used by special functions.  */
       bfd_reloc_continue,

       /* Unsupported relocation size requested.  */
       bfd_reloc_notsupported,

       /* Unused.  */
       bfd_reloc_other,

       /* The symbol to relocate against was undefined.  */
       bfd_reloc_undefined,

       /* The relocation was performed, but may not be ok.  If this type is
          returned, the error_message argument to bfd_perform_relocation
          will be set.  */
       bfd_reloc_dangerous
      }
      bfd_reloc_status_type;

     typedef const struct reloc_howto_struct reloc_howto_type;

     typedef struct reloc_cache_entry
     {
       /* A pointer into the canonical table of pointers.  */
       struct bfd_symbol **sym_ptr_ptr;

       /* offset in section.  */
       bfd_size_type address;

       /* addend for relocation value.  */
       bfd_vma addend;

       /* Pointer to how to perform the required relocation.  */
       reloc_howto_type *howto;

     }
     arelent;

Description

Here is a description of each of the fields within an arelent:

  * sym_ptr_ptr

The symbol table pointer points to a pointer to the symbol associated with the relocation request.  It is the pointer into the table returned by the back end's canonicalize_symtab action. See Symbols. The symbol is referenced through a pointer to a pointer so that tools like the linker can fix up all the symbols of the same name by modifying only one pointer. The relocation routine looks in the symbol and uses the base of the section the symbol is attached to and the value of the symbol as the initial relocation offset. If the symbol pointer is zero, then the section provided is looked up.

  * address

The address field gives the offset in bytes from the base of the section data which owns the relocation record to the first byte of relocatable information. The actual data relocated will be relative to this point; for example, a relocation type which modifies the bottom two bytes of a four byte word would not touch the first byte pointed to in a big endian world.

  * addend

The addend is a value provided by the back end to be added (!) to the relocation offset. Its interpretation is dependent upon the howto. For example, on the 68k the code:

             char foo[];
             main()
                     {
                     return foo[0x12345678];
                     }

Could be compiled into:

             linkw fp,#-4
             moveb @#12345678,d0
             extbl d0
             unlk fp
             rts

This could create a reloc pointing to foo, but leave the offset in the data, something like:

     RELOCATION RECORDS FOR [.text]:
     offset   type      value
     00000006 32        _foo

     00000000 4e56 fffc          ; linkw fp,#-4
     00000004 1039 1234 5678     ; moveb @#12345678,d0
     0000000a 49c0               ; extbl d0
     0000000c 4e5e               ; unlk fp
     0000000e 4e75               ; rts

Using coff and an 88k, some instructions don't have enough space in them to represent the full address range, and pointers have to be loaded in two parts. So you'd get something like:

             or.u     r13,r0,hi16(_foo+0x12345678)
             ld.b     r2,r13,lo16(_foo+0x12345678)
             jmp      r1

This should create two relocs, both pointing to _foo, and with 0x12340000 in their addend field. The data would consist of:

     RELOCATION RECORDS FOR [.text]:
     offset   type      value
     00000002 HVRT16    _foo+0x12340000
     00000006 LVRT16    _foo+0x12340000

     00000000 5da05678           ; or.u r13,r0,0x5678
     00000004 1c4d5678           ; ld.b r2,r13,0x5678
     00000008 f400c001           ; jmp r1

The relocation routine digs out the value from the data, adds it to the addend to get the original offset, and then adds the value of _foo. Note that all 32 bits have to be kept around somewhere, to cope with carry from bit 15 to bit 16.

One further example is the sparc and the a.out format. The sparc has a similar problem to the 88k, in that some instructions don't have room for an entire offset, but on the sparc the parts are created in odd sized lumps. The designers of the a.out format chose to not use the data within the section for storing part of the offset; all the offset is kept within the reloc. Anything in the data should be ignored.

             save %sp,-112,%sp
             sethi %hi(_foo+0x12345678),%g2
             ldsb [%g2+%lo(_foo+0x12345678)],%i0
             ret
             restore

Both relocs contain a pointer to foo, and the offsets contain junk.

     RELOCATION RECORDS FOR [.text]:
     offset   type      value
     00000004 HI22      _foo+0x12345678
     00000008 LO10      _foo+0x12345678

     00000000 9de3bf90     ; save %sp,-112,%sp
     00000004 05000000     ; sethi %hi(_foo+0),%g2
     00000008 f048a000     ; ldsb [%g2+%lo(_foo+0)],%i0
     0000000c 81c7e008     ; ret
     00000010 81e80000     ; restore

  * howto

The howto field can be imagined as a relocation instruction. It is a pointer to a structure which contains information on what to do with all of the other information in the reloc record and data section. A back end would normally have a relocation instruction set and turn relocations into pointers to the correct structure on input - but it would be possible to create each howto field on demand.

enum complain_overflow
......................

Indicates what sort of overflow checking should be done when performing a relocation.

     enum complain_overflow
     {
       /* Do not complain on overflow.  */
       complain_overflow_dont,

       /* Complain if the value overflows when considered as a signed
          number one bit larger than the field.  ie. A bitfield of N bits
          is allowed to represent -2**n to 2**n-1.  */
       complain_overflow_bitfield,

       /* Complain if the value overflows when considered as a signed
          number.  */
       complain_overflow_signed,

       /* Complain if the value overflows when considered as an
          unsigned number.  */
       complain_overflow_unsigned
     };

reloc_howto_type
................

The reloc_howto_type is a structure which contains all the information that libbfd needs to know to tie up a back end's data.

     struct reloc_howto_struct
     {
       /* The type field has mainly a documentary use - the back end can
          do what it wants with it, though normally the back end's idea of
          an external reloc number is stored in this field.  */
       unsigned int type;

       /* The encoded size of the item to be relocated.  This is *not* a
          power-of-two measure.  Use bfd_get_reloc_size to find the size
          of the item in bytes.  */
       unsigned int size:3;

       /* The number of bits in the field to be relocated.  This is used
          when doing overflow checking.  */
       unsigned int bitsize:7;

       /* The value the final relocation is shifted right by.  This drops
          unwanted data from the relocation.  */
       unsigned int rightshift:6;

       /* The bit position of the reloc value in the destination.
          The relocated value is left shifted by this amount.  */
       unsigned int bitpos:6;

       /* What type of overflow error should be checked for when
          relocating.  */
       ENUM_BITFIELD (complain_overflow) complain_on_overflow:2;

       /* The relocation value should be negated before applying.  */
       unsigned int negate:1;

       /* The relocation is relative to the item being relocated.  */
       unsigned int pc_relative:1;

       /* Some formats record a relocation addend in the section contents
          rather than with the relocation.  For ELF formats this is the
          distinction between USE_REL and USE_RELA (though the code checks
          for USE_REL == 1/0).  The value of this field is TRUE if the
          addend is recorded with the section contents; when performing a
          partial link (ld -r) the section contents (the data) will be
          modified.  The value of this field is FALSE if addends are
          recorded with the relocation (in arelent.addend); when performing
          a partial link the relocation will be modified.
          All relocations for all ELF USE_RELA targets should set this field
          to FALSE (values of TRUE should be looked on with suspicion).
          However, the converse is not true: not all relocations of all ELF
          USE_REL targets set this field to TRUE.  Why this is so is peculiar
          to each particular target.  For relocs that aren't used in partial
          links (e.g. GOT stuff) it doesn't matter what this is set to.  */
       unsigned int partial_inplace:1;

       /* When some formats create PC relative instructions, they leave
          the value of the pc of the place being relocated in the offset
          slot of the instruction, so that a PC relative relocation can
          be made just by adding in an ordinary offset (e.g., sun3 a.out).
          Some formats leave the displacement part of an instruction
          empty (e.g., ELF); this flag signals the fact.  */
       unsigned int pcrel_offset:1;

       /* src_mask selects the part of the instruction (or data) to be used
          in the relocation sum.  If the target relocations don't have an
          addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
          dst_mask to extract the addend from the section contents.  If
          relocations do have an addend in the reloc, eg. ELF USE_RELA, this
          field should normally be zero.  Non-zero values for ELF USE_RELA
          targets should be viewed with suspicion as normally the value in
          the dst_mask part of the section contents should be ignored.  */
       bfd_vma src_mask;

       /* dst_mask selects which parts of the instruction (or data) are
          replaced with a relocated value.  */
       bfd_vma dst_mask;

       /* If this field is non null, then the supplied function is
          called rather than the normal function.  This allows really
          strange relocation methods to be accommodated.  */
       bfd_reloc_status_type (*special_function)
         (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
          bfd *, char **);

       /* The textual name of the relocation type.  */
       const char *name;
     };

The HOWTO Macro
...............

Description

The HOWTO macro fills in a reloc_howto_type (a typedef for const struct reloc_howto_struct).

     #define HOWTO(type, right, size, bits, pcrel, left, ovf, func, name,   \
                   inplace, src_mask, dst_mask, pcrel_off)                  \
       { (unsigned) type, size < 0 ? -size : size, bits, right, left, ovf,  \
         size < 0, pcrel, inplace, pcrel_off, src_mask, dst_mask, func, name }

Description

This is used to fill in an empty howto entry in an array.

     #define EMPTY_HOWTO(C) \
       HOWTO ((C), 0, 0, 0, false, 0, complain_overflow_dont, NULL, \
              NULL, false, 0, 0, false)

bfd_get_reloc_size
..................

Synopsis

     unsigned int bfd_get_reloc_size (reloc_howto_type *);

Description

For a reloc_howto_type that operates on a fixed number of bytes, this returns the number of bytes operated on.

arelent_chain
.............

Description

How relocs are tied together in an asection:

     typedef struct relent_chain
     {
       arelent relent;
       struct relent_chain *next;
     }
     arelent_chain;

bfd_check_overflow
..................

Synopsis

     bfd_reloc_status_type bfd_check_overflow
        (enum complain_overflow how,
         unsigned int bitsize,
         unsigned int rightshift,
         unsigned int addrsize,
         bfd_vma relocation);

Description

Perform overflow checking on RELOCATION which has BITSIZE significant bits and will be shifted right by RIGHTSHIFT bits, on a machine with addresses containing ADDRSIZE significant bits.  The result is either of bfd_reloc_ok or bfd_reloc_overflow.

bfd_reloc_offset_in_range
.........................

Synopsis

     bool bfd_reloc_offset_in_range
        (reloc_howto_type *howto,
         bfd *abfd,
         asection *section,
         bfd_size_type offset);

Description

Returns TRUE if the reloc described by HOWTO can be applied at OFFSET octets in SECTION.

bfd_perform_relocation
......................

Synopsis

     bfd_reloc_status_type bfd_perform_relocation
        (bfd *abfd,
         arelent *reloc_entry,
         void *data,
         asection *input_section,
         bfd *output_bfd,
         char **error_message);

Description

If OUTPUT_BFD is supplied to this function, the generated image will be relocatable; the relocations are copied to the output file after they have been changed to reflect the new state of the world. There are two ways of reflecting the results of partial linkage in an output file: by modifying the output data in place, and by modifying the relocation record.  Some native formats (e.g., basic a.out and basic coff) have no way of specifying an addend in the relocation type, so the addend has to go in the output data. This is no big deal since in these formats the output data slot will always be big enough for the addend. Complex reloc types with addends were invented to solve just this problem. The ERROR_MESSAGE argument is set to an error message if this return bfd_reloc_dangerous.

bfd_install_relocation
......................

Synopsis

     bfd_reloc_status_type bfd_install_relocation
        (bfd *abfd,
         arelent *reloc_entry,
         void *data, bfd_vma data_start,
         asection *input_section,
         char **error_message);

Description

This looks remarkably like bfd_perform_relocation, except it does not expect that the section contents have been filled in. I.e., it's suitable for use when creating, rather than applying a relocation.

For now, this function should be considered reserved for the assembler.

The howto manager
-----------------

When an application wants to create a relocation, but doesn't know what the target machine might call it, it can find out by using this bit of code.

bfd_reloc_code_type
...................

Description

The insides of a reloc code.  The idea is that, eventually, there will be one enumerator for every type of relocation we ever do. Pass one of these values to bfd_reloc_type_lookup, and it'll return a howto pointer.

This does mean that the application must determine the correct enumerator value; you can't get a howto pointer from a random set of attributes.

Here are the possible values for enum bfd_reloc_code_real:

 -- BFD_RELOC_64:
 -- BFD_RELOC_32:
 -- BFD_RELOC_26:
 -- BFD_RELOC_24:
 -- BFD_RELOC_16:
 -- BFD_RELOC_14:
 -- BFD_RELOC_8:
     Basic absolute relocations of N bits.

 -- BFD_RELOC_64_PCREL:
 -- BFD_RELOC_32_PCREL:
 -- BFD_RELOC_24_PCREL:
 -- BFD_RELOC_16_PCREL:
 -- BFD_RELOC_12_PCREL:
 -- BFD_RELOC_8_PCREL:
     PC-relative relocations.  Sometimes these are relative to the address of the relocation itself; sometimes they are relative to the start of the section containing the relocation.  It depends on the specific target.

 -- BFD_RELOC_32_SECREL:
     Section relative relocations.  Some targets need this for DWARF2.

 -- BFD_RELOC_32_GOT_PCREL:
 -- BFD_RELOC_16_GOT_PCREL:
 -- BFD_RELOC_8_GOT_PCREL:
 -- BFD_RELOC_32_GOTOFF:
 -- BFD_RELOC_16_GOTOFF:
 -- BFD_RELOC_LO16_GOTOFF:
 -- BFD_RELOC_HI16_GOTOFF:
 -- BFD_RELOC_HI16_S_GOTOFF:
 -- BFD_RELOC_8_GOTOFF:
 -- BFD_RELOC_64_PLT_PCREL:
 -- BFD_RELOC_32_PLT_PCREL:
 -- BFD_RELOC_24_PLT_PCREL:
 -- BFD_RELOC_16_PLT_PCREL:
 -- BFD_RELOC_8_PLT_PCREL:
 -- BFD_RELOC_64_PLTOFF:
 -- BFD_RELOC_32_PLTOFF:
 -- BFD_RELOC_16_PLTOFF:
 -- BFD_RELOC_LO16_PLTOFF:
 -- BFD_RELOC_HI16_PLTOFF:
 -- BFD_RELOC_HI16_S_PLTOFF:
 -- BFD_RELOC_8_PLTOFF:
     For ELF.

 -- BFD_RELOC_SIZE32:
 -- BFD_RELOC_SIZE64:
     Size relocations.

 -- BFD_RELOC_68K_GLOB_DAT:
 -- BFD_RELOC_68K_JMP_SLOT:
 -- BFD_RELOC_68K_RELATIVE:
 -- BFD_RELOC_68K_TLS_GD32:
 -- BFD_RELOC_68K_TLS_GD16:
 -- BFD_RELOC_68K_TLS_GD8:
 -- BFD_RELOC_68K_TLS_LDM32:
 -- BFD_RELOC_68K_TLS_LDM16:
 -- BFD_RELOC_68K_TLS_LDM8:
 -- BFD_RELOC_68K_TLS_LDO32:
 -- BFD_RELOC_68K_TLS_LDO16:
 -- BFD_RELOC_68K_TLS_LDO8:
 -- BFD_RELOC_68K_TLS_IE32:
 -- BFD_RELOC_68K_TLS_IE16:
 -- BFD_RELOC_68K_TLS_IE8:
 -- BFD_RELOC_68K_TLS_LE32:
 -- BFD_RELOC_68K_TLS_LE16:
 -- BFD_RELOC_68K_TLS_LE8:
     Relocations used by 68K ELF.

 -- BFD_RELOC_32_BASEREL:
 -- BFD_RELOC_16_BASEREL:
 -- BFD_RELOC_LO16_BASEREL:
 -- BFD_RELOC_HI16_BASEREL:
 -- BFD_RELOC_HI16_S_BASEREL:
 -- BFD_RELOC_8_BASEREL:
 -- BFD_RELOC_RVA:
     Linkage-table relative.

 -- BFD_RELOC_8_FFnn:
     Absolute 8-bit relocation, but used to form an address like 0xFFnn.

 -- BFD_RELOC_32_PCREL_S2:
 -- BFD_RELOC_16_PCREL_S2:
 -- BFD_RELOC_23_PCREL_S2:
     These PC-relative relocations are stored as word displacements -- i.e., byte displacements shifted right two bits.  The 30-bit word displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the SPARC.  (SPARC tools generally refer to this as <<WDISP30>>.)  The signed 16-bit displacement is used on the MIPS, and the 23-bit displacement is used on the Alpha.

 -- BFD_RELOC_HI22:
 -- BFD_RELOC_LO10:
     High 22 bits and low 10 bits of 32-bit value, placed into lower bits of the target word.  These are used on the SPARC.

 -- BFD_RELOC_GPREL16:
 -- BFD_RELOC_GPREL32:
     For systems that allocate a Global Pointer register, these are displacements off that register.  These relocation types are handled specially, because the value the register will have is decided relatively late.

 -- BFD_RELOC_NONE:
 -- BFD_RELOC_SPARC_WDISP22:
 -- BFD_RELOC_SPARC22:
 -- BFD_RELOC_SPARC13:
 -- BFD_RELOC_SPARC_GOT10:
 -- BFD_RELOC_SPARC_GOT13:
 -- BFD_RELOC_SPARC_GOT22:
 -- BFD_RELOC_SPARC_PC10:
 -- BFD_RELOC_SPARC_PC22:
 -- BFD_RELOC_SPARC_WPLT30:
 -- BFD_RELOC_SPARC_COPY:
 -- BFD_RELOC_SPARC_GLOB_DAT:
 -- BFD_RELOC_SPARC_JMP_SLOT:
 -- BFD_RELOC_SPARC_RELATIVE:
 -- BFD_RELOC_SPARC_UA16:
 -- BFD_RELOC_SPARC_UA32:
 -- BFD_RELOC_SPARC_UA64:
 -- BFD_RELOC_SPARC_GOTDATA_HIX22:
 -- BFD_RELOC_SPARC_GOTDATA_LOX10:
 -- BFD_RELOC_SPARC_GOTDATA_OP_HIX22:
 -- BFD_RELOC_SPARC_GOTDATA_OP_LOX10:
 -- BFD_RELOC_SPARC_GOTDATA_OP:
 -- BFD_RELOC_SPARC_JMP_IREL:
 -- BFD_RELOC_SPARC_IRELATIVE:
     SPARC ELF relocations.  There is probably some overlap with other relocation types already defined.

 -- BFD_RELOC_SPARC_BASE13:
 -- BFD_RELOC_SPARC_BASE22:
     I think these are specific to SPARC a.out (e.g., Sun 4).

 -- BFD_RELOC_SPARC_64:
 -- BFD_RELOC_SPARC_10:
 -- BFD_RELOC_SPARC_11:
 -- BFD_RELOC_SPARC_OLO10:
 -- BFD_RELOC_SPARC_HH22:
 -- BFD_RELOC_SPARC_HM10:
 -- BFD_RELOC_SPARC_LM22:
 -- BFD_RELOC_SPARC_PC_HH22:
 -- BFD_RELOC_SPARC_PC_HM10:
 -- BFD_RELOC_SPARC_PC_LM22:
 -- BFD_RELOC_SPARC_WDISP16:
 -- BFD_RELOC_SPARC_WDISP19:
 -- BFD_RELOC_SPARC_7:
 -- BFD_RELOC_SPARC_6:
 -- BFD_RELOC_SPARC_5:
 -- BFD_RELOC_SPARC_DISP64:
 -- BFD_RELOC_SPARC_PLT32:
 -- BFD_RELOC_SPARC_PLT64:
 -- BFD_RELOC_SPARC_HIX22:
 -- BFD_RELOC_SPARC_LOX10:
 -- BFD_RELOC_SPARC_H44:
 -- BFD_RELOC_SPARC_M44:
 -- BFD_RELOC_SPARC_L44:
 -- BFD_RELOC_SPARC_REGISTER:
 -- BFD_RELOC_SPARC_H34:
 -- BFD_RELOC_SPARC_SIZE32:
 -- BFD_RELOC_SPARC_SIZE64:
 -- BFD_RELOC_SPARC_WDISP10:
     SPARC64 relocations

 -- BFD_RELOC_SPARC_REV32:
     SPARC little endian relocation

 -- BFD_RELOC_SPARC_TLS_GD_HI22:
 -- BFD_RELOC_SPARC_TLS_GD_LO10:
 -- BFD_RELOC_SPARC_TLS_GD_ADD:
 -- BFD_RELOC_SPARC_TLS_GD_CALL:
 -- BFD_RELOC_SPARC_TLS_LDM_HI22:
 -- BFD_RELOC_SPARC_TLS_LDM_LO10:
 -- BFD_RELOC_SPARC_TLS_LDM_ADD:
 -- BFD_RELOC_SPARC_TLS_LDM_CALL:
 -- BFD_RELOC_SPARC_TLS_LDO_HIX22:
 -- BFD_RELOC_SPARC_TLS_LDO_LOX10:
 -- BFD_RELOC_SPARC_TLS_LDO_ADD:
 -- BFD_RELOC_SPARC_TLS_IE_HI22:
 -- BFD_RELOC_SPARC_TLS_IE_LO10:
 -- BFD_RELOC_SPARC_TLS_IE_LD:
 -- BFD_RELOC_SPARC_TLS_IE_LDX:
 -- BFD_RELOC_SPARC_TLS_IE_ADD:
 -- BFD_RELOC_SPARC_TLS_LE_HIX22:
 -- BFD_RELOC_SPARC_TLS_LE_LOX10:
 -- BFD_RELOC_SPARC_TLS_DTPMOD32:
 -- BFD_RELOC_SPARC_TLS_DTPMOD64:
 -- BFD_RELOC_SPARC_TLS_DTPOFF32:
 -- BFD_RELOC_SPARC_TLS_DTPOFF64:
 -- BFD_RELOC_SPARC_TLS_TPOFF32:
 -- BFD_RELOC_SPARC_TLS_TPOFF64:
     SPARC TLS relocations

 -- BFD_RELOC_SPU_IMM7:
 -- BFD_RELOC_SPU_IMM8:
 -- BFD_RELOC_SPU_IMM10:
 -- BFD_RELOC_SPU_IMM10W:
 -- BFD_RELOC_SPU_IMM16:
 -- BFD_RELOC_SPU_IMM16W:
 -- BFD_RELOC_SPU_IMM18:
 -- BFD_RELOC_SPU_PCREL9a:
 -- BFD_RELOC_SPU_PCREL9b:
 -- BFD_RELOC_SPU_PCREL16:
 -- BFD_RELOC_SPU_LO16:
 -- BFD_RELOC_SPU_HI16:
 -- BFD_RELOC_SPU_PPU32:
 -- BFD_RELOC_SPU_PPU64:
 -- BFD_RELOC_SPU_ADD_PIC:
     SPU Relocations.

 -- BFD_RELOC_ALPHA_GPDISP_HI16:
     Alpha ECOFF and ELF relocations.  Some of these treat the symbol or "addend" in some special way. For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when writing; when reading, it will be the absolute section symbol.  The addend is the displacement in bytes of the "lda" instruction from the "ldah" instruction (which is at the address of this reloc).

 -- BFD_RELOC_ALPHA_GPDISP_LO16:
     For GPDISP_LO16 ("ignore") relocations, the symbol is handled as with GPDISP_HI16 relocs.  The addend is ignored when writing the relocations out, and is filled in with the file's GP value on reading, for convenience.

 -- BFD_RELOC_ALPHA_GPDISP:
     The ELF GPDISP relocation is exactly the same as the GPDISP_HI16 relocation except that there is no accompanying GPDISP_LO16 relocation.

 -- BFD_RELOC_ALPHA_LITERAL:
 -- BFD_RELOC_ALPHA_ELF_LITERAL:
 -- BFD_RELOC_ALPHA_LITUSE:
     The Alpha LITERAL/LITUSE relocs are produced by a symbol reference; the assembler turns it into a LDQ instruction to load the address of the symbol, and then fills in a register in the real instruction.

     The LITERAL reloc, at the LDQ instruction, refers to the .lita section symbol.  The addend is ignored when writing, but is filled in with the file's GP value on reading, for convenience, as with the GPDISP_LO16 reloc.

     The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16. It should refer to the symbol to be referenced, as with 16_GOTOFF, but it generates output not based on the position within the .got section, but relative to the GP value chosen for the file during the final link stage.

     The LITUSE reloc, on the instruction using the loaded address, gives information to the linker that it might be able to use to optimize away some literal section references.  The symbol is ignored (read as the absolute section symbol), and the "addend" indicates the type of instruction using the register: 1 - "memory" fmt insn 2 - byte-manipulation (byte offset reg) 3 - jsr (target of branch)

 -- BFD_RELOC_ALPHA_HINT:
     The HINT relocation indicates a value that should be filled into the "hint" field of a jmp/jsr/ret instruction, for possible branch- prediction logic which may be provided on some processors.

 -- BFD_RELOC_ALPHA_LINKAGE:
     The LINKAGE relocation outputs a linkage pair in the object file, which is filled by the linker.

 -- BFD_RELOC_ALPHA_CODEADDR:
     The CODEADDR relocation outputs a STO_CA in the object file, which is filled by the linker.

 -- BFD_RELOC_ALPHA_GPREL_HI16:
 -- BFD_RELOC_ALPHA_GPREL_LO16:
     The GPREL_HI/LO relocations together form a 32-bit offset from the GP register.

 -- BFD_RELOC_ALPHA_BRSGP:
     Like BFD_RELOC_23_PCREL_S2, except that the source and target must share a common GP, and the target address is adjusted for STO_ALPHA_STD_GPLOAD.

 -- BFD_RELOC_ALPHA_NOP:
     The NOP relocation outputs a NOP if the longword displacement between two procedure entry points is < 2^21.

 -- BFD_RELOC_ALPHA_BSR:
     The BSR relocation outputs a BSR if the longword displacement between two procedure entry points is < 2^21.

 -- BFD_RELOC_ALPHA_LDA:
     The LDA relocation outputs a LDA if the longword displacement between two procedure entry points is < 2^16.

 -- BFD_RELOC_ALPHA_BOH:
     The BOH relocation outputs a BSR if the longword displacement between two procedure entry points is < 2^21, or else a hint.

 -- BFD_RELOC_ALPHA_TLSGD:
 -- BFD_RELOC_ALPHA_TLSLDM:
 -- BFD_RELOC_ALPHA_DTPMOD64:
 -- BFD_RELOC_ALPHA_GOTDTPREL16:
 -- BFD_RELOC_ALPHA_DTPREL64:
 -- BFD_RELOC_ALPHA_DTPREL_HI16:
 -- BFD_RELOC_ALPHA_DTPREL_LO16:
 -- BFD_RELOC_ALPHA_DTPREL16:
 -- BFD_RELOC_ALPHA_GOTTPREL16:
 -- BFD_RELOC_ALPHA_TPREL64:
 -- BFD_RELOC_ALPHA_TPREL_HI16:
 -- BFD_RELOC_ALPHA_TPREL_LO16:
 -- BFD_RELOC_ALPHA_TPREL16:
     Alpha thread-local storage relocations.

 -- BFD_RELOC_MIPS_JMP:
 -- BFD_RELOC_MICROMIPS_JMP:
     The MIPS jump instruction.

 -- BFD_RELOC_MIPS16_JMP:
     The MIPS16 jump instruction.

 -- BFD_RELOC_MIPS16_GPREL:
     MIPS16 GP relative reloc.

 -- BFD_RELOC_HI16:
     High 16 bits of 32-bit value; simple reloc.

 -- BFD_RELOC_HI16_S:
     High 16 bits of 32-bit value but the low 16 bits will be sign extended and added to form the final result.  If the low 16 bits form a negative number, we need to add one to the high value to compensate for the borrow when the low bits are added.

 -- BFD_RELOC_LO16:
     Low 16 bits.

 -- BFD_RELOC_HI16_PCREL:
     High 16 bits of 32-bit pc-relative value

 -- BFD_RELOC_HI16_S_PCREL:
     High 16 bits of 32-bit pc-relative value, adjusted

 -- BFD_RELOC_LO16_PCREL:
     Low 16 bits of pc-relative value

 -- BFD_RELOC_MIPS16_GOT16:
 -- BFD_RELOC_MIPS16_CALL16:
     Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of 16-bit immediate fields

 -- BFD_RELOC_MIPS16_HI16:
     MIPS16 high 16 bits of 32-bit value.

 -- BFD_RELOC_MIPS16_HI16_S:
     MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign extended and added to form the final result.  If the low 16 bits form a negative number, we need to add one to the high value to compensate for the borrow when the low bits are added.

 -- BFD_RELOC_MIPS16_LO16:
     MIPS16 low 16 bits.

 -- BFD_RELOC_MIPS16_TLS_GD:
 -- BFD_RELOC_MIPS16_TLS_LDM:
 -- BFD_RELOC_MIPS16_TLS_DTPREL_HI16:
 -- BFD_RELOC_MIPS16_TLS_DTPREL_LO16:
 -- BFD_RELOC_MIPS16_TLS_GOTTPREL:
 -- BFD_RELOC_MIPS16_TLS_TPREL_HI16:
 -- BFD_RELOC_MIPS16_TLS_TPREL_LO16:
     MIPS16 TLS relocations

 -- BFD_RELOC_MIPS_LITERAL:
 -- BFD_RELOC_MICROMIPS_LITERAL:
     Relocation against a MIPS literal section.

 -- BFD_RELOC_MICROMIPS_7_PCREL_S1:
 -- BFD_RELOC_MICROMIPS_10_PCREL_S1:
 -- BFD_RELOC_MICROMIPS_16_PCREL_S1:
     microMIPS PC-relative relocations.

 -- BFD_RELOC_MIPS16_16_PCREL_S1:
     MIPS16 PC-relative relocation.

 -- BFD_RELOC_MIPS_21_PCREL_S2:
 -- BFD_RELOC_MIPS_26_PCREL_S2:
 -- BFD_RELOC_MIPS_18_PCREL_S3:
 -- BFD_RELOC_MIPS_19_PCREL_S2:
     MIPS PC-relative relocations.

 -- BFD_RELOC_MICROMIPS_GPREL16:
 -- BFD_RELOC_MICROMIPS_HI16:
 -- BFD_RELOC_MICROMIPS_HI16_S:
 -- BFD_RELOC_MICROMIPS_LO16:
     microMIPS versions of generic BFD relocs.

 -- BFD_RELOC_MIPS_GOT16:
 -- BFD_RELOC_MICROMIPS_GOT16:
 -- BFD_RELOC_MIPS_CALL16:
 -- BFD_RELOC_MICROMIPS_CALL16:
 -- BFD_RELOC_MIPS_GOT_HI16:
 -- BFD_RELOC_MICROMIPS_GOT_HI16:
 -- BFD_RELOC_MIPS_GOT_LO16:
 -- BFD_RELOC_MICROMIPS_GOT_LO16:
 -- BFD_RELOC_MIPS_CALL_HI16:
 -- BFD_RELOC_MICROMIPS_CALL_HI16:
 -- BFD_RELOC_MIPS_CALL_LO16:
 -- BFD_RELOC_MICROMIPS_CALL_LO16:
 -- BFD_RELOC_MIPS_SUB:
 -- BFD_RELOC_MICROMIPS_SUB:
 -- BFD_RELOC_MIPS_GOT_PAGE:
 -- BFD_RELOC_MICROMIPS_GOT_PAGE:
 -- BFD_RELOC_MIPS_GOT_OFST:
 -- BFD_RELOC_MICROMIPS_GOT_OFST:
 -- BFD_RELOC_MIPS_GOT_DISP:
 -- BFD_RELOC_MICROMIPS_GOT_DISP:
 -- BFD_RELOC_MIPS_SHIFT5:
 -- BFD_RELOC_MIPS_SHIFT6:
 -- BFD_RELOC_MIPS_INSERT_A:
 -- BFD_RELOC_MIPS_INSERT_B:
 -- BFD_RELOC_MIPS_DELETE:
 -- BFD_RELOC_MIPS_HIGHEST:
 -- BFD_RELOC_MICROMIPS_HIGHEST:
 -- BFD_RELOC_MIPS_HIGHER:
 -- BFD_RELOC_MICROMIPS_HIGHER:
 -- BFD_RELOC_MIPS_SCN_DISP:
 -- BFD_RELOC_MICROMIPS_SCN_DISP:
 -- BFD_RELOC_MIPS_REL16:
 -- BFD_RELOC_MIPS_RELGOT:
 -- BFD_RELOC_MIPS_JALR:
 -- BFD_RELOC_MICROMIPS_JALR:
 -- BFD_RELOC_MIPS_TLS_DTPMOD32:
 -- BFD_RELOC_MIPS_TLS_DTPREL32:
 -- BFD_RELOC_MIPS_TLS_DTPMOD64:
 -- BFD_RELOC_MIPS_TLS_DTPREL64:
 -- BFD_RELOC_MIPS_TLS_GD:
 -- BFD_RELOC_MICROMIPS_TLS_GD:
 -- BFD_RELOC_MIPS_TLS_LDM:
 -- BFD_RELOC_MICROMIPS_TLS_LDM:
 -- BFD_RELOC_MIPS_TLS_DTPREL_HI16:
 -- BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16:
 -- BFD_RELOC_MIPS_TLS_DTPREL_LO16:
 -- BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16:
 -- BFD_RELOC_MIPS_TLS_GOTTPREL:
 -- BFD_RELOC_MICROMIPS_TLS_GOTTPREL:
 -- BFD_RELOC_MIPS_TLS_TPREL32:
 -- BFD_RELOC_MIPS_TLS_TPREL64:
 -- BFD_RELOC_MIPS_TLS_TPREL_HI16:
 -- BFD_RELOC_MICROMIPS_TLS_TPREL_HI16:
 -- BFD_RELOC_MIPS_TLS_TPREL_LO16:
 -- BFD_RELOC_MICROMIPS_TLS_TPREL_LO16:
 -- BFD_RELOC_MIPS_EH:
     MIPS ELF relocations.

 -- BFD_RELOC_MIPS_COPY:
 -- BFD_RELOC_MIPS_JUMP_SLOT:
     MIPS ELF relocations (VxWorks and PLT extensions).

 -- BFD_RELOC_MOXIE_10_PCREL:
     Moxie ELF relocations.

 -- BFD_RELOC_FT32_10:
 -- BFD_RELOC_FT32_20:
 -- BFD_RELOC_FT32_17:
 -- BFD_RELOC_FT32_18:
 -- BFD_RELOC_FT32_RELAX:
 -- BFD_RELOC_FT32_SC0:
 -- BFD_RELOC_FT32_SC1:
 -- BFD_RELOC_FT32_15:
 -- BFD_RELOC_FT32_DIFF32:
     FT32 ELF relocations.

 -- BFD_RELOC_FRV_LABEL16:
 -- BFD_RELOC_FRV_LABEL24:
 -- BFD_RELOC_FRV_LO16:
 -- BFD_RELOC_FRV_HI16:
 -- BFD_RELOC_FRV_GPREL12:
 -- BFD_RELOC_FRV_GPRELU12:
 -- BFD_RELOC_FRV_GPREL32:
 -- BFD_RELOC_FRV_GPRELHI:
 -- BFD_RELOC_FRV_GPRELLO:
 -- BFD_RELOC_FRV_GOT12:
 -- BFD_RELOC_FRV_GOTHI:
 -- BFD_RELOC_FRV_GOTLO:
 -- BFD_RELOC_FRV_FUNCDESC:
 -- BFD_RELOC_FRV_FUNCDESC_GOT12:
 -- BFD_RELOC_FRV_FUNCDESC_GOTHI:
 -- BFD_RELOC_FRV_FUNCDESC_GOTLO:
 -- BFD_RELOC_FRV_FUNCDESC_VALUE:
 -- BFD_RELOC_FRV_FUNCDESC_GOTOFF12:
 -- BFD_RELOC_FRV_FUNCDESC_GOTOFFHI:
 -- BFD_RELOC_FRV_FUNCDESC_GOTOFFLO:
 -- BFD_RELOC_FRV_GOTOFF12:
 -- BFD_RELOC_FRV_GOTOFFHI:
 -- BFD_RELOC_FRV_GOTOFFLO:
 -- BFD_RELOC_FRV_GETTLSOFF:
 -- BFD_RELOC_FRV_TLSDESC_VALUE:
 -- BFD_RELOC_FRV_GOTTLSDESC12:
 -- BFD_RELOC_FRV_GOTTLSDESCHI:
 -- BFD_RELOC_FRV_GOTTLSDESCLO:
 -- BFD_RELOC_FRV_TLSMOFF12:
 -- BFD_RELOC_FRV_TLSMOFFHI:
 -- BFD_RELOC_FRV_TLSMOFFLO:
 -- BFD_RELOC_FRV_GOTTLSOFF12:
 -- BFD_RELOC_FRV_GOTTLSOFFHI:
 -- BFD_RELOC_FRV_GOTTLSOFFLO:
 -- BFD_RELOC_FRV_TLSOFF:
 -- BFD_RELOC_FRV_TLSDESC_RELAX:
 -- BFD_RELOC_FRV_GETTLSOFF_RELAX:
 -- BFD_RELOC_FRV_TLSOFF_RELAX:
 -- BFD_RELOC_FRV_TLSMOFF:
     Fujitsu Frv Relocations.

 -- BFD_RELOC_MN10300_GOTOFF24:
     This is a 24bit GOT-relative reloc for the mn10300.

 -- BFD_RELOC_MN10300_GOT32:
     This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes in the instruction.

 -- BFD_RELOC_MN10300_GOT24:
     This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes in the instruction.

 -- BFD_RELOC_MN10300_GOT16:
     This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes in the instruction.

 -- BFD_RELOC_MN10300_COPY:
     Copy symbol at runtime.

 -- BFD_RELOC_MN10300_GLOB_DAT:
     Create GOT entry.

 -- BFD_RELOC_MN10300_JMP_SLOT:
     Create PLT entry.

 -- BFD_RELOC_MN10300_RELATIVE:
     Adjust by program base.

 -- BFD_RELOC_MN10300_SYM_DIFF:
     Together with another reloc targeted at the same location, allows for a value that is the difference of two symbols in the same section.

 -- BFD_RELOC_MN10300_ALIGN:
     The addend of this reloc is an alignment power that must be honoured at the offset's location, regardless of linker relaxation.

 -- BFD_RELOC_MN10300_TLS_GD:
 -- BFD_RELOC_MN10300_TLS_LD:
 -- BFD_RELOC_MN10300_TLS_LDO:
 -- BFD_RELOC_MN10300_TLS_GOTIE:
 -- BFD_RELOC_MN10300_TLS_IE:
 -- BFD_RELOC_MN10300_TLS_LE:
 -- BFD_RELOC_MN10300_TLS_DTPMOD:
 -- BFD_RELOC_MN10300_TLS_DTPOFF:
 -- BFD_RELOC_MN10300_TLS_TPOFF:
     Various TLS-related relocations.

 -- BFD_RELOC_MN10300_32_PCREL:
     This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the instruction.

 -- BFD_RELOC_MN10300_16_PCREL:
     This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the instruction.

 -- BFD_RELOC_386_GOT32:
 -- BFD_RELOC_386_PLT32:
 -- BFD_RELOC_386_COPY:
 -- BFD_RELOC_386_GLOB_DAT:
 -- BFD_RELOC_386_JUMP_SLOT:
 -- BFD_RELOC_386_RELATIVE:
 -- BFD_RELOC_386_GOTOFF:
 -- BFD_RELOC_386_GOTPC:
 -- BFD_RELOC_386_TLS_TPOFF:
 -- BFD_RELOC_386_TLS_IE:
 -- BFD_RELOC_386_TLS_GOTIE:
 -- BFD_RELOC_386_TLS_LE:
 -- BFD_RELOC_386_TLS_GD:
 -- BFD_RELOC_386_TLS_LDM:
 -- BFD_RELOC_386_TLS_LDO_32:
 -- BFD_RELOC_386_TLS_IE_32:
 -- BFD_RELOC_386_TLS_LE_32:
 -- BFD_RELOC_386_TLS_DTPMOD32:
 -- BFD_RELOC_386_TLS_DTPOFF32:
 -- BFD_RELOC_386_TLS_TPOFF32:
 -- BFD_RELOC_386_TLS_GOTDESC:
 -- BFD_RELOC_386_TLS_DESC_CALL:
 -- BFD_RELOC_386_TLS_DESC:
 -- BFD_RELOC_386_IRELATIVE:
 -- BFD_RELOC_386_GOT32X:
     i386/elf relocations

 -- BFD_RELOC_X86_64_GOT32:
 -- BFD_RELOC_X86_64_PLT32:
 -- BFD_RELOC_X86_64_COPY:
 -- BFD_RELOC_X86_64_GLOB_DAT:
 -- BFD_RELOC_X86_64_JUMP_SLOT:
 -- BFD_RELOC_X86_64_RELATIVE:
 -- BFD_RELOC_X86_64_GOTPCREL:
 -- BFD_RELOC_X86_64_32S:
 -- BFD_RELOC_X86_64_DTPMOD64:
 -- BFD_RELOC_X86_64_DTPOFF64:
 -- BFD_RELOC_X86_64_TPOFF64:
 -- BFD_RELOC_X86_64_TLSGD:
 -- BFD_RELOC_X86_64_TLSLD:
 -- BFD_RELOC_X86_64_DTPOFF32:
 -- BFD_RELOC_X86_64_GOTTPOFF:
 -- BFD_RELOC_X86_64_TPOFF32:
 -- BFD_RELOC_X86_64_GOTOFF64:
 -- BFD_RELOC_X86_64_GOTPC32:
 -- BFD_RELOC_X86_64_GOT64:
 -- BFD_RELOC_X86_64_GOTPCREL64:
 -- BFD_RELOC_X86_64_GOTPC64:
 -- BFD_RELOC_X86_64_GOTPLT64:
 -- BFD_RELOC_X86_64_PLTOFF64:
 -- BFD_RELOC_X86_64_GOTPC32_TLSDESC:
 -- BFD_RELOC_X86_64_TLSDESC_CALL:
 -- BFD_RELOC_X86_64_TLSDESC:
 -- BFD_RELOC_X86_64_IRELATIVE:
 -- BFD_RELOC_X86_64_PC32_BND:
 -- BFD_RELOC_X86_64_PLT32_BND:
 -- BFD_RELOC_X86_64_GOTPCRELX:
 -- BFD_RELOC_X86_64_REX_GOTPCRELX:
     x86-64/elf relocations

 -- BFD_RELOC_NS32K_IMM_8:
 -- BFD_RELOC_NS32K_IMM_16:
 -- BFD_RELOC_NS32K_IMM_32:
 -- BFD_RELOC_NS32K_IMM_8_PCREL:
 -- BFD_RELOC_NS32K_IMM_16_PCREL:
 -- BFD_RELOC_NS32K_IMM_32_PCREL:
 -- BFD_RELOC_NS32K_DISP_8:
 -- BFD_RELOC_NS32K_DISP_16:
 -- BFD_RELOC_NS32K_DISP_32:
 -- BFD_RELOC_NS32K_DISP_8_PCREL:
 -- BFD_RELOC_NS32K_DISP_16_PCREL:
 -- BFD_RELOC_NS32K_DISP_32_PCREL:
     ns32k relocations

 -- BFD_RELOC_PDP11_DISP_8_PCREL:
 -- BFD_RELOC_PDP11_DISP_6_PCREL:
     PDP11 relocations

 -- BFD_RELOC_PJ_CODE_HI16:
 -- BFD_RELOC_PJ_CODE_LO16:
 -- BFD_RELOC_PJ_CODE_DIR16:
 -- BFD_RELOC_PJ_CODE_DIR32:
 -- BFD_RELOC_PJ_CODE_REL16:
 -- BFD_RELOC_PJ_CODE_REL32:
     Picojava relocs.  Not all of these appear in object files.

 -- BFD_RELOC_PPC_B26:
 -- BFD_RELOC_PPC_BA26:
 -- BFD_RELOC_PPC_TOC16:
 -- BFD_RELOC_PPC_TOC16_LO:
 -- BFD_RELOC_PPC_TOC16_HI:
 -- BFD_RELOC_PPC_B16:
 -- BFD_RELOC_PPC_B16_BRTAKEN:
 -- BFD_RELOC_PPC_B16_BRNTAKEN:
 -- BFD_RELOC_PPC_BA16:
 -- BFD_RELOC_PPC_BA16_BRTAKEN:
 -- BFD_RELOC_PPC_BA16_BRNTAKEN:
 -- BFD_RELOC_PPC_COPY:
 -- BFD_RELOC_PPC_GLOB_DAT:
 -- BFD_RELOC_PPC_JMP_SLOT:
 -- BFD_RELOC_PPC_RELATIVE:
 -- BFD_RELOC_PPC_LOCAL24PC:
 -- BFD_RELOC_PPC_EMB_NADDR32:
 -- BFD_RELOC_PPC_EMB_NADDR16:
 -- BFD_RELOC_PPC_EMB_NADDR16_LO:
 -- BFD_RELOC_PPC_EMB_NADDR16_HI:
 -- BFD_RELOC_PPC_EMB_NADDR16_HA:
 -- BFD_RELOC_PPC_EMB_SDAI16:
 -- BFD_RELOC_PPC_EMB_SDA2I16:
 -- BFD_RELOC_PPC_EMB_SDA2REL:
 -- BFD_RELOC_PPC_EMB_SDA21:
 -- BFD_RELOC_PPC_EMB_MRKREF:
 -- BFD_RELOC_PPC_EMB_RELSEC16:
 -- BFD_RELOC_PPC_EMB_RELST_LO:
 -- BFD_RELOC_PPC_EMB_RELST_HI:
 -- BFD_RELOC_PPC_EMB_RELST_HA:
 -- BFD_RELOC_PPC_EMB_BIT_FLD:
 -- BFD_RELOC_PPC_EMB_RELSDA:
 -- BFD_RELOC_PPC_VLE_REL8:
 -- BFD_RELOC_PPC_VLE_REL15:
 -- BFD_RELOC_PPC_VLE_REL24:
 -- BFD_RELOC_PPC_VLE_LO16A:
 -- BFD_RELOC_PPC_VLE_LO16D:
 -- BFD_RELOC_PPC_VLE_HI16A:
 -- BFD_RELOC_PPC_VLE_HI16D:
 -- BFD_RELOC_PPC_VLE_HA16A:
 -- BFD_RELOC_PPC_VLE_HA16D:
 -- BFD_RELOC_PPC_VLE_SDA21:
 -- BFD_RELOC_PPC_VLE_SDA21_LO:
 -- BFD_RELOC_PPC_VLE_SDAREL_LO16A:
 -- BFD_RELOC_PPC_VLE_SDAREL_LO16D:
 -- BFD_RELOC_PPC_VLE_SDAREL_HI16A:
 -- BFD_RELOC_PPC_VLE_SDAREL_HI16D:
 -- BFD_RELOC_PPC_VLE_SDAREL_HA16A:
 -- BFD_RELOC_PPC_VLE_SDAREL_HA16D:
 -- BFD_RELOC_PPC_16DX_HA:
 -- BFD_RELOC_PPC_REL16DX_HA:
 -- BFD_RELOC_PPC_NEG:
 -- BFD_RELOC_PPC64_HIGHER:
 -- BFD_RELOC_PPC64_HIGHER_S:
 -- BFD_RELOC_PPC64_HIGHEST:
 -- BFD_RELOC_PPC64_HIGHEST_S:
 -- BFD_RELOC_PPC64_TOC16_LO:
 -- BFD_RELOC_PPC64_TOC16_HI:
 -- BFD_RELOC_PPC64_TOC16_HA:
 -- BFD_RELOC_PPC64_TOC:
 -- BFD_RELOC_PPC64_PLTGOT16:
 -- BFD_RELOC_PPC64_PLTGOT16_LO:
 -- BFD_RELOC_PPC64_PLTGOT16_HI:
 -- BFD_RELOC_PPC64_PLTGOT16_HA:
 -- BFD_RELOC_PPC64_ADDR16_DS:
 -- BFD_RELOC_PPC64_ADDR16_LO_DS:
 -- BFD_RELOC_PPC64_GOT16_DS:
 -- BFD_RELOC_PPC64_GOT16_LO_DS:
 -- BFD_RELOC_PPC64_PLT16_LO_DS:
 -- BFD_RELOC_PPC64_SECTOFF_DS:
 -- BFD_RELOC_PPC64_SECTOFF_LO_DS:
 -- BFD_RELOC_PPC64_TOC16_DS:
 -- BFD_RELOC_PPC64_TOC16_LO_DS:
 -- BFD_RELOC_PPC64_PLTGOT16_DS:
 -- BFD_RELOC_PPC64_PLTGOT16_LO_DS:
 -- BFD_RELOC_PPC64_ADDR16_HIGH:
 -- BFD_RELOC_PPC64_ADDR16_HIGHA:
 -- BFD_RELOC_PPC64_REL16_HIGH:
 -- BFD_RELOC_PPC64_REL16_HIGHA:
 -- BFD_RELOC_PPC64_REL16_HIGHER:
 -- BFD_RELOC_PPC64_REL16_HIGHERA:
 -- BFD_RELOC_PPC64_REL16_HIGHEST:
 -- BFD_RELOC_PPC64_REL16_HIGHESTA:
 -- BFD_RELOC_PPC64_ADDR64_LOCAL:
 -- BFD_RELOC_PPC64_ENTRY:
 -- BFD_RELOC_PPC64_REL24_NOTOC:
 -- BFD_RELOC_PPC64_D34:
 -- BFD_RELOC_PPC64_D34_LO:
 -- BFD_RELOC_PPC64_D34_HI30:
 -- BFD_RELOC_PPC64_D34_HA30:
 -- BFD_RELOC_PPC64_PCREL34:
 -- BFD_RELOC_PPC64_GOT_PCREL34:
 -- BFD_RELOC_PPC64_PLT_PCREL34:
 -- BFD_RELOC_PPC64_ADDR16_HIGHER34:
 -- BFD_RELOC_PPC64_ADDR16_HIGHERA34:
 -- BFD_RELOC_PPC64_ADDR16_HIGHEST34:
 -- BFD_RELOC_PPC64_ADDR16_HIGHESTA34:
 -- BFD_RELOC_PPC64_REL16_HIGHER34:
 -- BFD_RELOC_PPC64_REL16_HIGHERA34:
 -- BFD_RELOC_PPC64_REL16_HIGHEST34:
 -- BFD_RELOC_PPC64_REL16_HIGHESTA34:
 -- BFD_RELOC_PPC64_D28:
 -- BFD_RELOC_PPC64_PCREL28:
     Power(rs6000) and PowerPC relocations.

 -- BFD_RELOC_PPC_TLS:
 -- BFD_RELOC_PPC_TLSGD:
 -- BFD_RELOC_PPC_TLSLD:
 -- BFD_RELOC_PPC_TLSLE:
 -- BFD_RELOC_PPC_TLSIE:
 -- BFD_RELOC_PPC_TLSM:
 -- BFD_RELOC_PPC_TLSML:
 -- BFD_RELOC_PPC_DTPMOD:
 -- BFD_RELOC_PPC_TPREL16:
 -- BFD_RELOC_PPC_TPREL16_LO:
 -- BFD_RELOC_PPC_TPREL16_HI:
 -- BFD_RELOC_PPC_TPREL16_HA:
 -- BFD_RELOC_PPC_TPREL:
 -- BFD_RELOC_PPC_DTPREL16:
 -- BFD_RELOC_PPC_DTPREL16_LO:
 -- BFD_RELOC_PPC_DTPREL16_HI:
 -- BFD_RELOC_PPC_DTPREL16_HA:
 -- BFD_RELOC_PPC_DTPREL:
 -- BFD_RELOC_PPC_GOT_TLSGD16:
 -- BFD_RELOC_PPC_GOT_TLSGD16_LO:
 -- BFD_RELOC_PPC_GOT_TLSGD16_HI:
 -- BFD_RELOC_PPC_GOT_TLSGD16_HA:
 -- BFD_RELOC_PPC_GOT_TLSLD16:
 -- BFD_RELOC_PPC_GOT_TLSLD16_LO:
 -- BFD_RELOC_PPC_GOT_TLSLD16_HI:
 -- BFD_RELOC_PPC_GOT_TLSLD16_HA:
 -- BFD_RELOC_PPC_GOT_TPREL16:
 -- BFD_RELOC_PPC_GOT_TPREL16_LO:
 -- BFD_RELOC_PPC_GOT_TPREL16_HI:
 -- BFD_RELOC_PPC_GOT_TPREL16_HA:
 -- BFD_RELOC_PPC_GOT_DTPREL16:
 -- BFD_RELOC_PPC_GOT_DTPREL16_LO:
 -- BFD_RELOC_PPC_GOT_DTPREL16_HI:
 -- BFD_RELOC_PPC_GOT_DTPREL16_HA:
 -- BFD_RELOC_PPC64_TLSGD:
 -- BFD_RELOC_PPC64_TLSLD:
 -- BFD_RELOC_PPC64_TLSLE:
 -- BFD_RELOC_PPC64_TLSIE:
 -- BFD_RELOC_PPC64_TLSM:
 -- BFD_RELOC_PPC64_TLSML:
 -- BFD_RELOC_PPC64_TPREL16_DS:
 -- BFD_RELOC_PPC64_TPREL16_LO_DS:
 -- BFD_RELOC_PPC64_TPREL16_HIGH:
 -- BFD_RELOC_PPC64_TPREL16_HIGHA:
 -- BFD_RELOC_PPC64_TPREL16_HIGHER:
 -- BFD_RELOC_PPC64_TPREL16_HIGHERA:
 -- BFD_RELOC_PPC64_TPREL16_HIGHEST:
 -- BFD_RELOC_PPC64_TPREL16_HIGHESTA:
 -- BFD_RELOC_PPC64_DTPREL16_DS:
 -- BFD_RELOC_PPC64_DTPREL16_LO_DS:
 -- BFD_RELOC_PPC64_DTPREL16_HIGH:
 -- BFD_RELOC_PPC64_DTPREL16_HIGHA:
 -- BFD_RELOC_PPC64_DTPREL16_HIGHER:
 -- BFD_RELOC_PPC64_DTPREL16_HIGHERA:
 -- BFD_RELOC_PPC64_DTPREL16_HIGHEST:
 -- BFD_RELOC_PPC64_DTPREL16_HIGHESTA:
 -- BFD_RELOC_PPC64_TPREL34:
 -- BFD_RELOC_PPC64_DTPREL34:
 -- BFD_RELOC_PPC64_GOT_TLSGD_PCREL34:
 -- BFD_RELOC_PPC64_GOT_TLSLD_PCREL34:
 -- BFD_RELOC_PPC64_GOT_TPREL_PCREL34:
 -- BFD_RELOC_PPC64_GOT_DTPREL_PCREL34:
 -- BFD_RELOC_PPC64_TLS_PCREL:
     PowerPC and PowerPC64 thread-local storage relocations.

 -- BFD_RELOC_I370_D12:
     IBM 370/390 relocations

 -- BFD_RELOC_CTOR:
     The type of reloc used to build a constructor table - at the moment probably a 32 bit wide absolute relocation, but the target can choose. It generally does map to one of the other relocation types.

 -- BFD_RELOC_ARM_PCREL_BRANCH:
     ARM 26 bit pc-relative branch.  The lowest two bits must be zero and are not stored in the instruction.

 -- BFD_RELOC_ARM_PCREL_BLX:
     ARM 26 bit pc-relative branch.  The lowest bit must be zero and is not stored in the instruction.  The 2nd lowest bit comes from a 1 bit field in the instruction.

 -- BFD_RELOC_THUMB_PCREL_BLX:
     Thumb 22 bit pc-relative branch.  The lowest bit must be zero and is not stored in the instruction.  The 2nd lowest bit comes from a 1 bit field in the instruction.

 -- BFD_RELOC_ARM_PCREL_CALL:
     ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.

 -- BFD_RELOC_ARM_PCREL_JUMP:
     ARM 26-bit pc-relative branch for B or conditional BL instruction.

 -- BFD_RELOC_THUMB_PCREL_BRANCH5:
     ARM 5-bit pc-relative branch for Branch Future instructions.

 -- BFD_RELOC_THUMB_PCREL_BFCSEL:
     ARM 6-bit pc-relative branch for BFCSEL instruction.

 -- BFD_RELOC_ARM_THUMB_BF17:
     ARM 17-bit pc-relative branch for Branch Future instructions.

 -- BFD_RELOC_ARM_THUMB_BF13:
     ARM 13-bit pc-relative branch for BFCSEL instruction.

 -- BFD_RELOC_ARM_THUMB_BF19:
     ARM 19-bit pc-relative branch for Branch Future Link instruction.

 -- BFD_RELOC_ARM_THUMB_LOOP12:
     ARM 12-bit pc-relative branch for Low Overhead Loop instructions.

 -- BFD_RELOC_THUMB_PCREL_BRANCH7:
 -- BFD_RELOC_THUMB_PCREL_BRANCH9:
 -- BFD_RELOC_THUMB_PCREL_BRANCH12:
 -- BFD_RELOC_THUMB_PCREL_BRANCH20:
 -- BFD_RELOC_THUMB_PCREL_BRANCH23:
 -- BFD_RELOC_THUMB_PCREL_BRANCH25:
     Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches. The lowest bit must be zero and is not stored in the instruction. Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an "nn" one smaller in all cases.  Note further that BRANCH23 corresponds to R_ARM_THM_CALL.

 -- BFD_RELOC_ARM_OFFSET_IMM:
     12-bit immediate offset, used in ARM-format ldr and str instructions.

 -- BFD_RELOC_ARM_THUMB_OFFSET:
     5-bit immediate offset, used in Thumb-format ldr and str instructions.

 -- BFD_RELOC_ARM_TARGET1:
     Pc-relative or absolute relocation depending on target.  Used for entries in .init_array sections.

 -- BFD_RELOC_ARM_ROSEGREL32:
     Read-only segment base relative address.

 -- BFD_RELOC_ARM_SBREL32:
     Data segment base relative address.

 -- BFD_RELOC_ARM_TARGET2:
     This reloc is used for references to RTTI data from exception handling tables.  The actual definition depends on the target.  It may be a pc-relative or some form of GOT-indirect relocation.

 -- BFD_RELOC_ARM_PREL31:
     31-bit PC relative address.

 -- BFD_RELOC_ARM_MOVW:
 -- BFD_RELOC_ARM_MOVT:
 -- BFD_RELOC_ARM_MOVW_PCREL:
 -- BFD_RELOC_ARM_MOVT_PCREL:
 -- BFD_RELOC_ARM_THUMB_MOVW:
 -- BFD_RELOC_ARM_THUMB_MOVT:
 -- BFD_RELOC_ARM_THUMB_MOVW_PCREL:
 -- BFD_RELOC_ARM_THUMB_MOVT_PCREL:
     Low and High halfword relocations for MOVW and MOVT instructions.

 -- BFD_RELOC_ARM_GOTFUNCDESC:
 -- BFD_RELOC_ARM_GOTOFFFUNCDESC:
 -- BFD_RELOC_ARM_FUNCDESC:
 -- BFD_RELOC_ARM_FUNCDESC_VALUE:
 -- BFD_RELOC_ARM_TLS_GD32_FDPIC:
 -- BFD_RELOC_ARM_TLS_LDM32_FDPIC:
 -- BFD_RELOC_ARM_TLS_IE32_FDPIC:
     ARM FDPIC specific relocations.

 -- BFD_RELOC_ARM_JUMP_SLOT:
 -- BFD_RELOC_ARM_GLOB_DAT:
 -- BFD_RELOC_ARM_GOT32:
 -- BFD_RELOC_ARM_PLT32:
 -- BFD_RELOC_ARM_RELATIVE:
 -- BFD_RELOC_ARM_GOTOFF:
 -- BFD_RELOC_ARM_GOTPC:
 -- BFD_RELOC_ARM_GOT_PREL:
     Relocations for setting up GOTs and PLTs for shared libraries.

 -- BFD_RELOC_ARM_TLS_GD32:
 -- BFD_RELOC_ARM_TLS_LDO32:
 -- BFD_RELOC_ARM_TLS_LDM32:
 -- BFD_RELOC_ARM_TLS_DTPOFF32:
 -- BFD_RELOC_ARM_TLS_DTPMOD32:
 -- BFD_RELOC_ARM_TLS_TPOFF32:
 -- BFD_RELOC_ARM_TLS_IE32:
 -- BFD_RELOC_ARM_TLS_LE32:
 -- BFD_RELOC_ARM_TLS_GOTDESC:
 -- BFD_RELOC_ARM_TLS_CALL:
 -- BFD_RELOC_ARM_THM_TLS_CALL:
 -- BFD_RELOC_ARM_TLS_DESCSEQ:
 -- BFD_RELOC_ARM_THM_TLS_DESCSEQ:
 -- BFD_RELOC_ARM_TLS_DESC:
     ARM thread-local storage relocations.

 -- BFD_RELOC_ARM_ALU_PC_G0_NC:
 -- BFD_RELOC_ARM_ALU_PC_G0:
 -- BFD_RELOC_ARM_ALU_PC_G1_NC:
 -- BFD_RELOC_ARM_ALU_PC_G1:
 -- BFD_RELOC_ARM_ALU_PC_G2:
 -- BFD_RELOC_ARM_LDR_PC_G0:
 -- BFD_RELOC_ARM_LDR_PC_G1:
 -- BFD_RELOC_ARM_LDR_PC_G2:
 -- BFD_RELOC_ARM_LDRS_PC_G0:
 -- BFD_RELOC_ARM_LDRS_PC_G1:
 -- BFD_RELOC_ARM_LDRS_PC_G2:
 -- BFD_RELOC_ARM_LDC_PC_G0:
 -- BFD_RELOC_ARM_LDC_PC_G1:
 -- BFD_RELOC_ARM_LDC_PC_G2:
 -- BFD_RELOC_ARM_ALU_SB_G0_NC:
 -- BFD_RELOC_ARM_ALU_SB_G0:
 -- BFD_RELOC_ARM_ALU_SB_G1_NC:
 -- BFD_RELOC_ARM_ALU_SB_G1:
 -- BFD_RELOC_ARM_ALU_SB_G2:
 -- BFD_RELOC_ARM_LDR_SB_G0:
 -- BFD_RELOC_ARM_LDR_SB_G1:
 -- BFD_RELOC_ARM_LDR_SB_G2:
 -- BFD_RELOC_ARM_LDRS_SB_G0:
 -- BFD_RELOC_ARM_LDRS_SB_G1:
 -- BFD_RELOC_ARM_LDRS_SB_G2:
 -- BFD_RELOC_ARM_LDC_SB_G0:
 -- BFD_RELOC_ARM_LDC_SB_G1:
 -- BFD_RELOC_ARM_LDC_SB_G2:
     ARM group relocations.

 -- BFD_RELOC_ARM_V4BX:
     Annotation of BX instructions.

 -- BFD_RELOC_ARM_IRELATIVE:
     ARM support for STT_GNU_IFUNC.

 -- BFD_RELOC_ARM_THUMB_ALU_ABS_G0_NC:
 -- BFD_RELOC_ARM_THUMB_ALU_ABS_G1_NC:
 -- BFD_RELOC_ARM_THUMB_ALU_ABS_G2_NC:
 -- BFD_RELOC_ARM_THUMB_ALU_ABS_G3_NC:
     Thumb1 relocations to support execute-only code.

 -- BFD_RELOC_ARM_IMMEDIATE:
 -- BFD_RELOC_ARM_ADRL_IMMEDIATE:
 -- BFD_RELOC_ARM_T32_IMMEDIATE:
 -- BFD_RELOC_ARM_T32_ADD_IMM:
 -- BFD_RELOC_ARM_T32_IMM12:
 -- BFD_RELOC_ARM_T32_ADD_PC12:
 -- BFD_RELOC_ARM_SHIFT_IMM:
 -- BFD_RELOC_ARM_SMC:
 -- BFD_RELOC_ARM_HVC:
 -- BFD_RELOC_ARM_SWI:
 -- BFD_RELOC_ARM_MULTI:
 -- BFD_RELOC_ARM_CP_OFF_IMM:
 -- BFD_RELOC_ARM_CP_OFF_IMM_S2:
 -- BFD_RELOC_ARM_T32_CP_OFF_IMM:
 -- BFD_RELOC_ARM_T32_CP_OFF_IMM_S2:
 -- BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM:
 -- BFD_RELOC_ARM_ADR_IMM:
 -- BFD_RELOC_ARM_LDR_IMM:
 -- BFD_RELOC_ARM_LITERAL:
 -- BFD_RELOC_ARM_IN_POOL:
 -- BFD_RELOC_ARM_OFFSET_IMM8:
 -- BFD_RELOC_ARM_T32_OFFSET_U8:
 -- BFD_RELOC_ARM_T32_OFFSET_IMM:
 -- BFD_RELOC_ARM_HWLITERAL:
 -- BFD_RELOC_ARM_THUMB_ADD:
 -- BFD_RELOC_ARM_THUMB_IMM:
 -- BFD_RELOC_ARM_THUMB_SHIFT:
     These relocs are only used within the ARM assembler.  They are not (at present) written to any object files.

 -- BFD_RELOC_SH_PCDISP8BY2:
 -- BFD_RELOC_SH_PCDISP12BY2:
 -- BFD_RELOC_SH_IMM3:
 -- BFD_RELOC_SH_IMM3U:
 -- BFD_RELOC_SH_DISP12:
 -- BFD_RELOC_SH_DISP12BY2:
 -- BFD_RELOC_SH_DISP12BY4:
 -- BFD_RELOC_SH_DISP12BY8:
 -- BFD_RELOC_SH_DISP20:
 -- BFD_RELOC_SH_DISP20BY8:
 -- BFD_RELOC_SH_IMM4:
 -- BFD_RELOC_SH_IMM4BY2:
 -- BFD_RELOC_SH_IMM4BY4:
 -- BFD_RELOC_SH_IMM8:
 -- BFD_RELOC_SH_IMM8BY2:
 -- BFD_RELOC_SH_IMM8BY4:
 -- BFD_RELOC_SH_PCRELIMM8BY2:
 -- BFD_RELOC_SH_PCRELIMM8BY4:
 -- BFD_RELOC_SH_SWITCH16:
 -- BFD_RELOC_SH_SWITCH32:
 -- BFD_RELOC_SH_USES:
 -- BFD_RELOC_SH_COUNT:
 -- BFD_RELOC_SH_ALIGN:
 -- BFD_RELOC_SH_CODE:
 -- BFD_RELOC_SH_DATA:
 -- BFD_RELOC_SH_LABEL:
 -- BFD_RELOC_SH_LOOP_START:
 -- BFD_RELOC_SH_LOOP_END:
 -- BFD_RELOC_SH_COPY:
 -- BFD_RELOC_SH_GLOB_DAT:
 -- BFD_RELOC_SH_JMP_SLOT:
 -- BFD_RELOC_SH_RELATIVE:
 -- BFD_RELOC_SH_GOTPC:
 -- BFD_RELOC_SH_GOT_LOW16:
 -- BFD_RELOC_SH_GOT_MEDLOW16:
 -- BFD_RELOC_SH_GOT_MEDHI16:
 -- BFD_RELOC_SH_GOT_HI16:
 -- BFD_RELOC_SH_GOTPLT_LOW16:
 -- BFD_RELOC_SH_GOTPLT_MEDLOW16:
 -- BFD_RELOC_SH_GOTPLT_MEDHI16:
 -- BFD_RELOC_SH_GOTPLT_HI16:
 -- BFD_RELOC_SH_PLT_LOW16:
 -- BFD_RELOC_SH_PLT_MEDLOW16:
 -- BFD_RELOC_SH_PLT_MEDHI16:
 -- BFD_RELOC_SH_PLT_HI16:
 -- BFD_RELOC_SH_GOTOFF_LOW16:
 -- BFD_RELOC_SH_GOTOFF_MEDLOW16:
 -- BFD_RELOC_SH_GOTOFF_MEDHI16:
 -- BFD_RELOC_SH_GOTOFF_HI16:
 -- BFD_RELOC_SH_GOTPC_LOW16:
 -- BFD_RELOC_SH_GOTPC_MEDLOW16:
 -- BFD_RELOC_SH_GOTPC_MEDHI16:
 -- BFD_RELOC_SH_GOTPC_HI16:
 -- BFD_RELOC_SH_COPY64:
 -- BFD_RELOC_SH_GLOB_DAT64:
 -- BFD_RELOC_SH_JMP_SLOT64:
 -- BFD_RELOC_SH_RELATIVE64:
 -- BFD_RELOC_SH_GOT10BY4:
 -- BFD_RELOC_SH_GOT10BY8:
 -- BFD_RELOC_SH_GOTPLT10BY4:
 -- BFD_RELOC_SH_GOTPLT10BY8:
 -- BFD_RELOC_SH_GOTPLT32:
 -- BFD_RELOC_SH_SHMEDIA_CODE:
 -- BFD_RELOC_SH_IMMU5:
 -- BFD_RELOC_SH_IMMS6:
 -- BFD_RELOC_SH_IMMS6BY32:
 -- BFD_RELOC_SH_IMMU6:
 -- BFD_RELOC_SH_IMMS10:
 -- BFD_RELOC_SH_IMMS10BY2:
 -- BFD_RELOC_SH_IMMS10BY4:
 -- BFD_RELOC_SH_IMMS10BY8:
 -- BFD_RELOC_SH_IMMS16:
 -- BFD_RELOC_SH_IMMU16:
 -- BFD_RELOC_SH_IMM_LOW16:
 -- BFD_RELOC_SH_IMM_LOW16_PCREL:
 -- BFD_RELOC_SH_IMM_MEDLOW16:
 -- BFD_RELOC_SH_IMM_MEDLOW16_PCREL:
 -- BFD_RELOC_SH_IMM_MEDHI16:
 -- BFD_RELOC_SH_IMM_MEDHI16_PCREL:
 -- BFD_RELOC_SH_IMM_HI16:
 -- BFD_RELOC_SH_IMM_HI16_PCREL:
 -- BFD_RELOC_SH_PT_16:
 -- BFD_RELOC_SH_TLS_GD_32:
 -- BFD_RELOC_SH_TLS_LD_32:
 -- BFD_RELOC_SH_TLS_LDO_32:
 -- BFD_RELOC_SH_TLS_IE_32:
 -- BFD_RELOC_SH_TLS_LE_32:
 -- BFD_RELOC_SH_TLS_DTPMOD32:
 -- BFD_RELOC_SH_TLS_DTPOFF32:
 -- BFD_RELOC_SH_TLS_TPOFF32:
 -- BFD_RELOC_SH_GOT20:
 -- BFD_RELOC_SH_GOTOFF20:
 -- BFD_RELOC_SH_GOTFUNCDESC:
 -- BFD_RELOC_SH_GOTFUNCDESC20:
 -- BFD_RELOC_SH_GOTOFFFUNCDESC:
 -- BFD_RELOC_SH_GOTOFFFUNCDESC20:
 -- BFD_RELOC_SH_FUNCDESC:
     Renesas / SuperH SH relocs.  Not all of these appear in object files.

 -- BFD_RELOC_ARC_NONE:
 -- BFD_RELOC_ARC_8:
 -- BFD_RELOC_ARC_16:
 -- BFD_RELOC_ARC_24:
 -- BFD_RELOC_ARC_32:
 -- BFD_RELOC_ARC_N8:
 -- BFD_RELOC_ARC_N16:
 -- BFD_RELOC_ARC_N24:
 -- BFD_RELOC_ARC_N32:
 -- BFD_RELOC_ARC_SDA:
 -- BFD_RELOC_ARC_SECTOFF:
 -- BFD_RELOC_ARC_S21H_PCREL:
 -- BFD_RELOC_ARC_S21W_PCREL:
 -- BFD_RELOC_ARC_S25H_PCREL:
 -- BFD_RELOC_ARC_S25W_PCREL:
 -- BFD_RELOC_ARC_SDA32:
 -- BFD_RELOC_ARC_SDA_LDST:
 -- BFD_RELOC_ARC_SDA_LDST1:
 -- BFD_RELOC_ARC_SDA_LDST2:
 -- BFD_RELOC_ARC_SDA16_LD:
 -- BFD_RELOC_ARC_SDA16_LD1:
 -- BFD_RELOC_ARC_SDA16_LD2:
 -- BFD_RELOC_ARC_S13_PCREL:
 -- BFD_RELOC_ARC_W:
 -- BFD_RELOC_ARC_32_ME:
 -- BFD_RELOC_ARC_32_ME_S:
 -- BFD_RELOC_ARC_N32_ME:
 -- BFD_RELOC_ARC_SECTOFF_ME:
 -- BFD_RELOC_ARC_SDA32_ME:
 -- BFD_RELOC_ARC_W_ME:
 -- BFD_RELOC_AC_SECTOFF_U8:
 -- BFD_RELOC_AC_SECTOFF_U8_1:
 -- BFD_RELOC_AC_SECTOFF_U8_2:
 -- BFD_RELOC_AC_SECTOFF_S9:
 -- BFD_RELOC_AC_SECTOFF_S9_1:
 -- BFD_RELOC_AC_SECTOFF_S9_2:
 -- BFD_RELOC_ARC_SECTOFF_ME_1:
 -- BFD_RELOC_ARC_SECTOFF_ME_2:
 -- BFD_RELOC_ARC_SECTOFF_1:
 -- BFD_RELOC_ARC_SECTOFF_2:
 -- BFD_RELOC_ARC_SDA_12:
 -- BFD_RELOC_ARC_SDA16_ST2:
 -- BFD_RELOC_ARC_32_PCREL:
 -- BFD_RELOC_ARC_PC32:
 -- BFD_RELOC_ARC_GOT32:
 -- BFD_RELOC_ARC_GOTPC32:
 -- BFD_RELOC_ARC_PLT32:
 -- BFD_RELOC_ARC_COPY:
 -- BFD_RELOC_ARC_GLOB_DAT:
 -- BFD_RELOC_ARC_JMP_SLOT:
 -- BFD_RELOC_ARC_RELATIVE:
 -- BFD_RELOC_ARC_GOTOFF:
 -- BFD_RELOC_ARC_GOTPC:
 -- BFD_RELOC_ARC_S21W_PCREL_PLT:
 -- BFD_RELOC_ARC_S25H_PCREL_PLT:
 -- BFD_RELOC_ARC_TLS_DTPMOD:
 -- BFD_RELOC_ARC_TLS_TPOFF:
 -- BFD_RELOC_ARC_TLS_GD_GOT:
 -- BFD_RELOC_ARC_TLS_GD_LD:
 -- BFD_RELOC_ARC_TLS_GD_CALL:
 -- BFD_RELOC_ARC_TLS_IE_GOT:
 -- BFD_RELOC_ARC_TLS_DTPOFF:
 -- BFD_RELOC_ARC_TLS_DTPOFF_S9:
 -- BFD_RELOC_ARC_TLS_LE_S9:
 -- BFD_RELOC_ARC_TLS_LE_32:
 -- BFD_RELOC_ARC_S25W_PCREL_PLT:
 -- BFD_RELOC_ARC_S21H_PCREL_PLT:
 -- BFD_RELOC_ARC_NPS_CMEM16:
 -- BFD_RELOC_ARC_JLI_SECTOFF:
     ARC relocs.

 -- BFD_RELOC_BFIN_16_IMM:
     ADI Blackfin 16 bit immediate absolute reloc.

 -- BFD_RELOC_BFIN_16_HIGH:
     ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.

 -- BFD_RELOC_BFIN_4_PCREL:
     ADI Blackfin 'a' part of LSETUP.

 -- BFD_RELOC_BFIN_5_PCREL:
     ADI Blackfin.

 -- BFD_RELOC_BFIN_16_LOW:
     ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.

 -- BFD_RELOC_BFIN_10_PCREL:
     ADI Blackfin.

 -- BFD_RELOC_BFIN_11_PCREL:
     ADI Blackfin 'b' part of LSETUP.

 -- BFD_RELOC_BFIN_12_PCREL_JUMP:
     ADI Blackfin.

 -- BFD_RELOC_BFIN_12_PCREL_JUMP_S:
     ADI Blackfin Short jump, pcrel.

 -- BFD_RELOC_BFIN_24_PCREL_CALL_X:
     ADI Blackfin Call.x not implemented.

 -- BFD_RELOC_BFIN_24_PCREL_JUMP_L:
     ADI Blackfin Long Jump pcrel.

 -- BFD_RELOC_BFIN_GOT17M4:
 -- BFD_RELOC_BFIN_GOTHI:
 -- BFD_RELOC_BFIN_GOTLO:
 -- BFD_RELOC_BFIN_FUNCDESC:
 -- BFD_RELOC_BFIN_FUNCDESC_GOT17M4:
 -- BFD_RELOC_BFIN_FUNCDESC_GOTHI:
 -- BFD_RELOC_BFIN_FUNCDESC_GOTLO:
 -- BFD_RELOC_BFIN_FUNCDESC_VALUE:
 -- BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4:
 -- BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI:
 -- BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO:
 -- BFD_RELOC_BFIN_GOTOFF17M4:
 -- BFD_RELOC_BFIN_GOTOFFHI:
 -- BFD_RELOC_BFIN_GOTOFFLO:
     ADI Blackfin FD-PIC relocations.

 -- BFD_RELOC_BFIN_GOT:
     ADI Blackfin GOT relocation.

 -- BFD_RELOC_BFIN_PLTPC:
     ADI Blackfin PLTPC relocation.

 -- BFD_ARELOC_BFIN_PUSH:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_CONST:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_ADD:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_SUB:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_MULT:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_DIV:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_MOD:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_LSHIFT:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_RSHIFT:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_AND:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_OR:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_XOR:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_LAND:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_LOR:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_LEN:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_NEG:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_COMP:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_PAGE:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_HWPAGE:
     ADI Blackfin arithmetic relocation.

 -- BFD_ARELOC_BFIN_ADDR:
     ADI Blackfin arithmetic relocation.

 -- BFD_RELOC_D10V_10_PCREL_R:
     Mitsubishi D10V relocs. This is a 10-bit reloc with the right 2 bits assumed to be 0.

 -- BFD_RELOC_D10V_10_PCREL_L:
     Mitsubishi D10V relocs. This is a 10-bit reloc with the right 2 bits assumed to be 0.  This is the same as the previous reloc except it is in the left container, i.e., shifted left 15 bits.

 -- BFD_RELOC_D10V_18:
     This is an 18-bit reloc with the right 2 bits assumed to be 0.

 -- BFD_RELOC_D10V_18_PCREL:
     This is an 18-bit reloc with the right 2 bits assumed to be 0.

 -- BFD_RELOC_D30V_6:
     Mitsubishi D30V relocs. This is a 6-bit absolute reloc.

 -- BFD_RELOC_D30V_9_PCREL:
     This is a 6-bit pc-relative reloc with the right 3 bits assumed to be 0.

 -- BFD_RELOC_D30V_9_PCREL_R:
     This is a 6-bit pc-relative reloc with the right 3 bits assumed to be 0. Same as the previous reloc but on the right side of the container.

 -- BFD_RELOC_D30V_15:
     This is a 12-bit absolute reloc with the right 3 bitsassumed to be 0.

 -- BFD_RELOC_D30V_15_PCREL:
     This is a 12-bit pc-relative reloc with the right 3 bits assumed to be 0.

 -- BFD_RELOC_D30V_15_PCREL_R:
     This is a 12-bit pc-relative reloc with the right 3 bits assumed to be 0. Same as the previous reloc but on the right side of the container.

 -- BFD_RELOC_D30V_21:
     This is an 18-bit absolute reloc with the right 3 bits assumed to be 0.

 -- BFD_RELOC_D30V_21_PCREL:
     This is an 18-bit pc-relative reloc with the right 3 bits assumed to be 0.

 -- BFD_RELOC_D30V_21_PCREL_R:
     This is an 18-bit pc-relative reloc with the right 3 bits assumed to be 0. Same as the previous reloc but on the right side of the container.

 -- BFD_RELOC_D30V_32:
     This is a 32-bit absolute reloc.

 -- BFD_RELOC_D30V_32_PCREL:
     This is a 32-bit pc-relative reloc.

 -- BFD_RELOC_DLX_HI16_S:
     DLX relocs

 -- BFD_RELOC_DLX_LO16:
     DLX relocs

 -- BFD_RELOC_DLX_JMP26:
     DLX relocs

 -- BFD_RELOC_M32C_HI8:
 -- BFD_RELOC_M32C_RL_JUMP:
 -- BFD_RELOC_M32C_RL_1ADDR:
 -- BFD_RELOC_M32C_RL_2ADDR:
     Renesas M16C/M32C Relocations.

 -- BFD_RELOC_M32R_24:
     Renesas M32R (formerly Mitsubishi M32R) relocs. This is a 24 bit absolute address.

 -- BFD_RELOC_M32R_10_PCREL:
     This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.

 -- BFD_RELOC_M32R_18_PCREL:
     This is an 18-bit reloc with the right 2 bits assumed to be 0.

 -- BFD_RELOC_M32R_26_PCREL:
     This is a 26-bit reloc with the right 2 bits assumed to be 0.

 -- BFD_RELOC_M32R_HI16_ULO:
     This is a 16-bit reloc containing the high 16 bits of an address used when the lower 16 bits are treated as unsigned.

 -- BFD_RELOC_M32R_HI16_SLO:
     This is a 16-bit reloc containing the high 16 bits of an address used when the lower 16 bits are treated as signed.

 -- BFD_RELOC_M32R_LO16:
     This is a 16-bit reloc containing the lower 16 bits of an address.

 -- BFD_RELOC_M32R_SDA16:
     This is a 16-bit reloc containing the small data area offset for use in add3, load, and store instructions.

 -- BFD_RELOC_M32R_GOT24:
 -- BFD_RELOC_M32R_26_PLTREL:
 -- BFD_RELOC_M32R_COPY:
 -- BFD_RELOC_M32R_GLOB_DAT:
 -- BFD_RELOC_M32R_JMP_SLOT:
 -- BFD_RELOC_M32R_RELATIVE:
 -- BFD_RELOC_M32R_GOTOFF:
 -- BFD_RELOC_M32R_GOTOFF_HI_ULO:
 -- BFD_RELOC_M32R_GOTOFF_HI_SLO:
 -- BFD_RELOC_M32R_GOTOFF_LO:
 -- BFD_RELOC_M32R_GOTPC24:
 -- BFD_RELOC_M32R_GOT16_HI_ULO:
 -- BFD_RELOC_M32R_GOT16_HI_SLO:
 -- BFD_RELOC_M32R_GOT16_LO:
 -- BFD_RELOC_M32R_GOTPC_HI_ULO:
 -- BFD_RELOC_M32R_GOTPC_HI_SLO:
 -- BFD_RELOC_M32R_GOTPC_LO:
     For PIC.

 -- BFD_RELOC_NDS32_20:
     NDS32 relocs. This is a 20 bit absolute address.

 -- BFD_RELOC_NDS32_9_PCREL:
     This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.

 -- BFD_RELOC_NDS32_WORD_9_PCREL:
     This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.

 -- BFD_RELOC_NDS32_15_PCREL:
     This is an 15-bit reloc with the right 1 bit assumed to be 0.

 -- BFD_RELOC_NDS32_17_PCREL:
     This is an 17-bit reloc with the right 1 bit assumed to be 0.

 -- BFD_RELOC_NDS32_25_PCREL:
     This is a 25-bit reloc with the right 1 bit assumed to be 0.

 -- BFD_RELOC_NDS32_HI20:
     This is a 20-bit reloc containing the high 20 bits of an address used with the lower 12 bits

 -- BFD_RELOC_NDS32_LO12S3:
     This is a 12-bit reloc containing the lower 12 bits of an address then shift right by 3. This is used with ldi,sdi...

 -- BFD_RELOC_NDS32_LO12S2:
     This is a 12-bit reloc containing the lower 12 bits of an address then shift left by 2. This is used with lwi,swi...

 -- BFD_RELOC_NDS32_LO12S1:
     This is a 12-bit reloc containing the lower 12 bits of an address then shift left by 1. This is used with lhi,shi...

 -- BFD_RELOC_NDS32_LO12S0:
     This is a 12-bit reloc containing the lower 12 bits of an address then shift left by 0. This is used with lbisbi...

 -- BFD_RELOC_NDS32_LO12S0_ORI:
     This is a 12-bit reloc containing the lower 12 bits of an address then shift left by 0. This is only used with branch relaxations

 -- BFD_RELOC_NDS32_SDA15S3:
     This is a 15-bit reloc containing the small data area 18-bit signed offset and shift left by 3 for use in ldi, sdi...

 -- BFD_RELOC_NDS32_SDA15S2:
     This is a 15-bit reloc containing the small data area 17-bit signed offset and shift left by 2 for use in lwi, swi...

 -- BFD_RELOC_NDS32_SDA15S1:
     This is a 15-bit reloc containing the small data area 16-bit signed offset and shift left by 1 for use in lhi, shi...

 -- BFD_RELOC_NDS32_SDA15S0:
     This is a 15-bit reloc containing the small data area 15-bit signed offset and shift left by 0 for use in lbi, sbi...

 -- BFD_RELOC_NDS32_SDA16S3:
     This is a 16-bit reloc containing the small data area 16-bit signed offset and shift left by 3

 -- BFD_RELOC_NDS32_SDA17S2:
     This is a 17-bit reloc containing the small data area 17-bit signed offset and shift left by 2 for use in lwi.gp, swi.gp...

 -- BFD_RELOC_NDS32_SDA18S1:
     This is a 18-bit reloc containing the small data area 18-bit signed offset and shift left by 1 for use in lhi.gp, shi.gp...

 -- BFD_RELOC_NDS32_SDA19S0:
     This is a 19-bit reloc containing the small data area 19-bit signed offset and shift left by 0 for use in lbi.gp, sbi.gp...

 -- BFD_RELOC_NDS32_GOT20:
 -- BFD_RELOC_NDS32_9_PLTREL:
 -- BFD_RELOC_NDS32_25_PLTREL:
 -- BFD_RELOC_NDS32_COPY:
 -- BFD_RELOC_NDS32_GLOB_DAT:
 -- BFD_RELOC_NDS32_JMP_SLOT:
 -- BFD_RELOC_NDS32_RELATIVE:
 -- BFD_RELOC_NDS32_GOTOFF:
 -- BFD_RELOC_NDS32_GOTOFF_HI20:
 -- BFD_RELOC_NDS32_GOTOFF_LO12:
 -- BFD_RELOC_NDS32_GOTPC20:
 -- BFD_RELOC_NDS32_GOT_HI20:
 -- BFD_RELOC_NDS32_GOT_LO12:
 -- BFD_RELOC_NDS32_GOTPC_HI20:
 -- BFD_RELOC_NDS32_GOTPC_LO12:
     for PIC

 -- BFD_RELOC_NDS32_INSN16:
 -- BFD_RELOC_NDS32_LABEL:
 -- BFD_RELOC_NDS32_LONGCALL1:
 -- BFD_RELOC_NDS32_LONGCALL2:
 -- BFD_RELOC_NDS32_LONGCALL3:
 -- BFD_RELOC_NDS32_LONGJUMP1:
 -- BFD_RELOC_NDS32_LONGJUMP2:
 -- BFD_RELOC_NDS32_LONGJUMP3:
 -- BFD_RELOC_NDS32_LOADSTORE:
 -- BFD_RELOC_NDS32_9_FIXED:
 -- BFD_RELOC_NDS32_15_FIXED:
 -- BFD_RELOC_NDS32_17_FIXED:
 -- BFD_RELOC_NDS32_25_FIXED:
 -- BFD_RELOC_NDS32_LONGCALL4:
 -- BFD_RELOC_NDS32_LONGCALL5:
 -- BFD_RELOC_NDS32_LONGCALL6:
 -- BFD_RELOC_NDS32_LONGJUMP4:
 -- BFD_RELOC_NDS32_LONGJUMP5:
 -- BFD_RELOC_NDS32_LONGJUMP6:
 -- BFD_RELOC_NDS32_LONGJUMP7:
     for relax

 -- BFD_RELOC_NDS32_PLTREL_HI20:
 -- BFD_RELOC_NDS32_PLTREL_LO12:
 -- BFD_RELOC_NDS32_PLT_GOTREL_HI20:
 -- BFD_RELOC_NDS32_PLT_GOTREL_LO12:
     for PIC

 -- BFD_RELOC_NDS32_SDA12S2_DP:
 -- BFD_RELOC_NDS32_SDA12S2_SP:
 -- BFD_RELOC_NDS32_LO12S2_DP:
 -- BFD_RELOC_NDS32_LO12S2_SP:
     for floating point

 -- BFD_RELOC_NDS32_DWARF2_OP1:
 -- BFD_RELOC_NDS32_DWARF2_OP2:
 -- BFD_RELOC_NDS32_DWARF2_LEB:
     for dwarf2 debug_line.

 -- BFD_RELOC_NDS32_UPDATE_TA:
     for eliminate 16-bit instructions

 -- BFD_RELOC_NDS32_PLT_GOTREL_LO20:
 -- BFD_RELOC_NDS32_PLT_GOTREL_LO15:
 -- BFD_RELOC_NDS32_PLT_GOTREL_LO19:
 -- BFD_RELOC_NDS32_GOT_LO15:
 -- BFD_RELOC_NDS32_GOT_LO19:
 -- BFD_RELOC_NDS32_GOTOFF_LO15:
 -- BFD_RELOC_NDS32_GOTOFF_LO19:
 -- BFD_RELOC_NDS32_GOT15S2:
 -- BFD_RELOC_NDS32_GOT17S2:
     for PIC object relaxation

 -- BFD_RELOC_NDS32_5:
     NDS32 relocs. This is a 5 bit absolute address.

 -- BFD_RELOC_NDS32_10_UPCREL:
     This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.

 -- BFD_RELOC_NDS32_SDA_FP7U2_RELA:
     If fp were omitted, fp can used as another gp.

 -- BFD_RELOC_NDS32_RELAX_ENTRY:
 -- BFD_RELOC_NDS32_GOT_SUFF:
 -- BFD_RELOC_NDS32_GOTOFF_SUFF:
 -- BFD_RELOC_NDS32_PLT_GOT_SUFF:
 -- BFD_RELOC_NDS32_MULCALL_SUFF:
 -- BFD_RELOC_NDS32_PTR:
 -- BFD_RELOC_NDS32_PTR_COUNT:
 -- BFD_RELOC_NDS32_PTR_RESOLVED:
 -- BFD_RELOC_NDS32_PLTBLOCK:
 -- BFD_RELOC_NDS32_RELAX_REGION_BEGIN:
 -- BFD_RELOC_NDS32_RELAX_REGION_END:
 -- BFD_RELOC_NDS32_MINUEND:
 -- BFD_RELOC_NDS32_SUBTRAHEND:
 -- BFD_RELOC_NDS32_DIFF8:
 -- BFD_RELOC_NDS32_DIFF16:
 -- BFD_RELOC_NDS32_DIFF32:
 -- BFD_RELOC_NDS32_DIFF_ULEB128:
 -- BFD_RELOC_NDS32_EMPTY:
     relaxation relative relocation types

 -- BFD_RELOC_NDS32_25_ABS:
     This is a 25 bit absolute address.

 -- BFD_RELOC_NDS32_DATA:
 -- BFD_RELOC_NDS32_TRAN:
 -- BFD_RELOC_NDS32_17IFC_PCREL:
 -- BFD_RELOC_NDS32_10IFCU_PCREL:
     For ex9 and ifc using.

 -- BFD_RELOC_NDS32_TPOFF:
 -- BFD_RELOC_NDS32_GOTTPOFF:
 -- BFD_RELOC_NDS32_TLS_LE_HI20:
 -- BFD_RELOC_NDS32_TLS_LE_LO12:
 -- BFD_RELOC_NDS32_TLS_LE_20:
 -- BFD_RELOC_NDS32_TLS_LE_15S0:
 -- BFD_RELOC_NDS32_TLS_LE_15S1:
 -- BFD_RELOC_NDS32_TLS_LE_15S2:
 -- BFD_RELOC_NDS32_TLS_LE_ADD:
 -- BFD_RELOC_NDS32_TLS_LE_LS:
 -- BFD_RELOC_NDS32_TLS_IE_HI20:
 -- BFD_RELOC_NDS32_TLS_IE_LO12:
 -- BFD_RELOC_NDS32_TLS_IE_LO12S2:
 -- BFD_RELOC_NDS32_TLS_IEGP_HI20:
 -- BFD_RELOC_NDS32_TLS_IEGP_LO12:
 -- BFD_RELOC_NDS32_TLS_IEGP_LO12S2:
 -- BFD_RELOC_NDS32_TLS_IEGP_LW:
 -- BFD_RELOC_NDS32_TLS_DESC:
 -- BFD_RELOC_NDS32_TLS_DESC_HI20:
 -- BFD_RELOC_NDS32_TLS_DESC_LO12:
 -- BFD_RELOC_NDS32_TLS_DESC_20:
 -- BFD_RELOC_NDS32_TLS_DESC_SDA17S2:
 -- BFD_RELOC_NDS32_TLS_DESC_ADD:
 -- BFD_RELOC_NDS32_TLS_DESC_FUNC:
 -- BFD_RELOC_NDS32_TLS_DESC_CALL:
 -- BFD_RELOC_NDS32_TLS_DESC_MEM:
 -- BFD_RELOC_NDS32_REMOVE:
 -- BFD_RELOC_NDS32_GROUP:
     For TLS.

 -- BFD_RELOC_NDS32_LSI:
     For floating load store relaxation.

 -- BFD_RELOC_V850_9_PCREL:
     This is a 9-bit reloc

 -- BFD_RELOC_V850_22_PCREL:
     This is a 22-bit reloc

 -- BFD_RELOC_V850_SDA_16_16_OFFSET:
     This is a 16 bit offset from the short data area pointer.

 -- BFD_RELOC_V850_SDA_15_16_OFFSET:
     This is a 16 bit offset (of which only 15 bits are used) from the short data area pointer.

 -- BFD_RELOC_V850_ZDA_16_16_OFFSET:
     This is a 16 bit offset from the zero data area pointer.

 -- BFD_RELOC_V850_ZDA_15_16_OFFSET:
     This is a 16 bit offset (of which only 15 bits are used) from the zero data area pointer.

 -- BFD_RELOC_V850_TDA_6_8_OFFSET:
     This is an 8 bit offset (of which only 6 bits are used) from the tiny data area pointer.

 -- BFD_RELOC_V850_TDA_7_8_OFFSET:
     This is an 8bit offset (of which only 7 bits are used) from the tiny data area pointer.

 -- BFD_RELOC_V850_TDA_7_7_OFFSET:
     This is a 7 bit offset from the tiny data area pointer.

 -- BFD_RELOC_V850_TDA_16_16_OFFSET:
     This is a 16 bit offset from the tiny data area pointer.

 -- BFD_RELOC_V850_TDA_4_5_OFFSET:
     This is a 5 bit offset (of which only 4 bits are used) from the tiny data area pointer.

 -- BFD_RELOC_V850_TDA_4_4_OFFSET:
     This is a 4 bit offset from the tiny data area pointer.

 -- BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET:
     This is a 16 bit offset from the short data area pointer, with the bits placed non-contiguously in the instruction.

 -- BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET:
     This is a 16 bit offset from the zero data area pointer, with the bits placed non-contiguously in the instruction.

 -- BFD_RELOC_V850_CALLT_6_7_OFFSET:
     This is a 6 bit offset from the call table base pointer.

 -- BFD_RELOC_V850_CALLT_16_16_OFFSET:
     This is a 16 bit offset from the call table base pointer.

 -- BFD_RELOC_V850_LONGCALL:
     Used for relaxing indirect function calls.

 -- BFD_RELOC_V850_LONGJUMP:
     Used for relaxing indirect jumps.

 -- BFD_RELOC_V850_ALIGN:
     Used to maintain alignment whilst relaxing.

 -- BFD_RELOC_V850_LO16_SPLIT_OFFSET:
     This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu instructions.

 -- BFD_RELOC_V850_16_PCREL:
     This is a 16-bit reloc.

 -- BFD_RELOC_V850_17_PCREL:
     This is a 17-bit reloc.

 -- BFD_RELOC_V850_23:
     This is a 23-bit reloc.

 -- BFD_RELOC_V850_32_PCREL:
     This is a 32-bit reloc.

 -- BFD_RELOC_V850_32_ABS:
     This is a 32-bit reloc.

 -- BFD_RELOC_V850_16_SPLIT_OFFSET:
     This is a 16-bit reloc.

 -- BFD_RELOC_V850_16_S1:
     This is a 16-bit reloc.

 -- BFD_RELOC_V850_LO16_S1:
     Low 16 bits. 16 bit shifted by 1.

 -- BFD_RELOC_V850_CALLT_15_16_OFFSET:
     This is a 16 bit offset from the call table base pointer.

 -- BFD_RELOC_V850_32_GOTPCREL:
     DSO relocations.

 -- BFD_RELOC_V850_16_GOT:
     DSO relocations.

 -- BFD_RELOC_V850_32_GOT:
     DSO relocations.

 -- BFD_RELOC_V850_22_PLT_PCREL:
     DSO relocations.

 -- BFD_RELOC_V850_32_PLT_PCREL:
     DSO relocations.

 -- BFD_RELOC_V850_COPY:
     DSO relocations.

 -- BFD_RELOC_V850_GLOB_DAT:
     DSO relocations.

 -- BFD_RELOC_V850_JMP_SLOT:
     DSO relocations.

 -- BFD_RELOC_V850_RELATIVE:
     DSO relocations.

 -- BFD_RELOC_V850_16_GOTOFF:
     DSO relocations.

 -- BFD_RELOC_V850_32_GOTOFF:
     DSO relocations.

 -- BFD_RELOC_V850_CODE:
     start code.

 -- BFD_RELOC_V850_DATA:
     start data in text.

 -- BFD_RELOC_TIC30_LDP:
     This is a 8bit DP reloc for the tms320c30, where the most significant 8 bits of a 24 bit word are placed into the least significant 8 bits of the opcode.

 -- BFD_RELOC_TIC54X_PARTLS7:
     This is a 7bit reloc for the tms320c54x, where the least significant 7 bits of a 16 bit word are placed into the least significant 7 bits of the opcode.

 -- BFD_RELOC_TIC54X_PARTMS9:
     This is a 9bit DP reloc for the tms320c54x, where the most significant 9 bits of a 16 bit word are placed into the least significant 9 bits of the opcode.

 -- BFD_RELOC_TIC54X_23:
     This is an extended address 23-bit reloc for the tms320c54x.

 -- BFD_RELOC_TIC54X_16_OF_23:
     This is a 16-bit reloc for the tms320c54x, where the least significant 16 bits of a 23-bit extended address are placed into the opcode.

 -- BFD_RELOC_TIC54X_MS7_OF_23:
     This is a reloc for the tms320c54x, where the most significant 7 bits of a 23-bit extended address are placed into the opcode.

 -- BFD_RELOC_C6000_PCR_S21:
 -- BFD_RELOC_C6000_PCR_S12:
 -- BFD_RELOC_C6000_PCR_S10:
 -- BFD_RELOC_C6000_PCR_S7:
 -- BFD_RELOC_C6000_ABS_S16:
 -- BFD_RELOC_C6000_ABS_L16:
 -- BFD_RELOC_C6000_ABS_H16:
 -- BFD_RELOC_C6000_SBR_U15_B:
 -- BFD_RELOC_C6000_SBR_U15_H:
 -- BFD_RELOC_C6000_SBR_U15_W:
 -- BFD_RELOC_C6000_SBR_S16:
 -- BFD_RELOC_C6000_SBR_L16_B:
 -- BFD_RELOC_C6000_SBR_L16_H:
 -- BFD_RELOC_C6000_SBR_L16_W:
 -- BFD_RELOC_C6000_SBR_H16_B:
 -- BFD_RELOC_C6000_SBR_H16_H:
 -- BFD_RELOC_C6000_SBR_H16_W:
 -- BFD_RELOC_C6000_SBR_GOT_U15_W:
 -- BFD_RELOC_C6000_SBR_GOT_L16_W:
 -- BFD_RELOC_C6000_SBR_GOT_H16_W:
 -- BFD_RELOC_C6000_DSBT_INDEX:
 -- BFD_RELOC_C6000_PREL31:
 -- BFD_RELOC_C6000_COPY:
 -- BFD_RELOC_C6000_JUMP_SLOT:
 -- BFD_RELOC_C6000_EHTYPE:
 -- BFD_RELOC_C6000_PCR_H16:
 -- BFD_RELOC_C6000_PCR_L16:
 -- BFD_RELOC_C6000_ALIGN:
 -- BFD_RELOC_C6000_FPHEAD:
 -- BFD_RELOC_C6000_NOCMP:
     TMS320C6000 relocations.

 -- BFD_RELOC_FR30_48:
     This is a 48 bit reloc for the FR30 that stores 32 bits.

 -- BFD_RELOC_FR30_20:
     This is a 32 bit reloc for the FR30 that stores 20 bits split up into two sections.

 -- BFD_RELOC_FR30_6_IN_4:
     This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in 4 bits.

 -- BFD_RELOC_FR30_8_IN_8:
     This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset into 8 bits.

 -- BFD_RELOC_FR30_9_IN_8:
     This is a 16 bit reloc for the FR30 that stores a 9 bit short offset into 8 bits.

 -- BFD_RELOC_FR30_10_IN_8:
     This is a 16 bit reloc for the FR30 that stores a 10 bit word offset into 8 bits.

 -- BFD_RELOC_FR30_9_PCREL:
     This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative short offset into 8 bits.

 -- BFD_RELOC_FR30_12_PCREL:
     This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative short offset into 11 bits.

 -- BFD_RELOC_MCORE_PCREL_IMM8BY4:
 -- BFD_RELOC_MCORE_PCREL_IMM11BY2:
 -- BFD_RELOC_MCORE_PCREL_IMM4BY2:
 -- BFD_RELOC_MCORE_PCREL_32:
 -- BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2:
 -- BFD_RELOC_MCORE_RVA:
     Motorola Mcore relocations.

 -- BFD_RELOC_MEP_8:
 -- BFD_RELOC_MEP_16:
 -- BFD_RELOC_MEP_32:
 -- BFD_RELOC_MEP_PCREL8A2:
 -- BFD_RELOC_MEP_PCREL12A2:
 -- BFD_RELOC_MEP_PCREL17A2:
 -- BFD_RELOC_MEP_PCREL24A2:
 -- BFD_RELOC_MEP_PCABS24A2:
 -- BFD_RELOC_MEP_LOW16:
 -- BFD_RELOC_MEP_HI16U:
 -- BFD_RELOC_MEP_HI16S:
 -- BFD_RELOC_MEP_GPREL:
 -- BFD_RELOC_MEP_TPREL:
 -- BFD_RELOC_MEP_TPREL7:
 -- BFD_RELOC_MEP_TPREL7A2:
 -- BFD_RELOC_MEP_TPREL7A4:
 -- BFD_RELOC_MEP_UIMM24:
 -- BFD_RELOC_MEP_ADDR24A4:
 -- BFD_RELOC_MEP_GNU_VTINHERIT:
 -- BFD_RELOC_MEP_GNU_VTENTRY:
     Toshiba Media Processor Relocations.

 -- BFD_RELOC_METAG_HIADDR16:
 -- BFD_RELOC_METAG_LOADDR16:
 -- BFD_RELOC_METAG_RELBRANCH:
 -- BFD_RELOC_METAG_GETSETOFF:
 -- BFD_RELOC_METAG_HIOG:
 -- BFD_RELOC_METAG_LOOG:
 -- BFD_RELOC_METAG_REL8:
 -- BFD_RELOC_METAG_REL16:
 -- BFD_RELOC_METAG_HI16_GOTOFF:
 -- BFD_RELOC_METAG_LO16_GOTOFF:
 -- BFD_RELOC_METAG_GETSET_GOTOFF:
 -- BFD_RELOC_METAG_GETSET_GOT:
 -- BFD_RELOC_METAG_HI16_GOTPC:
 -- BFD_RELOC_METAG_LO16_GOTPC:
 -- BFD_RELOC_METAG_HI16_PLT:
 -- BFD_RELOC_METAG_LO16_PLT:
 -- BFD_RELOC_METAG_RELBRANCH_PLT:
 -- BFD_RELOC_METAG_GOTOFF:
 -- BFD_RELOC_METAG_PLT:
 -- BFD_RELOC_METAG_COPY:
 -- BFD_RELOC_METAG_JMP_SLOT:
 -- BFD_RELOC_METAG_RELATIVE:
 -- BFD_RELOC_METAG_GLOB_DAT:
 -- BFD_RELOC_METAG_TLS_GD:
 -- BFD_RELOC_METAG_TLS_LDM:
 -- BFD_RELOC_METAG_TLS_LDO_HI16:
 -- BFD_RELOC_METAG_TLS_LDO_LO16:
 -- BFD_RELOC_METAG_TLS_LDO:
 -- BFD_RELOC_METAG_TLS_IE:
 -- BFD_RELOC_METAG_TLS_IENONPIC:
 -- BFD_RELOC_METAG_TLS_IENONPIC_HI16:
 -- BFD_RELOC_METAG_TLS_IENONPIC_LO16:
 -- BFD_RELOC_METAG_TLS_TPOFF:
 -- BFD_RELOC_METAG_TLS_DTPMOD:
 -- BFD_RELOC_METAG_TLS_DTPOFF:
 -- BFD_RELOC_METAG_TLS_LE:
 -- BFD_RELOC_METAG_TLS_LE_HI16:
 -- BFD_RELOC_METAG_TLS_LE_LO16:
     Imagination Technologies Meta relocations.

 -- BFD_RELOC_MMIX_GETA:
 -- BFD_RELOC_MMIX_GETA_1:
 -- BFD_RELOC_MMIX_GETA_2:
 -- BFD_RELOC_MMIX_GETA_3:
     These are relocations for the GETA instruction.

 -- BFD_RELOC_MMIX_CBRANCH:
 -- BFD_RELOC_MMIX_CBRANCH_J:
 -- BFD_RELOC_MMIX_CBRANCH_1:
 -- BFD_RELOC_MMIX_CBRANCH_2:
 -- BFD_RELOC_MMIX_CBRANCH_3:
     These are relocations for a conditional branch instruction.

 -- BFD_RELOC_MMIX_PUSHJ:
 -- BFD_RELOC_MMIX_PUSHJ_1:
 -- BFD_RELOC_MMIX_PUSHJ_2:
 -- BFD_RELOC_MMIX_PUSHJ_3:
 -- BFD_RELOC_MMIX_PUSHJ_STUBBABLE:
     These are relocations for the PUSHJ instruction.

 -- BFD_RELOC_MMIX_JMP:
 -- BFD_RELOC_MMIX_JMP_1:
 -- BFD_RELOC_MMIX_JMP_2:
 -- BFD_RELOC_MMIX_JMP_3:
     These are relocations for the JMP instruction.

 -- BFD_RELOC_MMIX_ADDR19:
     This is a relocation for a relative address as in a GETA instruction or a branch.

 -- BFD_RELOC_MMIX_ADDR27:
     This is a relocation for a relative address as in a JMP instruction.

 -- BFD_RELOC_MMIX_REG_OR_BYTE:
     This is a relocation for an instruction field that may be a general register or a value 0..255.

 -- BFD_RELOC_MMIX_REG:
     This is a relocation for an instruction field that may be a general register.

 -- BFD_RELOC_MMIX_BASE_PLUS_OFFSET:
     This is a relocation for two instruction fields holding a register and an offset, the equivalent of the relocation.

 -- BFD_RELOC_MMIX_LOCAL:
     This relocation is an assertion that the expression is not allocated as a global register.  It does not modify contents.

 -- BFD_RELOC_AVR_7_PCREL:
     This is a 16 bit reloc for the AVR that stores 8 bit pc relative short offset into 7 bits.

 -- BFD_RELOC_AVR_13_PCREL:
     This is a 16 bit reloc for the AVR that stores 13 bit pc relative short offset into 12 bits.

 -- BFD_RELOC_AVR_16_PM:
     This is a 16 bit reloc for the AVR that stores 17 bit value (usually program memory address) into 16 bits.

 -- BFD_RELOC_AVR_LO8_LDI:
     This is a 16 bit reloc for the AVR that stores 8 bit value (usually data memory address) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_HI8_LDI:
     This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit of data memory address) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_HH8_LDI:
     This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit of program memory address) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_MS8_LDI:
     This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit of 32 bit value) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_LO8_LDI_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (usually data memory address) into 8 bit immediate value of SUBI insn.

 -- BFD_RELOC_AVR_HI8_LDI_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (high 8 bit of data memory address) into 8 bit immediate value of SUBI insn.

 -- BFD_RELOC_AVR_HH8_LDI_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (most high 8 bit of program memory address) into 8 bit immediate value of LDI or SUBI insn.

 -- BFD_RELOC_AVR_MS8_LDI_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb of 32 bit value) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_LO8_LDI_PM:
     This is a 16 bit reloc for the AVR that stores 8 bit value (usually command address) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_LO8_LDI_GS:
     This is a 16 bit reloc for the AVR that stores 8 bit value (command address) into 8 bit immediate value of LDI insn. If the address is beyond the 128k boundary, the linker inserts a jump stub for this reloc in the lower 128k.

 -- BFD_RELOC_AVR_HI8_LDI_PM:
     This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit of command address) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_HI8_LDI_GS:
     This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit of command address) into 8 bit immediate value of LDI insn.  If the address is beyond the 128k boundary, the linker inserts a jump stub for this reloc below 128k.

 -- BFD_RELOC_AVR_HH8_LDI_PM:
     This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit of command address) into 8 bit immediate value of LDI insn.

 -- BFD_RELOC_AVR_LO8_LDI_PM_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (usually command address) into 8 bit immediate value of SUBI insn.

 -- BFD_RELOC_AVR_HI8_LDI_PM_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (high 8 bit of 16 bit command address) into 8 bit immediate value of SUBI insn.

 -- BFD_RELOC_AVR_HH8_LDI_PM_NEG:
     This is a 16 bit reloc for the AVR that stores negated 8 bit value (high 6 bit of 22 bit command address) into 8 bit immediate value of SUBI insn.

 -- BFD_RELOC_AVR_CALL:
     This is a 32 bit reloc for the AVR that stores 23 bit value into 22 bits.

 -- BFD_RELOC_AVR_LDI:
     This is a 16 bit reloc for the AVR that stores all needed bits for absolute addressing with ldi with overflow check to linktime

 -- BFD_RELOC_AVR_6:
     This is a 6 bit reloc for the AVR that stores offset for ldd/std instructions

 -- BFD_RELOC_AVR_6_ADIW:
     This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw instructions

 -- BFD_RELOC_AVR_8_LO:
     This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol in .byte lo8(symbol)

 -- BFD_RELOC_AVR_8_HI:
     This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol in .byte hi8(symbol)

 -- BFD_RELOC_AVR_8_HLO:
     This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol in .byte hlo8(symbol)

 -- BFD_RELOC_AVR_DIFF8:
 -- BFD_RELOC_AVR_DIFF16:
 -- BFD_RELOC_AVR_DIFF32:
     AVR relocations to mark the difference of two local symbols. These are only needed to support linker relaxation and can be ignored when not relaxing.  The field is set to the value of the difference assuming no relaxation.  The relocation encodes the position of the second symbol so the linker can determine whether to adjust the field value.

 -- BFD_RELOC_AVR_LDS_STS_16:
     This is a 7 bit reloc for the AVR that stores SRAM address for 16bit lds and sts instructions supported only tiny core.

 -- BFD_RELOC_AVR_PORT6:
     This is a 6 bit reloc for the AVR that stores an I/O register number for the IN and OUT instructions

 -- BFD_RELOC_AVR_PORT5:
     This is a 5 bit reloc for the AVR that stores an I/O register number for the SBIC, SBIS, SBI and CBI instructions

 -- BFD_RELOC_RISCV_HI20:
 -- BFD_RELOC_RISCV_PCREL_HI20:
 -- BFD_RELOC_RISCV_PCREL_LO12_I:
 -- BFD_RELOC_RISCV_PCREL_LO12_S:
 -- BFD_RELOC_RISCV_LO12_I:
 -- BFD_RELOC_RISCV_LO12_S:
 -- BFD_RELOC_RISCV_GPREL12_I:
 -- BFD_RELOC_RISCV_GPREL12_S:
 -- BFD_RELOC_RISCV_TPREL_HI20:
 -- BFD_RELOC_RISCV_TPREL_LO12_I:
 -- BFD_RELOC_RISCV_TPREL_LO12_S:
 -- BFD_RELOC_RISCV_TPREL_ADD:
 -- BFD_RELOC_RISCV_CALL:
 -- BFD_RELOC_RISCV_CALL_PLT:
 -- BFD_RELOC_RISCV_ADD8:
 -- BFD_RELOC_RISCV_ADD16:
 -- BFD_RELOC_RISCV_ADD32:
 -- BFD_RELOC_RISCV_ADD64:
 -- BFD_RELOC_RISCV_SUB8:
 -- BFD_RELOC_RISCV_SUB16:
 -- BFD_RELOC_RISCV_SUB32:
 -- BFD_RELOC_RISCV_SUB64:
 -- BFD_RELOC_RISCV_GOT_HI20:
 -- BFD_RELOC_RISCV_TLS_GOT_HI20:
 -- BFD_RELOC_RISCV_TLS_GD_HI20:
 -- BFD_RELOC_RISCV_JMP:
 -- BFD_RELOC_RISCV_TLS_DTPMOD32:
 -- BFD_RELOC_RISCV_TLS_DTPREL32:
 -- BFD_RELOC_RISCV_TLS_DTPMOD64:
 -- BFD_RELOC_RISCV_TLS_DTPREL64:
 -- BFD_RELOC_RISCV_TLS_TPREL32:
 -- BFD_RELOC_RISCV_TLS_TPREL64:
 -- BFD_RELOC_RISCV_ALIGN:
 -- BFD_RELOC_RISCV_RVC_BRANCH:
 -- BFD_RELOC_RISCV_RVC_JUMP:
 -- BFD_RELOC_RISCV_RVC_LUI:
 -- BFD_RELOC_RISCV_GPREL_I:
 -- BFD_RELOC_RISCV_GPREL_S:
 -- BFD_RELOC_RISCV_TPREL_I:
 -- BFD_RELOC_RISCV_TPREL_S:
 -- BFD_RELOC_RISCV_RELAX:
 -- BFD_RELOC_RISCV_CFA:
 -- BFD_RELOC_RISCV_SUB6:
 -- BFD_RELOC_RISCV_SET6:
 -- BFD_RELOC_RISCV_SET8:
 -- BFD_RELOC_RISCV_SET16:
 -- BFD_RELOC_RISCV_SET32:
 -- BFD_RELOC_RISCV_32_PCREL:
     RISC-V relocations.

 -- BFD_RELOC_RL78_NEG8:
 -- BFD_RELOC_RL78_NEG16:
 -- BFD_RELOC_RL78_NEG24:
 -- BFD_RELOC_RL78_NEG32:
 -- BFD_RELOC_RL78_16_OP:
 -- BFD_RELOC_RL78_24_OP:
 -- BFD_RELOC_RL78_32_OP:
 -- BFD_RELOC_RL78_8U:
 -- BFD_RELOC_RL78_16U:
 -- BFD_RELOC_RL78_24U:
 -- BFD_RELOC_RL78_DIR3U_PCREL:
 -- BFD_RELOC_RL78_DIFF:
 -- BFD_RELOC_RL78_GPRELB:
 -- BFD_RELOC_RL78_GPRELW:
 -- BFD_RELOC_RL78_GPRELL:
 -- BFD_RELOC_RL78_SYM:
 -- BFD_RELOC_RL78_OP_SUBTRACT:
 -- BFD_RELOC_RL78_OP_NEG:
 -- BFD_RELOC_RL78_OP_AND:
 -- BFD_RELOC_RL78_OP_SHRA:
 -- BFD_RELOC_RL78_ABS8:
 -- BFD_RELOC_RL78_ABS16:
 -- BFD_RELOC_RL78_ABS16_REV:
 -- BFD_RELOC_RL78_ABS32:
 -- BFD_RELOC_RL78_ABS32_REV:
 -- BFD_RELOC_RL78_ABS16U:
 -- BFD_RELOC_RL78_ABS16UW:
 -- BFD_RELOC_RL78_ABS16UL:
 -- BFD_RELOC_RL78_RELAX:
 -- BFD_RELOC_RL78_HI16:
 -- BFD_RELOC_RL78_HI8:
 -- BFD_RELOC_RL78_LO16:
 -- BFD_RELOC_RL78_CODE:
 -- BFD_RELOC_RL78_SADDR:
     Renesas RL78 Relocations.

 -- BFD_RELOC_RX_NEG8:
 -- BFD_RELOC_RX_NEG16:
 -- BFD_RELOC_RX_NEG24:
 -- BFD_RELOC_RX_NEG32:
 -- BFD_RELOC_RX_16_OP:
 -- BFD_RELOC_RX_24_OP:
 -- BFD_RELOC_RX_32_OP:
 -- BFD_RELOC_RX_8U:
 -- BFD_RELOC_RX_16U:
 -- BFD_RELOC_RX_24U:
 -- BFD_RELOC_RX_DIR3U_PCREL:
 -- BFD_RELOC_RX_DIFF:
 -- BFD_RELOC_RX_GPRELB:
 -- BFD_RELOC_RX_GPRELW:
 -- BFD_RELOC_RX_GPRELL:
 -- BFD_RELOC_RX_SYM:
 -- BFD_RELOC_RX_OP_SUBTRACT:
 -- BFD_RELOC_RX_OP_NEG:
 -- BFD_RELOC_RX_ABS8:
 -- BFD_RELOC_RX_ABS16:
 -- BFD_RELOC_RX_ABS16_REV:
 -- BFD_RELOC_RX_ABS32:
 -- BFD_RELOC_RX_ABS32_REV:
 -- BFD_RELOC_RX_ABS16U:
 -- BFD_RELOC_RX_ABS16UW:
 -- BFD_RELOC_RX_ABS16UL:
 -- BFD_RELOC_RX_RELAX:
     Renesas RX Relocations.

 -- BFD_RELOC_390_12:
     Direct 12 bit.

 -- BFD_RELOC_390_GOT12:
     12 bit GOT offset.

 -- BFD_RELOC_390_PLT32:
     32 bit PC relative PLT address.

 -- BFD_RELOC_390_COPY:
     Copy symbol at runtime.

 -- BFD_RELOC_390_GLOB_DAT:
     Create GOT entry.

 -- BFD_RELOC_390_JMP_SLOT:
     Create PLT entry.

 -- BFD_RELOC_390_RELATIVE:
     Adjust by program base.

 -- BFD_RELOC_390_GOTPC:
     32 bit PC relative offset to GOT.

 -- BFD_RELOC_390_GOT16:
     16 bit GOT offset.

 -- BFD_RELOC_390_PC12DBL:
     PC relative 12 bit shifted by 1.

 -- BFD_RELOC_390_PLT12DBL:
     12 bit PC rel. PLT shifted by 1.

 -- BFD_RELOC_390_PC16DBL:
     PC relative 16 bit shifted by 1.

 -- BFD_RELOC_390_PLT16DBL:
     16 bit PC rel. PLT shifted by 1.

 -- BFD_RELOC_390_PC24DBL:
     PC relative 24 bit shifted by 1.

 -- BFD_RELOC_390_PLT24DBL:
     24 bit PC rel. PLT shifted by 1.

 -- BFD_RELOC_390_PC32DBL:
     PC relative 32 bit shifted by 1.

 -- BFD_RELOC_390_PLT32DBL:
     32 bit PC rel. PLT shifted by 1.

 -- BFD_RELOC_390_GOTPCDBL:
     32 bit PC rel. GOT shifted by 1.

 -- BFD_RELOC_390_GOT64:
     64 bit GOT offset.

 -- BFD_RELOC_390_PLT64:
     64 bit PC relative PLT address.

 -- BFD_RELOC_390_GOTENT:
     32 bit rel. offset to GOT entry.

 -- BFD_RELOC_390_GOTOFF64:
     64 bit offset to GOT.

 -- BFD_RELOC_390_GOTPLT12:
     12-bit offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_390_GOTPLT16:
     16-bit offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_390_GOTPLT32:
     32-bit offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_390_GOTPLT64:
     64-bit offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_390_GOTPLTENT:
     32-bit rel. offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_390_PLTOFF16:
     16-bit rel. offset from the GOT to a PLT entry.

 -- BFD_RELOC_390_PLTOFF32:
     32-bit rel. offset from the GOT to a PLT entry.

 -- BFD_RELOC_390_PLTOFF64:
     64-bit rel. offset from the GOT to a PLT entry.

 -- BFD_RELOC_390_TLS_LOAD:
 -- BFD_RELOC_390_TLS_GDCALL:
 -- BFD_RELOC_390_TLS_LDCALL:
 -- BFD_RELOC_390_TLS_GD32:
 -- BFD_RELOC_390_TLS_GD64:
 -- BFD_RELOC_390_TLS_GOTIE12:
 -- BFD_RELOC_390_TLS_GOTIE32:
 -- BFD_RELOC_390_TLS_GOTIE64:
 -- BFD_RELOC_390_TLS_LDM32:
 -- BFD_RELOC_390_TLS_LDM64:
 -- BFD_RELOC_390_TLS_IE32:
 -- BFD_RELOC_390_TLS_IE64:
 -- BFD_RELOC_390_TLS_IEENT:
 -- BFD_RELOC_390_TLS_LE32:
 -- BFD_RELOC_390_TLS_LE64:
 -- BFD_RELOC_390_TLS_LDO32:
 -- BFD_RELOC_390_TLS_LDO64:
 -- BFD_RELOC_390_TLS_DTPMOD:
 -- BFD_RELOC_390_TLS_DTPOFF:
 -- BFD_RELOC_390_TLS_TPOFF:
     s390 tls relocations.

 -- BFD_RELOC_390_20:
 -- BFD_RELOC_390_GOT20:
 -- BFD_RELOC_390_GOTPLT20:
 -- BFD_RELOC_390_TLS_GOTIE20:
     Long displacement extension.

 -- BFD_RELOC_390_IRELATIVE:
     STT_GNU_IFUNC relocation.

 -- BFD_RELOC_SCORE_GPREL15:
     Score relocations Low 16 bit for load/store

 -- BFD_RELOC_SCORE_DUMMY2:
 -- BFD_RELOC_SCORE_JMP:
     This is a 24-bit reloc with the right 1 bit assumed to be 0

 -- BFD_RELOC_SCORE_BRANCH:
     This is a 19-bit reloc with the right 1 bit assumed to be 0

 -- BFD_RELOC_SCORE_IMM30:
     This is a 32-bit reloc for 48-bit instructions.

 -- BFD_RELOC_SCORE_IMM32:
     This is a 32-bit reloc for 48-bit instructions.

 -- BFD_RELOC_SCORE16_JMP:
     This is a 11-bit reloc with the right 1 bit assumed to be 0

 -- BFD_RELOC_SCORE16_BRANCH:
     This is a 8-bit reloc with the right 1 bit assumed to be 0

 -- BFD_RELOC_SCORE_BCMP:
     This is a 9-bit reloc with the right 1 bit assumed to be 0

 -- BFD_RELOC_SCORE_GOT15:
 -- BFD_RELOC_SCORE_GOT_LO16:
 -- BFD_RELOC_SCORE_CALL15:
 -- BFD_RELOC_SCORE_DUMMY_HI16:
     Undocumented Score relocs

 -- BFD_RELOC_IP2K_FR9:
     Scenix IP2K - 9-bit register number / data address

 -- BFD_RELOC_IP2K_BANK:
     Scenix IP2K - 4-bit register/data bank number

 -- BFD_RELOC_IP2K_ADDR16CJP:
     Scenix IP2K - low 13 bits of instruction word address

 -- BFD_RELOC_IP2K_PAGE3:
     Scenix IP2K - high 3 bits of instruction word address

 -- BFD_RELOC_IP2K_LO8DATA:
 -- BFD_RELOC_IP2K_HI8DATA:
 -- BFD_RELOC_IP2K_EX8DATA:
     Scenix IP2K - ext/low/high 8 bits of data address

 -- BFD_RELOC_IP2K_LO8INSN:
 -- BFD_RELOC_IP2K_HI8INSN:
     Scenix IP2K - low/high 8 bits of instruction word address

 -- BFD_RELOC_IP2K_PC_SKIP:
     Scenix IP2K - even/odd PC modifier to modify snb pcl.0

 -- BFD_RELOC_IP2K_TEXT:
     Scenix IP2K - 16 bit word address in text section.

 -- BFD_RELOC_IP2K_FR_OFFSET:
     Scenix IP2K - 7-bit sp or dp offset

 -- BFD_RELOC_VPE4KMATH_DATA:
 -- BFD_RELOC_VPE4KMATH_INSN:
     Scenix VPE4K coprocessor - data/insn-space addressing

 -- BFD_RELOC_VTABLE_INHERIT:
 -- BFD_RELOC_VTABLE_ENTRY:
     These two relocations are used by the linker to determine which of the entries in a C++ virtual function table are actually used.  When the --gc-sections option is given, the linker will zero out the entries that are not used, so that the code for those functions need not be included in the output.

     VTABLE_INHERIT is a zero-space relocation used to describe to the linker the inheritance tree of a C++ virtual function table.  The relocation's symbol should be the parent class' vtable, and the relocation should be located at the child vtable.

     VTABLE_ENTRY is a zero-space relocation that describes the use of a virtual function table entry.  The reloc's symbol should refer to the table of the class mentioned in the code.  Off of that base, an offset describes the entry that is being used.  For Rela hosts, this offset is stored in the reloc's addend.  For Rel hosts, we are forced to put this offset in the reloc's section offset.

 -- BFD_RELOC_IA64_IMM14:
 -- BFD_RELOC_IA64_IMM22:
 -- BFD_RELOC_IA64_IMM64:
 -- BFD_RELOC_IA64_DIR32MSB:
 -- BFD_RELOC_IA64_DIR32LSB:
 -- BFD_RELOC_IA64_DIR64MSB:
 -- BFD_RELOC_IA64_DIR64LSB:
 -- BFD_RELOC_IA64_GPREL22:
 -- BFD_RELOC_IA64_GPREL64I:
 -- BFD_RELOC_IA64_GPREL32MSB:
 -- BFD_RELOC_IA64_GPREL32LSB:
 -- BFD_RELOC_IA64_GPREL64MSB:
 -- BFD_RELOC_IA64_GPREL64LSB:
 -- BFD_RELOC_IA64_LTOFF22:
 -- BFD_RELOC_IA64_LTOFF64I:
 -- BFD_RELOC_IA64_PLTOFF22:
 -- BFD_RELOC_IA64_PLTOFF64I:
 -- BFD_RELOC_IA64_PLTOFF64MSB:
 -- BFD_RELOC_IA64_PLTOFF64LSB:
 -- BFD_RELOC_IA64_FPTR64I:
 -- BFD_RELOC_IA64_FPTR32MSB:
 -- BFD_RELOC_IA64_FPTR32LSB:
 -- BFD_RELOC_IA64_FPTR64MSB:
 -- BFD_RELOC_IA64_FPTR64LSB:
 -- BFD_RELOC_IA64_PCREL21B:
 -- BFD_RELOC_IA64_PCREL21BI:
 -- BFD_RELOC_IA64_PCREL21M:
 -- BFD_RELOC_IA64_PCREL21F:
 -- BFD_RELOC_IA64_PCREL22:
 -- BFD_RELOC_IA64_PCREL60B:
 -- BFD_RELOC_IA64_PCREL64I:
 -- BFD_RELOC_IA64_PCREL32MSB:
 -- BFD_RELOC_IA64_PCREL32LSB:
 -- BFD_RELOC_IA64_PCREL64MSB:
 -- BFD_RELOC_IA64_PCREL64LSB:
 -- BFD_RELOC_IA64_LTOFF_FPTR22:
 -- BFD_RELOC_IA64_LTOFF_FPTR64I:
 -- BFD_RELOC_IA64_LTOFF_FPTR32MSB:
 -- BFD_RELOC_IA64_LTOFF_FPTR32LSB:
 -- BFD_RELOC_IA64_LTOFF_FPTR64MSB:
 -- BFD_RELOC_IA64_LTOFF_FPTR64LSB:
 -- BFD_RELOC_IA64_SEGREL32MSB:
 -- BFD_RELOC_IA64_SEGREL32LSB:
 -- BFD_RELOC_IA64_SEGREL64MSB:
 -- BFD_RELOC_IA64_SEGREL64LSB:
 -- BFD_RELOC_IA64_SECREL32MSB:
 -- BFD_RELOC_IA64_SECREL32LSB:
 -- BFD_RELOC_IA64_SECREL64MSB:
 -- BFD_RELOC_IA64_SECREL64LSB:
 -- BFD_RELOC_IA64_REL32MSB:
 -- BFD_RELOC_IA64_REL32LSB:
 -- BFD_RELOC_IA64_REL64MSB:
 -- BFD_RELOC_IA64_REL64LSB:
 -- BFD_RELOC_IA64_LTV32MSB:
 -- BFD_RELOC_IA64_LTV32LSB:
 -- BFD_RELOC_IA64_LTV64MSB:
 -- BFD_RELOC_IA64_LTV64LSB:
 -- BFD_RELOC_IA64_IPLTMSB:
 -- BFD_RELOC_IA64_IPLTLSB:
 -- BFD_RELOC_IA64_COPY:
 -- BFD_RELOC_IA64_LTOFF22X:
 -- BFD_RELOC_IA64_LDXMOV:
 -- BFD_RELOC_IA64_TPREL14:
 -- BFD_RELOC_IA64_TPREL22:
 -- BFD_RELOC_IA64_TPREL64I:
 -- BFD_RELOC_IA64_TPREL64MSB:
 -- BFD_RELOC_IA64_TPREL64LSB:
 -- BFD_RELOC_IA64_LTOFF_TPREL22:
 -- BFD_RELOC_IA64_DTPMOD64MSB:
 -- BFD_RELOC_IA64_DTPMOD64LSB:
 -- BFD_RELOC_IA64_LTOFF_DTPMOD22:
 -- BFD_RELOC_IA64_DTPREL14:
 -- BFD_RELOC_IA64_DTPREL22:
 -- BFD_RELOC_IA64_DTPREL64I:
 -- BFD_RELOC_IA64_DTPREL32MSB:
 -- BFD_RELOC_IA64_DTPREL32LSB:
 -- BFD_RELOC_IA64_DTPREL64MSB:
 -- BFD_RELOC_IA64_DTPREL64LSB:
 -- BFD_RELOC_IA64_LTOFF_DTPREL22:
     Intel IA64 Relocations.

 -- BFD_RELOC_M68HC11_HI8:
     Motorola 68HC11 reloc. This is the 8 bit high part of an absolute address.

 -- BFD_RELOC_M68HC11_LO8:
     Motorola 68HC11 reloc. This is the 8 bit low part of an absolute address.

 -- BFD_RELOC_M68HC11_3B:
     Motorola 68HC11 reloc. This is the 3 bit of a value.

 -- BFD_RELOC_M68HC11_RL_JUMP:
     Motorola 68HC11 reloc. This reloc marks the beginning of a jump/call instruction. It is used for linker relaxation to correctly identify beginning of instruction and change some branches to use PC-relative addressing mode.

 -- BFD_RELOC_M68HC11_RL_GROUP:
     Motorola 68HC11 reloc. This reloc marks a group of several instructions that gcc generates and for which the linker relaxation pass can modify and/or remove some of them.

 -- BFD_RELOC_M68HC11_LO16:
     Motorola 68HC11 reloc. This is the 16-bit lower part of an address.  It is used for 'call' instruction to specify the symbol address without any special transformation (due to memory bank window).

 -- BFD_RELOC_M68HC11_PAGE:
     Motorola 68HC11 reloc. This is a 8-bit reloc that specifies the page number of an address. It is used by 'call' instruction to specify the page number of the symbol.

 -- BFD_RELOC_M68HC11_24:
     Motorola 68HC11 reloc. This is a 24-bit reloc that represents the address with a 16-bit value and a 8-bit page number.  The symbol address is transformed to follow the 16K memory bank of 68HC12 (seen as mapped in the window).

 -- BFD_RELOC_M68HC12_5B:
     Motorola 68HC12 reloc. This is the 5 bits of a value.

 -- BFD_RELOC_XGATE_RL_JUMP:
     Freescale XGATE reloc. This reloc marks the beginning of a bra/jal instruction.

 -- BFD_RELOC_XGATE_RL_GROUP:
     Freescale XGATE reloc. This reloc marks a group of several instructions that gcc generates and for which the linker relaxation pass can modify and/or remove some of them.

 -- BFD_RELOC_XGATE_LO16:
     Freescale XGATE reloc. This is the 16-bit lower part of an address.  It is used for the '16-bit' instructions.

 -- BFD_RELOC_XGATE_GPAGE:
     Freescale XGATE reloc.

 -- BFD_RELOC_XGATE_24:
     Freescale XGATE reloc.

 -- BFD_RELOC_XGATE_PCREL_9:
     Freescale XGATE reloc. This is a 9-bit pc-relative reloc.

 -- BFD_RELOC_XGATE_PCREL_10:
     Freescale XGATE reloc. This is a 10-bit pc-relative reloc.

 -- BFD_RELOC_XGATE_IMM8_LO:
     Freescale XGATE reloc. This is the 16-bit lower part of an address.  It is used for the '16-bit' instructions.

 -- BFD_RELOC_XGATE_IMM8_HI:
     Freescale XGATE reloc. This is the 16-bit higher part of an address.  It is used for the '16-bit' instructions.

 -- BFD_RELOC_XGATE_IMM3:
     Freescale XGATE reloc. This is a 3-bit pc-relative reloc.

 -- BFD_RELOC_XGATE_IMM4:
     Freescale XGATE reloc. This is a 4-bit pc-relative reloc.

 -- BFD_RELOC_XGATE_IMM5:
     Freescale XGATE reloc. This is a 5-bit pc-relative reloc.

 -- BFD_RELOC_M68HC12_9B:
     Motorola 68HC12 reloc. This is the 9 bits of a value.

 -- BFD_RELOC_M68HC12_16B:
     Motorola 68HC12 reloc. This is the 16 bits of a value.

 -- BFD_RELOC_M68HC12_9_PCREL:
     Motorola 68HC12/XGATE reloc. This is a PCREL9 branch.

 -- BFD_RELOC_M68HC12_10_PCREL:
     Motorola 68HC12/XGATE reloc. This is a PCREL10 branch.

 -- BFD_RELOC_M68HC12_LO8XG:
     Motorola 68HC12/XGATE reloc. This is the 8 bit low part of an absolute address and immediately precedes a matching HI8XG part.

 -- BFD_RELOC_M68HC12_HI8XG:
     Motorola 68HC12/XGATE reloc. This is the 8 bit high part of an absolute address and immediately follows a matching LO8XG part.

 -- BFD_RELOC_S12Z_15_PCREL:
     Freescale S12Z reloc. This is a 15 bit relative address.  If the most significant bits are all zero then it may be truncated to 8 bits.

 -- BFD_RELOC_CR16_NUM8:
 -- BFD_RELOC_CR16_NUM16:
 -- BFD_RELOC_CR16_NUM32:
 -- BFD_RELOC_CR16_NUM32a:
 -- BFD_RELOC_CR16_REGREL0:
 -- BFD_RELOC_CR16_REGREL4:
 -- BFD_RELOC_CR16_REGREL4a:
 -- BFD_RELOC_CR16_REGREL14:
 -- BFD_RELOC_CR16_REGREL14a:
 -- BFD_RELOC_CR16_REGREL16:
 -- BFD_RELOC_CR16_REGREL20:
 -- BFD_RELOC_CR16_REGREL20a:
 -- BFD_RELOC_CR16_ABS20:
 -- BFD_RELOC_CR16_ABS24:
 -- BFD_RELOC_CR16_IMM4:
 -- BFD_RELOC_CR16_IMM8:
 -- BFD_RELOC_CR16_IMM16:
 -- BFD_RELOC_CR16_IMM20:
 -- BFD_RELOC_CR16_IMM24:
 -- BFD_RELOC_CR16_IMM32:
 -- BFD_RELOC_CR16_IMM32a:
 -- BFD_RELOC_CR16_DISP4:
 -- BFD_RELOC_CR16_DISP8:
 -- BFD_RELOC_CR16_DISP16:
 -- BFD_RELOC_CR16_DISP20:
 -- BFD_RELOC_CR16_DISP24:
 -- BFD_RELOC_CR16_DISP24a:
 -- BFD_RELOC_CR16_SWITCH8:
 -- BFD_RELOC_CR16_SWITCH16:
 -- BFD_RELOC_CR16_SWITCH32:
 -- BFD_RELOC_CR16_GOT_REGREL20:
 -- BFD_RELOC_CR16_GOTC_REGREL20:
 -- BFD_RELOC_CR16_GLOB_DAT:
     NS CR16 Relocations.

 -- BFD_RELOC_CRX_REL4:
 -- BFD_RELOC_CRX_REL8:
 -- BFD_RELOC_CRX_REL8_CMP:
 -- BFD_RELOC_CRX_REL16:
 -- BFD_RELOC_CRX_REL24:
 -- BFD_RELOC_CRX_REL32:
 -- BFD_RELOC_CRX_REGREL12:
 -- BFD_RELOC_CRX_REGREL22:
 -- BFD_RELOC_CRX_REGREL28:
 -- BFD_RELOC_CRX_REGREL32:
 -- BFD_RELOC_CRX_ABS16:
 -- BFD_RELOC_CRX_ABS32:
 -- BFD_RELOC_CRX_NUM8:
 -- BFD_RELOC_CRX_NUM16:
 -- BFD_RELOC_CRX_NUM32:
 -- BFD_RELOC_CRX_IMM16:
 -- BFD_RELOC_CRX_IMM32:
 -- BFD_RELOC_CRX_SWITCH8:
 -- BFD_RELOC_CRX_SWITCH16:
 -- BFD_RELOC_CRX_SWITCH32:
     NS CRX Relocations.

 -- BFD_RELOC_CRIS_BDISP8:
 -- BFD_RELOC_CRIS_UNSIGNED_5:
 -- BFD_RELOC_CRIS_SIGNED_6:
 -- BFD_RELOC_CRIS_UNSIGNED_6:
 -- BFD_RELOC_CRIS_SIGNED_8:
 -- BFD_RELOC_CRIS_UNSIGNED_8:
 -- BFD_RELOC_CRIS_SIGNED_16:
 -- BFD_RELOC_CRIS_UNSIGNED_16:
 -- BFD_RELOC_CRIS_LAPCQ_OFFSET:
 -- BFD_RELOC_CRIS_UNSIGNED_4:
     These relocs are only used within the CRIS assembler.  They are not (at present) written to any object files.

 -- BFD_RELOC_CRIS_COPY:
 -- BFD_RELOC_CRIS_GLOB_DAT:
 -- BFD_RELOC_CRIS_JUMP_SLOT:
 -- BFD_RELOC_CRIS_RELATIVE:
     Relocs used in ELF shared libraries for CRIS.

 -- BFD_RELOC_CRIS_32_GOT:
     32-bit offset to symbol-entry within GOT.

 -- BFD_RELOC_CRIS_16_GOT:
     16-bit offset to symbol-entry within GOT.

 -- BFD_RELOC_CRIS_32_GOTPLT:
     32-bit offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_CRIS_16_GOTPLT:
     16-bit offset to symbol-entry within GOT, with PLT handling.

 -- BFD_RELOC_CRIS_32_GOTREL:
     32-bit offset to symbol, relative to GOT.

 -- BFD_RELOC_CRIS_32_PLT_GOTREL:
     32-bit offset to symbol with PLT entry, relative to GOT.

 -- BFD_RELOC_CRIS_32_PLT_PCREL:
     32-bit offset to symbol with PLT entry, relative to this relocation.

 -- BFD_RELOC_CRIS_32_GOT_GD:
 -- BFD_RELOC_CRIS_16_GOT_GD:
 -- BFD_RELOC_CRIS_32_GD:
 -- BFD_RELOC_CRIS_DTP:
 -- BFD_RELOC_CRIS_32_DTPREL:
 -- BFD_RELOC_CRIS_16_DTPREL:
 -- BFD_RELOC_CRIS_32_GOT_TPREL:
 -- BFD_RELOC_CRIS_16_GOT_TPREL:
 -- BFD_RELOC_CRIS_32_TPREL:
 -- BFD_RELOC_CRIS_16_TPREL:
 -- BFD_RELOC_CRIS_DTPMOD:
 -- BFD_RELOC_CRIS_32_IE:
     Relocs used in TLS code for CRIS.

 -- BFD_RELOC_OR1K_REL_26:
 -- BFD_RELOC_OR1K_SLO16:
 -- BFD_RELOC_OR1K_PCREL_PG21:
 -- BFD_RELOC_OR1K_LO13:
 -- BFD_RELOC_OR1K_SLO13:
 -- BFD_RELOC_OR1K_GOTPC_HI16:
 -- BFD_RELOC_OR1K_GOTPC_LO16:
 -- BFD_RELOC_OR1K_GOT_AHI16:
 -- BFD_RELOC_OR1K_GOT16:
 -- BFD_RELOC_OR1K_GOT_PG21:
 -- BFD_RELOC_OR1K_GOT_LO13:
 -- BFD_RELOC_OR1K_PLT26:
 -- BFD_RELOC_OR1K_PLTA26:
 -- BFD_RELOC_OR1K_GOTOFF_SLO16:
 -- BFD_RELOC_OR1K_COPY:
 -- BFD_RELOC_OR1K_GLOB_DAT:
 -- BFD_RELOC_OR1K_JMP_SLOT:
 -- BFD_RELOC_OR1K_RELATIVE:
 -- BFD_RELOC_OR1K_TLS_GD_HI16:
 -- BFD_RELOC_OR1K_TLS_GD_LO16:
 -- BFD_RELOC_OR1K_TLS_GD_PG21:
 -- BFD_RELOC_OR1K_TLS_GD_LO13:
 -- BFD_RELOC_OR1K_TLS_LDM_HI16:
 -- BFD_RELOC_OR1K_TLS_LDM_LO16:
 -- BFD_RELOC_OR1K_TLS_LDM_PG21:
 -- BFD_RELOC_OR1K_TLS_LDM_LO13:
 -- BFD_RELOC_OR1K_TLS_LDO_HI16:
 -- BFD_RELOC_OR1K_TLS_LDO_LO16:
 -- BFD_RELOC_OR1K_TLS_IE_HI16:
 -- BFD_RELOC_OR1K_TLS_IE_AHI16:
 -- BFD_RELOC_OR1K_TLS_IE_LO16:
 -- BFD_RELOC_OR1K_TLS_IE_PG21:
 -- BFD_RELOC_OR1K_TLS_IE_LO13:
 -- BFD_RELOC_OR1K_TLS_LE_HI16:
 -- BFD_RELOC_OR1K_TLS_LE_AHI16:
 -- BFD_RELOC_OR1K_TLS_LE_LO16:
 -- BFD_RELOC_OR1K_TLS_LE_SLO16:
 -- BFD_RELOC_OR1K_TLS_TPOFF:
 -- BFD_RELOC_OR1K_TLS_DTPOFF:
 -- BFD_RELOC_OR1K_TLS_DTPMOD:
     OpenRISC 1000 Relocations.

 -- BFD_RELOC_H8_DIR16A8:
 -- BFD_RELOC_H8_DIR16R8:
 -- BFD_RELOC_H8_DIR24A8:
 -- BFD_RELOC_H8_DIR24R8:
 -- BFD_RELOC_H8_DIR32A16:
 -- BFD_RELOC_H8_DISP32A16:
     H8 elf Relocations.

 -- BFD_RELOC_XSTORMY16_REL_12:
 -- BFD_RELOC_XSTORMY16_12:
 -- BFD_RELOC_XSTORMY16_24:
 -- BFD_RELOC_XSTORMY16_FPTR16:
     Sony Xstormy16 Relocations.

 -- BFD_RELOC_RELC:
     Self-describing complex relocations.

 -- BFD_RELOC_XC16X_PAG:
 -- BFD_RELOC_XC16X_POF:
 -- BFD_RELOC_XC16X_SEG:
 -- BFD_RELOC_XC16X_SOF:
     Infineon Relocations.

 -- BFD_RELOC_VAX_GLOB_DAT:
 -- BFD_RELOC_VAX_JMP_SLOT:
 -- BFD_RELOC_VAX_RELATIVE:
     Relocations used by VAX ELF.

 -- BFD_RELOC_MT_PC16:
     Morpho MT - 16 bit immediate relocation.

 -- BFD_RELOC_MT_HI16:
     Morpho MT - Hi 16 bits of an address.

 -- BFD_RELOC_MT_LO16:
     Morpho MT - Low 16 bits of an address.

 -- BFD_RELOC_MT_GNU_VTINHERIT:
     Morpho MT - Used to tell the linker which vtable entries are used.

 -- BFD_RELOC_MT_GNU_VTENTRY:
     Morpho MT - Used to tell the linker which vtable entries are used.

 -- BFD_RELOC_MT_PCINSN8:
     Morpho MT - 8 bit immediate relocation.

 -- BFD_RELOC_MSP430_10_PCREL:
 -- BFD_RELOC_MSP430_16_PCREL:
 -- BFD_RELOC_MSP430_16:
 -- BFD_RELOC_MSP430_16_PCREL_BYTE:
 -- BFD_RELOC_MSP430_16_BYTE:
 -- BFD_RELOC_MSP430_2X_PCREL:
 -- BFD_RELOC_MSP430_RL_PCREL:
 -- BFD_RELOC_MSP430_ABS8:
 -- BFD_RELOC_MSP430X_PCR20_EXT_SRC:
 -- BFD_RELOC_MSP430X_PCR20_EXT_DST:
 -- BFD_RELOC_MSP430X_PCR20_EXT_ODST:
 -- BFD_RELOC_MSP430X_ABS20_EXT_SRC:
 -- BFD_RELOC_MSP430X_ABS20_EXT_DST:
 -- BFD_RELOC_MSP430X_ABS20_EXT_ODST:
 -- BFD_RELOC_MSP430X_ABS20_ADR_SRC:
 -- BFD_RELOC_MSP430X_ABS20_ADR_DST:
 -- BFD_RELOC_MSP430X_PCR16:
 -- BFD_RELOC_MSP430X_PCR20_CALL:
 -- BFD_RELOC_MSP430X_ABS16:
 -- BFD_RELOC_MSP430_ABS_HI16:
 -- BFD_RELOC_MSP430_PREL31:
 -- BFD_RELOC_MSP430_SYM_DIFF:
 -- BFD_RELOC_MSP430_SET_ULEB128:
 -- BFD_RELOC_MSP430_SUB_ULEB128:
     msp430 specific relocation codes

 -- BFD_RELOC_NIOS2_S16:
 -- BFD_RELOC_NIOS2_U16:
 -- BFD_RELOC_NIOS2_CALL26:
 -- BFD_RELOC_NIOS2_IMM5:
 -- BFD_RELOC_NIOS2_CACHE_OPX:
 -- BFD_RELOC_NIOS2_IMM6:
 -- BFD_RELOC_NIOS2_IMM8:
 -- BFD_RELOC_NIOS2_HI16:
 -- BFD_RELOC_NIOS2_LO16:
 -- BFD_RELOC_NIOS2_HIADJ16:
 -- BFD_RELOC_NIOS2_GPREL:
 -- BFD_RELOC_NIOS2_UJMP:
 -- BFD_RELOC_NIOS2_CJMP:
 -- BFD_RELOC_NIOS2_CALLR:
 -- BFD_RELOC_NIOS2_ALIGN:
 -- BFD_RELOC_NIOS2_GOT16:
 -- BFD_RELOC_NIOS2_CALL16:
 -- BFD_RELOC_NIOS2_GOTOFF_LO:
 -- BFD_RELOC_NIOS2_GOTOFF_HA:
 -- BFD_RELOC_NIOS2_PCREL_LO:
 -- BFD_RELOC_NIOS2_PCREL_HA:
 -- BFD_RELOC_NIOS2_TLS_GD16:
 -- BFD_RELOC_NIOS2_TLS_LDM16:
 -- BFD_RELOC_NIOS2_TLS_LDO16:
 -- BFD_RELOC_NIOS2_TLS_IE16:
 -- BFD_RELOC_NIOS2_TLS_LE16:
 -- BFD_RELOC_NIOS2_TLS_DTPMOD:
 -- BFD_RELOC_NIOS2_TLS_DTPREL:
 -- BFD_RELOC_NIOS2_TLS_TPREL:
 -- BFD_RELOC_NIOS2_COPY:
 -- BFD_RELOC_NIOS2_GLOB_DAT:
 -- BFD_RELOC_NIOS2_JUMP_SLOT:
 -- BFD_RELOC_NIOS2_RELATIVE:
 -- BFD_RELOC_NIOS2_GOTOFF:
 -- BFD_RELOC_NIOS2_CALL26_NOAT:
 -- BFD_RELOC_NIOS2_GOT_LO:
 -- BFD_RELOC_NIOS2_GOT_HA:
 -- BFD_RELOC_NIOS2_CALL_LO:
 -- BFD_RELOC_NIOS2_CALL_HA:
 -- BFD_RELOC_NIOS2_R2_S12:
 -- BFD_RELOC_NIOS2_R2_I10_1_PCREL:
 -- BFD_RELOC_NIOS2_R2_T1I7_1_PCREL:
 -- BFD_RELOC_NIOS2_R2_T1I7_2:
 -- BFD_RELOC_NIOS2_R2_T2I4:
 -- BFD_RELOC_NIOS2_R2_T2I4_1:
 -- BFD_RELOC_NIOS2_R2_T2I4_2:
 -- BFD_RELOC_NIOS2_R2_X1I7_2:
 -- BFD_RELOC_NIOS2_R2_X2L5:
 -- BFD_RELOC_NIOS2_R2_F1I5_2:
 -- BFD_RELOC_NIOS2_R2_L5I4X1:
 -- BFD_RELOC_NIOS2_R2_T1X1I6:
 -- BFD_RELOC_NIOS2_R2_T1X1I6_2:
     Relocations used by the Altera Nios II core.

 -- BFD_RELOC_PRU_U16:
     PRU LDI 16-bit unsigned data-memory relocation.

 -- BFD_RELOC_PRU_U16_PMEMIMM:
     PRU LDI 16-bit unsigned instruction-memory relocation.

 -- BFD_RELOC_PRU_LDI32:
     PRU relocation for two consecutive LDI load instructions that load a 32 bit value into a register. If the higher bits are all zero, then the second instruction may be relaxed.

 -- BFD_RELOC_PRU_S10_PCREL:
     PRU QBBx 10-bit signed PC-relative relocation.

 -- BFD_RELOC_PRU_U8_PCREL:
     PRU 8-bit unsigned relocation used for the LOOP instruction.

 -- BFD_RELOC_PRU_32_PMEM:
 -- BFD_RELOC_PRU_16_PMEM:
     PRU Program Memory relocations.  Used to convert from byte addressing to 32-bit word addressing.

 -- BFD_RELOC_PRU_GNU_DIFF8:
 -- BFD_RELOC_PRU_GNU_DIFF16:
 -- BFD_RELOC_PRU_GNU_DIFF32:
 -- BFD_RELOC_PRU_GNU_DIFF16_PMEM:
 -- BFD_RELOC_PRU_GNU_DIFF32_PMEM:
     PRU relocations to mark the difference of two local symbols. These are only needed to support linker relaxation and can be ignored when not relaxing.  The field is set to the value of the difference assuming no relaxation.  The relocation encodes the position of the second symbol so the linker can determine whether to adjust the field value. The PMEM variants encode the word difference, instead of byte difference between symbols.

 -- BFD_RELOC_IQ2000_OFFSET_16:
 -- BFD_RELOC_IQ2000_OFFSET_21:
 -- BFD_RELOC_IQ2000_UHI16:
     IQ2000 Relocations.

 -- BFD_RELOC_XTENSA_RTLD:
     Special Xtensa relocation used only by PLT entries in ELF shared objects to indicate that the runtime linker should set the value to one of its own internal functions or data structures.

 -- BFD_RELOC_XTENSA_GLOB_DAT:
 -- BFD_RELOC_XTENSA_JMP_SLOT:
 -- BFD_RELOC_XTENSA_RELATIVE:
     Xtensa relocations for ELF shared objects.

 -- BFD_RELOC_XTENSA_PLT:
     Xtensa relocation used in ELF object files for symbols that may require PLT entries.  Otherwise, this is just a generic 32-bit relocation.

 -- BFD_RELOC_XTENSA_DIFF8:
 -- BFD_RELOC_XTENSA_DIFF16:
 -- BFD_RELOC_XTENSA_DIFF32:
     Xtensa relocations for backward compatibility.  These have been replaced by BFD_RELOC_XTENSA_PDIFF and BFD_RELOC_XTENSA_NDIFF. Xtensa relocations to mark the difference of two local symbols. These are only needed to support linker relaxation and can be ignored when not relaxing.  The field is set to the value of the difference assuming no relaxation.  The relocation encodes the position of the first symbol so the linker can determine whether to adjust the field value.

 -- BFD_RELOC_XTENSA_SLOT0_OP:
 -- BFD_RELOC_XTENSA_SLOT1_OP:
 -- BFD_RELOC_XTENSA_SLOT2_OP:
 -- BFD_RELOC_XTENSA_SLOT3_OP:
 -- BFD_RELOC_XTENSA_SLOT4_OP:
 -- BFD_RELOC_XTENSA_SLOT5_OP:
 -- BFD_RELOC_XTENSA_SLOT6_OP:
 -- BFD_RELOC_XTENSA_SLOT7_OP:
 -- BFD_RELOC_XTENSA_SLOT8_OP:
 -- BFD_RELOC_XTENSA_SLOT9_OP:
 -- BFD_RELOC_XTENSA_SLOT10_OP:
 -- BFD_RELOC_XTENSA_SLOT11_OP:
 -- BFD_RELOC_XTENSA_SLOT12_OP:
 -- BFD_RELOC_XTENSA_SLOT13_OP:
 -- BFD_RELOC_XTENSA_SLOT14_OP:
     Generic Xtensa relocations for instruction operands.  Only the slot number is encoded in the relocation.  The relocation applies to the last PC-relative immediate operand, or if there are no PC-relative immediates, to the last immediate operand.

 -- BFD_RELOC_XTENSA_SLOT0_ALT:
 -- BFD_RELOC_XTENSA_SLOT1_ALT:
 -- BFD_RELOC_XTENSA_SLOT2_ALT:
 -- BFD_RELOC_XTENSA_SLOT3_ALT:
 -- BFD_RELOC_XTENSA_SLOT4_ALT:
 -- BFD_RELOC_XTENSA_SLOT5_ALT:
 -- BFD_RELOC_XTENSA_SLOT6_ALT:
 -- BFD_RELOC_XTENSA_SLOT7_ALT:
 -- BFD_RELOC_XTENSA_SLOT8_ALT:
 -- BFD_RELOC_XTENSA_SLOT9_ALT:
 -- BFD_RELOC_XTENSA_SLOT10_ALT:
 -- BFD_RELOC_XTENSA_SLOT11_ALT:
 -- BFD_RELOC_XTENSA_SLOT12_ALT:
 -- BFD_RELOC_XTENSA_SLOT13_ALT:
 -- BFD_RELOC_XTENSA_SLOT14_ALT:
     Alternate Xtensa relocations.  Only the slot is encoded in the relocation.  The meaning of these relocations is opcode-specific.

 -- BFD_RELOC_XTENSA_OP0:
 -- BFD_RELOC_XTENSA_OP1:
 -- BFD_RELOC_XTENSA_OP2:
     Xtensa relocations for backward compatibility.  These have all been replaced by BFD_RELOC_XTENSA_SLOT0_OP.

 -- BFD_RELOC_XTENSA_ASM_EXPAND:
     Xtensa relocation to mark that the assembler expanded the instructions from an original target.  The expansion size is encoded in the reloc size.

 -- BFD_RELOC_XTENSA_ASM_SIMPLIFY:
     Xtensa relocation to mark that the linker should simplify assembler-expanded instructions.  This is commonly used internally by the linker after analysis of a BFD_RELOC_XTENSA_ASM_EXPAND.

 -- BFD_RELOC_XTENSA_TLSDESC_FN:
 -- BFD_RELOC_XTENSA_TLSDESC_ARG:
 -- BFD_RELOC_XTENSA_TLS_DTPOFF:
 -- BFD_RELOC_XTENSA_TLS_TPOFF:
 -- BFD_RELOC_XTENSA_TLS_FUNC:
 -- BFD_RELOC_XTENSA_TLS_ARG:
 -- BFD_RELOC_XTENSA_TLS_CALL:
     Xtensa TLS relocations.

 -- BFD_RELOC_XTENSA_PDIFF8:
 -- BFD_RELOC_XTENSA_PDIFF16:
 -- BFD_RELOC_XTENSA_PDIFF32:
 -- BFD_RELOC_XTENSA_NDIFF8:
 -- BFD_RELOC_XTENSA_NDIFF16:
 -- BFD_RELOC_XTENSA_NDIFF32:
     Xtensa relocations to mark the difference of two local symbols. These are only needed to support linker relaxation and can be ignored when not relaxing.  The field is set to the value of the difference assuming no relaxation.  The relocation encodes the position of the subtracted symbol so the linker can determine whether to adjust the field value.  PDIFF relocations are used for positive differences, NDIFF relocations are used for negative differences.  The difference value is treated as unsigned with these relocation types, giving full 8/16 value ranges.

 -- BFD_RELOC_Z80_DISP8:
     8 bit signed offset in (ix+d) or (iy+d).

 -- BFD_RELOC_Z80_BYTE0:
     First 8 bits of multibyte (32, 24 or 16 bit) value.

 -- BFD_RELOC_Z80_BYTE1:
     Second 8 bits of multibyte (32, 24 or 16 bit) value.

 -- BFD_RELOC_Z80_BYTE2:
     Third 8 bits of multibyte (32 or 24 bit) value.

 -- BFD_RELOC_Z80_BYTE3:
     Fourth 8 bits of multibyte (32 bit) value.

 -- BFD_RELOC_Z80_WORD0:
     Lowest 16 bits of multibyte (32 or 24 bit) value.

 -- BFD_RELOC_Z80_WORD1:
     Highest 16 bits of multibyte (32 or 24 bit) value.

 -- BFD_RELOC_Z80_16_BE:
     Like BFD_RELOC_16 but big-endian.

 -- BFD_RELOC_Z8K_DISP7:
     DJNZ offset.

 -- BFD_RELOC_Z8K_CALLR:
     CALR offset.

 -- BFD_RELOC_Z8K_IMM4L:
     4 bit value.

 -- BFD_RELOC_LM32_CALL:
 -- BFD_RELOC_LM32_BRANCH:
 -- BFD_RELOC_LM32_16_GOT:
 -- BFD_RELOC_LM32_GOTOFF_HI16:
 -- BFD_RELOC_LM32_GOTOFF_LO16:
 -- BFD_RELOC_LM32_COPY:
 -- BFD_RELOC_LM32_GLOB_DAT:
 -- BFD_RELOC_LM32_JMP_SLOT:
 -- BFD_RELOC_LM32_RELATIVE:
     Lattice Mico32 relocations.

 -- BFD_RELOC_MACH_O_SECTDIFF:
     Difference between two section addreses.  Must be followed by a BFD_RELOC_MACH_O_PAIR.

 -- BFD_RELOC_MACH_O_LOCAL_SECTDIFF:
     Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.

 -- BFD_RELOC_MACH_O_PAIR:
     Pair of relocation.  Contains the first symbol.

 -- BFD_RELOC_MACH_O_SUBTRACTOR32:
     Symbol will be substracted.  Must be followed by a BFD_RELOC_32.

 -- BFD_RELOC_MACH_O_SUBTRACTOR64:
     Symbol will be substracted.  Must be followed by a BFD_RELOC_64.

 -- BFD_RELOC_MACH_O_X86_64_BRANCH32:
 -- BFD_RELOC_MACH_O_X86_64_BRANCH8:
     PCREL relocations.  They are marked as branch to create PLT entry if required.

 -- BFD_RELOC_MACH_O_X86_64_GOT:
     Used when referencing a GOT entry.

 -- BFD_RELOC_MACH_O_X86_64_GOT_LOAD:
     Used when loading a GOT entry with movq.  It is specially marked so that the linker could optimize the movq to a leaq if possible.

 -- BFD_RELOC_MACH_O_X86_64_PCREL32_1:
     Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.

 -- BFD_RELOC_MACH_O_X86_64_PCREL32_2:
     Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.

 -- BFD_RELOC_MACH_O_X86_64_PCREL32_4:
     Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.

 -- BFD_RELOC_MACH_O_X86_64_TLV:
     Used when referencing a TLV entry.

 -- BFD_RELOC_MACH_O_ARM64_ADDEND:
     Addend for PAGE or PAGEOFF.

 -- BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGE21:
     Relative offset to page of GOT slot.

 -- BFD_RELOC_MACH_O_ARM64_GOT_LOAD_PAGEOFF12:
     Relative offset within page of GOT slot.

 -- BFD_RELOC_MACH_O_ARM64_POINTER_TO_GOT:
     Address of a GOT entry.

 -- BFD_RELOC_MICROBLAZE_32_LO:
     This is a 32 bit reloc for the microblaze that stores the low 16 bits of a value

 -- BFD_RELOC_MICROBLAZE_32_LO_PCREL:
     This is a 32 bit pc-relative reloc for the microblaze that stores the low 16 bits of a value

 -- BFD_RELOC_MICROBLAZE_32_ROSDA:
     This is a 32 bit reloc for the microblaze that stores a value relative to the read-only small data area anchor

 -- BFD_RELOC_MICROBLAZE_32_RWSDA:
     This is a 32 bit reloc for the microblaze that stores a value relative to the read-write small data area anchor

 -- BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM:
     This is a 32 bit reloc for the microblaze to handle expressions of the form "Symbol Op Symbol"

 -- BFD_RELOC_MICROBLAZE_64_NONE:
     This is a 64 bit reloc that stores the 32 bit pc relative value in two words (with an imm instruction).  No relocation is done here - only used for relaxing

 -- BFD_RELOC_MICROBLAZE_64_GOTPC:
     This is a 64 bit reloc that stores the 32 bit pc relative value in two words (with an imm instruction).  The relocation is PC-relative GOT offset

 -- BFD_RELOC_MICROBLAZE_64_GOT:
     This is a 64 bit reloc that stores the 32 bit pc relative value in two words (with an imm instruction).  The relocation is GOT offset

 -- BFD_RELOC_MICROBLAZE_64_PLT:
     This is a 64 bit reloc that stores the 32 bit pc relative value in two words (with an imm instruction).  The relocation is PC-relative offset into PLT

 -- BFD_RELOC_MICROBLAZE_64_GOTOFF:
     This is a 64 bit reloc that stores the 32 bit GOT relative value in two words (with an imm instruction).  The relocation is relative offset from _GLOBAL_OFFSET_TABLE_

 -- BFD_RELOC_MICROBLAZE_32_GOTOFF:
     This is a 32 bit reloc that stores the 32 bit GOT relative value in a word.  The relocation is relative offset from

 -- BFD_RELOC_MICROBLAZE_COPY:
     This is used to tell the dynamic linker to copy the value out of the dynamic object into the runtime process image.

 -- BFD_RELOC_MICROBLAZE_64_TLS:
     Unused Reloc

 -- BFD_RELOC_MICROBLAZE_64_TLSGD:
     This is a 64 bit reloc that stores the 32 bit GOT relative value of the GOT TLS GD info entry in two words (with an imm instruction). The relocation is GOT offset.

 -- BFD_RELOC_MICROBLAZE_64_TLSLD:
     This is a 64 bit reloc that stores the 32 bit GOT relative value of the GOT TLS LD info entry in two words (with an imm instruction). The relocation is GOT offset.

 -- BFD_RELOC_MICROBLAZE_32_TLSDTPMOD:
     This is a 32 bit reloc that stores the Module ID to GOT(n).

 -- BFD_RELOC_MICROBLAZE_32_TLSDTPREL:
     This is a 32 bit reloc that stores TLS offset to GOT(n+1).

 -- BFD_RELOC_MICROBLAZE_64_TLSDTPREL:
     This is a 32 bit reloc for storing TLS offset to two words (uses imm instruction)

 -- BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL:
     This is a 64 bit reloc that stores 32-bit thread pointer relative offset to two words (uses imm instruction).

 -- BFD_RELOC_MICROBLAZE_64_TLSTPREL:
     This is a 64 bit reloc that stores 32-bit thread pointer relative offset to two words (uses imm instruction).

 -- BFD_RELOC_MICROBLAZE_64_TEXTPCREL:
     This is a 64 bit reloc that stores the 32 bit pc relative value in two words (with an imm instruction).  The relocation is PC-relative offset from start of TEXT.

 -- BFD_RELOC_MICROBLAZE_64_TEXTREL:
     This is a 64 bit reloc that stores the 32 bit offset value in two words (with an imm instruction).  The relocation is relative offset from start of TEXT.

 -- BFD_RELOC_AARCH64_RELOC_START:
     AArch64 pseudo relocation code to mark the start of the AArch64 relocation enumerators.  N.B. the order of the enumerators is important as several tables in the AArch64 bfd backend are indexed by these enumerators; make sure they are all synced.

 -- BFD_RELOC_AARCH64_NULL:
     Deprecated AArch64 null relocation code.

 -- BFD_RELOC_AARCH64_NONE:
     AArch64 null relocation code.

 -- BFD_RELOC_AARCH64_64:
 -- BFD_RELOC_AARCH64_32:
 -- BFD_RELOC_AARCH64_16:
     Basic absolute relocations of N bits.  These are equivalent to BFD_RELOC_N and they were added to assist the indexing of the howto table.

 -- BFD_RELOC_AARCH64_64_PCREL:
 -- BFD_RELOC_AARCH64_32_PCREL:
 -- BFD_RELOC_AARCH64_16_PCREL:
     PC-relative relocations.  These are equivalent to BFD_RELOC_N_PCREL and they were added to assist the indexing of the howto table.

 -- BFD_RELOC_AARCH64_MOVW_G0:
     AArch64 MOV[NZK] instruction with most significant bits 0 to 15 of an unsigned address/value.

 -- BFD_RELOC_AARCH64_MOVW_G0_NC:
     AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of an address/value.  No overflow checking.

 -- BFD_RELOC_AARCH64_MOVW_G1:
     AArch64 MOV[NZK] instruction with most significant bits 16 to 31 of an unsigned address/value.

 -- BFD_RELOC_AARCH64_MOVW_G1_NC:
     AArch64 MOV[NZK] instruction with less significant bits 16 to 31 of an address/value.  No overflow checking.

 -- BFD_RELOC_AARCH64_MOVW_G2:
     AArch64 MOV[NZK] instruction with most significant bits 32 to 47 of an unsigned address/value.

 -- BFD_RELOC_AARCH64_MOVW_G2_NC:
     AArch64 MOV[NZK] instruction with less significant bits 32 to 47 of an address/value.  No overflow checking.

 -- BFD_RELOC_AARCH64_MOVW_G3:
     AArch64 MOV[NZK] instruction with most signficant bits 48 to 64 of a signed or unsigned address/value.

 -- BFD_RELOC_AARCH64_MOVW_G0_S:
     AArch64 MOV[NZ] instruction with most significant bits 0 to 15 of a signed value.  Changes instruction to MOVZ or MOVN depending on the value's sign.

 -- BFD_RELOC_AARCH64_MOVW_G1_S:
     AArch64 MOV[NZ] instruction with most significant bits 16 to 31 of a signed value.  Changes instruction to MOVZ or MOVN depending on the value's sign.

 -- BFD_RELOC_AARCH64_MOVW_G2_S:
     AArch64 MOV[NZ] instruction with most significant bits 32 to 47 of a signed value.  Changes instruction to MOVZ or MOVN depending on the value's sign.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G0:
     AArch64 MOV[NZ] instruction with most significant bits 0 to 15 of a signed value.  Changes instruction to MOVZ or MOVN depending on the value's sign.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G0_NC:
     AArch64 MOV[NZ] instruction with most significant bits 0 to 15 of a signed value.  Changes instruction to MOVZ or MOVN depending on the value's sign.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G1:
     AArch64 MOVK instruction with most significant bits 16 to 31 of a signed value.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G1_NC:
     AArch64 MOVK instruction with most significant bits 16 to 31 of a signed value.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G2:
     AArch64 MOVK instruction with most significant bits 32 to 47 of a signed value.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G2_NC:
     AArch64 MOVK instruction with most significant bits 32 to 47 of a signed value.

 -- BFD_RELOC_AARCH64_MOVW_PREL_G3:
     AArch64 MOVK instruction with most significant bits 47 to 63 of a signed value.

 -- BFD_RELOC_AARCH64_LD_LO19_PCREL:
     AArch64 Load Literal instruction, holding a 19 bit pc-relative word offset.  The lowest two bits must be zero and are not stored in the instruction, giving a 21 bit signed byte offset.

 -- BFD_RELOC_AARCH64_ADR_LO21_PCREL:
     AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.

 -- BFD_RELOC_AARCH64_ADR_HI21_PCREL:
     AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page offset, giving a 4KB aligned page base address.

 -- BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL:
     AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page offset, giving a 4KB aligned page base address, but with no overflow checking.

 -- BFD_RELOC_AARCH64_ADD_LO12:
     AArch64 ADD immediate instruction, holding bits 0 to 11 of the address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_LDST8_LO12:
     AArch64 8-bit load/store instruction, holding bits 0 to 11 of the address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_TSTBR14:
     AArch64 14 bit pc-relative test bit and branch. The lowest two bits must be zero and are not stored in the instruction, giving a 16 bit signed byte offset.

 -- BFD_RELOC_AARCH64_BRANCH19:
     AArch64 19 bit pc-relative conditional branch and compare & branch. The lowest two bits must be zero and are not stored in the instruction, giving a 21 bit signed byte offset.

 -- BFD_RELOC_AARCH64_JUMP26:
     AArch64 26 bit pc-relative unconditional branch. The lowest two bits must be zero and are not stored in the instruction, giving a 28 bit signed byte offset.

 -- BFD_RELOC_AARCH64_CALL26:
     AArch64 26 bit pc-relative unconditional branch and link. The lowest two bits must be zero and are not stored in the instruction, giving a 28 bit signed byte offset.

 -- BFD_RELOC_AARCH64_LDST16_LO12:
     AArch64 16-bit load/store instruction, holding bits 0 to 11 of the address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_LDST32_LO12:
     AArch64 32-bit load/store instruction, holding bits 0 to 11 of the address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_LDST64_LO12:
     AArch64 64-bit load/store instruction, holding bits 0 to 11 of the address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_LDST128_LO12:
     AArch64 128-bit load/store instruction, holding bits 0 to 11 of the address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_GOT_LD_PREL19:
     AArch64 Load Literal instruction, holding a 19 bit PC relative word offset of the global offset table entry for a symbol.  The lowest two bits must be zero and are not stored in the instruction, giving a 21 bit signed byte offset.  This relocation type requires signed overflow checking.

 -- BFD_RELOC_AARCH64_ADR_GOT_PAGE:
     Get to the page base of the global offset table entry for a symbol as part of an ADRP instruction using a 21 bit PC relative value.Used in conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.

 -- BFD_RELOC_AARCH64_LD64_GOT_LO12_NC:
     Unsigned 12 bit byte offset for 64 bit load/store from the page of the GOT entry for this symbol.  Used in conjunction with BFD_RELOC_AARCH64_ADR_GOT_PAGE.  Valid in LP64 ABI only.

 -- BFD_RELOC_AARCH64_LD32_GOT_LO12_NC:
     Unsigned 12 bit byte offset for 32 bit load/store from the page of the GOT entry for this symbol.  Used in conjunction with BFD_RELOC_AARCH64_ADR_GOT_PAGE.  Valid in ILP32 ABI only.

 -- BFD_RELOC_AARCH64_MOVW_GOTOFF_G0_NC:
     Unsigned 16 bit byte offset for 64 bit load/store from the GOT entry for this symbol.  Valid in LP64 ABI only.

 -- BFD_RELOC_AARCH64_MOVW_GOTOFF_G1:
     Unsigned 16 bit byte higher offset for 64 bit load/store from the GOT entry for this symbol.  Valid in LP64 ABI only.

 -- BFD_RELOC_AARCH64_LD64_GOTOFF_LO15:
     Unsigned 15 bit byte offset for 64 bit load/store from the page of the GOT entry for this symbol.  Valid in LP64 ABI only.

 -- BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14:
     Scaled 14 bit byte offset to the page base of the global offset table.

 -- BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15:
     Scaled 15 bit byte offset to the page base of the global offset table.

 -- BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21:
     Get to the page base of the global offset table entry for a symbols tls_index structure as part of an adrp instruction using a 21 bit PC relative value.  Used in conjunction with BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.

 -- BFD_RELOC_AARCH64_TLSGD_ADR_PREL21:
     AArch64 TLS General Dynamic

 -- BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC:
     Unsigned 12 bit byte offset to global offset table entry for a symbols tls_index structure.  Used in conjunction with BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.

 -- BFD_RELOC_AARCH64_TLSGD_MOVW_G0_NC:
     AArch64 TLS General Dynamic relocation.

 -- BFD_RELOC_AARCH64_TLSGD_MOVW_G1:
     AArch64 TLS General Dynamic relocation.

 -- BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21:
     AArch64 TLS INITIAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC:
     AArch64 TLS INITIAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC:
     AArch64 TLS INITIAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19:
     AArch64 TLS INITIAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC:
     AArch64 TLS INITIAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1:
     AArch64 TLS INITIAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_HI12:
     bit[23:12] of byte offset to module TLS base address.

 -- BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12:
     Unsigned 12 bit byte offset to module TLS base address.

 -- BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC:
     No overflow check version of BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.

 -- BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC:
     Unsigned 12 bit byte offset to global offset table entry for a symbols tls_index structure.  Used in conjunction with BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.

 -- BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21:
     GOT entry page address for AArch64 TLS Local Dynamic, used with ADRP instruction.

 -- BFD_RELOC_AARCH64_TLSLD_ADR_PREL21:
     GOT entry address for AArch64 TLS Local Dynamic, used with ADR instruction.

 -- BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12:
     bit[11:1] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12:
     bit[11:2] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12:
     bit[11:3] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12:
     bit[11:0] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0:
     bit[15:0] of byte offset to module TLS base address.

 -- BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0_NC:
     No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G0

 -- BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1:
     bit[31:16] of byte offset to module TLS base address.

 -- BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1_NC:
     No overflow check version of BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G1

 -- BFD_RELOC_AARCH64_TLSLD_MOVW_DTPREL_G2:
     bit[47:32] of byte offset to module TLS base address.

 -- BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC:
     AArch64 TLS LOCAL EXEC relocation.

 -- BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12:
     bit[11:1] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12:
     bit[11:2] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12:
     bit[11:3] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12:
     bit[11:0] of byte offset to module TLS base address, encoded in ldst instructions.

 -- BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSDESC_LD_PREL19:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_LD64_LO12:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_ADD_LO12:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_OFF_G1:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_LDR:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_ADD:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_TLSDESC_CALL:
     AArch64 TLS DESC relocation.

 -- BFD_RELOC_AARCH64_COPY:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_GLOB_DAT:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_JUMP_SLOT:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_RELATIVE:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_TLS_DTPMOD:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_TLS_DTPREL:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_TLS_TPREL:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_TLSDESC:
     AArch64 TLS relocation.

 -- BFD_RELOC_AARCH64_IRELATIVE:
     AArch64 support for STT_GNU_IFUNC.

 -- BFD_RELOC_AARCH64_RELOC_END:
     AArch64 pseudo relocation code to mark the end of the AArch64 relocation enumerators that have direct mapping to ELF reloc codes. There are a few more enumerators after this one; those are mainly used by the AArch64 assembler for the internal fixup or to select one of the above enumerators.

 -- BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP:
     AArch64 pseudo relocation code to be used internally by the AArch64 assembler and not (currently) written to any object files.

 -- BFD_RELOC_AARCH64_LDST_LO12:
     AArch64 unspecified load/store instruction, holding bits 0 to 11 of the address.  Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.

 -- BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12:
     AArch64 pseudo relocation code for TLS local dynamic mode.  It's to be used internally by the AArch64 assembler and not (currently) written to any object files.

 -- BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLD_LDST_DTPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12:
     AArch64 pseudo relocation code for TLS local exec mode.  It's to be used internally by the AArch64 assembler and not (currently) written to any object files.

 -- BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12_NC:
     Similar as BFD_RELOC_AARCH64_TLSLE_LDST_TPREL_LO12, but no overflow check.

 -- BFD_RELOC_AARCH64_LD_GOT_LO12_NC:
     AArch64 pseudo relocation code to be used internally by the AArch64 assembler and not (currently) written to any object files.

 -- BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC:
     AArch64 pseudo relocation code to be used internally by the AArch64 assembler and not (currently) written to any object files.

 -- BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC:
     AArch64 pseudo relocation code to be used internally by the AArch64 assembler and not (currently) written to any object files.

 -- BFD_RELOC_TILEPRO_COPY:
 -- BFD_RELOC_TILEPRO_GLOB_DAT:
 -- BFD_RELOC_TILEPRO_JMP_SLOT:
 -- BFD_RELOC_TILEPRO_RELATIVE:
 -- BFD_RELOC_TILEPRO_BROFF_X1:
 -- BFD_RELOC_TILEPRO_JOFFLONG_X1:
 -- BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT:
 -- BFD_RELOC_TILEPRO_IMM8_X0:
 -- BFD_RELOC_TILEPRO_IMM8_Y0:
 -- BFD_RELOC_TILEPRO_IMM8_X1:
 -- BFD_RELOC_TILEPRO_IMM8_Y1:
 -- BFD_RELOC_TILEPRO_DEST_IMM8_X1:
 -- BFD_RELOC_TILEPRO_MT_IMM15_X1:
 -- BFD_RELOC_TILEPRO_MF_IMM15_X1:
 -- BFD_RELOC_TILEPRO_IMM16_X0:
 -- BFD_RELOC_TILEPRO_IMM16_X1:
 -- BFD_RELOC_TILEPRO_IMM16_X0_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X1_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X0_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X1_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X0_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X1_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X0_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X1_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL:
 -- BFD_RELOC_TILEPRO_IMM16_X0_GOT:
 -- BFD_RELOC_TILEPRO_IMM16_X1_GOT:
 -- BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA:
 -- BFD_RELOC_TILEPRO_MMSTART_X0:
 -- BFD_RELOC_TILEPRO_MMEND_X0:
 -- BFD_RELOC_TILEPRO_MMSTART_X1:
 -- BFD_RELOC_TILEPRO_MMEND_X1:
 -- BFD_RELOC_TILEPRO_SHAMT_X0:
 -- BFD_RELOC_TILEPRO_SHAMT_X1:
 -- BFD_RELOC_TILEPRO_SHAMT_Y0:
 -- BFD_RELOC_TILEPRO_SHAMT_Y1:
 -- BFD_RELOC_TILEPRO_TLS_GD_CALL:
 -- BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD:
 -- BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD:
 -- BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD:
 -- BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD:
 -- BFD_RELOC_TILEPRO_TLS_IE_LOAD:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA:
 -- BFD_RELOC_TILEPRO_TLS_DTPMOD32:
 -- BFD_RELOC_TILEPRO_TLS_DTPOFF32:
 -- BFD_RELOC_TILEPRO_TLS_TPOFF32:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI:
 -- BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA:
 -- BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA:
     Tilera TILEPro Relocations.

 -- BFD_RELOC_TILEGX_HW0:
 -- BFD_RELOC_TILEGX_HW1:
 -- BFD_RELOC_TILEGX_HW2:
 -- BFD_RELOC_TILEGX_HW3:
 -- BFD_RELOC_TILEGX_HW0_LAST:
 -- BFD_RELOC_TILEGX_HW1_LAST:
 -- BFD_RELOC_TILEGX_HW2_LAST:
 -- BFD_RELOC_TILEGX_COPY:
 -- BFD_RELOC_TILEGX_GLOB_DAT:
 -- BFD_RELOC_TILEGX_JMP_SLOT:
 -- BFD_RELOC_TILEGX_RELATIVE:
 -- BFD_RELOC_TILEGX_BROFF_X1:
 -- BFD_RELOC_TILEGX_JUMPOFF_X1:
 -- BFD_RELOC_TILEGX_JUMPOFF_X1_PLT:
 -- BFD_RELOC_TILEGX_IMM8_X0:
 -- BFD_RELOC_TILEGX_IMM8_Y0:
 -- BFD_RELOC_TILEGX_IMM8_X1:
 -- BFD_RELOC_TILEGX_IMM8_Y1:
 -- BFD_RELOC_TILEGX_DEST_IMM8_X1:
 -- BFD_RELOC_TILEGX_MT_IMM14_X1:
 -- BFD_RELOC_TILEGX_MF_IMM14_X1:
 -- BFD_RELOC_TILEGX_MMSTART_X0:
 -- BFD_RELOC_TILEGX_MMEND_X0:
 -- BFD_RELOC_TILEGX_SHAMT_X0:
 -- BFD_RELOC_TILEGX_SHAMT_X1:
 -- BFD_RELOC_TILEGX_SHAMT_Y0:
 -- BFD_RELOC_TILEGX_SHAMT_Y1:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW2:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW2:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW3:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW3:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE:
 -- BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE:
 -- BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE:
 -- BFD_RELOC_TILEGX_TLS_DTPMOD64:
 -- BFD_RELOC_TILEGX_TLS_DTPOFF64:
 -- BFD_RELOC_TILEGX_TLS_TPOFF64:
 -- BFD_RELOC_TILEGX_TLS_DTPMOD32:
 -- BFD_RELOC_TILEGX_TLS_DTPOFF32:
 -- BFD_RELOC_TILEGX_TLS_TPOFF32:
 -- BFD_RELOC_TILEGX_TLS_GD_CALL:
 -- BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD:
 -- BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD:
 -- BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD:
 -- BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD:
 -- BFD_RELOC_TILEGX_TLS_IE_LOAD:
 -- BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD:
 -- BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD:
 -- BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD:
 -- BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD:
     Tilera TILE-Gx Relocations.

 -- BFD_RELOC_BPF_64:
 -- BFD_RELOC_BPF_32:
 -- BFD_RELOC_BPF_16:
 -- BFD_RELOC_BPF_DISP16:
 -- BFD_RELOC_BPF_DISP32:
     Linux eBPF relocations.

 -- BFD_RELOC_EPIPHANY_SIMM8:
     Adapteva EPIPHANY - 8 bit signed pc-relative displacement

 -- BFD_RELOC_EPIPHANY_SIMM24:
     Adapteva EPIPHANY - 24 bit signed pc-relative displacement

 -- BFD_RELOC_EPIPHANY_HIGH:
     Adapteva EPIPHANY - 16 most-significant bits of absolute address

 -- BFD_RELOC_EPIPHANY_LOW:
     Adapteva EPIPHANY - 16 least-significant bits of absolute address

 -- BFD_RELOC_EPIPHANY_SIMM11:
     Adapteva EPIPHANY - 11 bit signed number - add/sub immediate

 -- BFD_RELOC_EPIPHANY_IMM11:
     Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)

 -- BFD_RELOC_EPIPHANY_IMM8:
     Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.

 -- BFD_RELOC_VISIUM_HI16:
 -- BFD_RELOC_VISIUM_LO16:
 -- BFD_RELOC_VISIUM_IM16:
 -- BFD_RELOC_VISIUM_REL16:
 -- BFD_RELOC_VISIUM_HI16_PCREL:
 -- BFD_RELOC_VISIUM_LO16_PCREL:
 -- BFD_RELOC_VISIUM_IM16_PCREL:
     Visium Relocations.

 -- BFD_RELOC_WASM32_LEB128:
 -- BFD_RELOC_WASM32_LEB128_GOT:
 -- BFD_RELOC_WASM32_LEB128_GOT_CODE:
 -- BFD_RELOC_WASM32_LEB128_PLT:
 -- BFD_RELOC_WASM32_PLT_INDEX:
 -- BFD_RELOC_WASM32_ABS32_CODE:
 -- BFD_RELOC_WASM32_COPY:
 -- BFD_RELOC_WASM32_CODE_POINTER:
 -- BFD_RELOC_WASM32_INDEX:
 -- BFD_RELOC_WASM32_PLT_SIG:
     WebAssembly relocations.

 -- BFD_RELOC_CKCORE_NONE:
 -- BFD_RELOC_CKCORE_ADDR32:
 -- BFD_RELOC_CKCORE_PCREL_IMM8BY4:
 -- BFD_RELOC_CKCORE_PCREL_IMM11BY2:
 -- BFD_RELOC_CKCORE_PCREL_IMM4BY2:
 -- BFD_RELOC_CKCORE_PCREL32:
 -- BFD_RELOC_CKCORE_PCREL_JSR_IMM11BY2:
 -- BFD_RELOC_CKCORE_GNU_VTINHERIT:
 -- BFD_RELOC_CKCORE_GNU_VTENTRY:
 -- BFD_RELOC_CKCORE_RELATIVE:
 -- BFD_RELOC_CKCORE_COPY:
 -- BFD_RELOC_CKCORE_GLOB_DAT:
 -- BFD_RELOC_CKCORE_JUMP_SLOT:
 -- BFD_RELOC_CKCORE_GOTOFF:
 -- BFD_RELOC_CKCORE_GOTPC:
 -- BFD_RELOC_CKCORE_GOT32:
 -- BFD_RELOC_CKCORE_PLT32:
 -- BFD_RELOC_CKCORE_ADDRGOT:
 -- BFD_RELOC_CKCORE_ADDRPLT:
 -- BFD_RELOC_CKCORE_PCREL_IMM26BY2:
 -- BFD_RELOC_CKCORE_PCREL_IMM16BY2:
 -- BFD_RELOC_CKCORE_PCREL_IMM16BY4:
 -- BFD_RELOC_CKCORE_PCREL_IMM10BY2:
 -- BFD_RELOC_CKCORE_PCREL_IMM10BY4:
 -- BFD_RELOC_CKCORE_ADDR_HI16:
 -- BFD_RELOC_CKCORE_ADDR_LO16:
 -- BFD_RELOC_CKCORE_GOTPC_HI16:
 -- BFD_RELOC_CKCORE_GOTPC_LO16:
 -- BFD_RELOC_CKCORE_GOTOFF_HI16:
 -- BFD_RELOC_CKCORE_GOTOFF_LO16:
 -- BFD_RELOC_CKCORE_GOT12:
 -- BFD_RELOC_CKCORE_GOT_HI16:
 -- BFD_RELOC_CKCORE_GOT_LO16:
 -- BFD_RELOC_CKCORE_PLT12:
 -- BFD_RELOC_CKCORE_PLT_HI16:
 -- BFD_RELOC_CKCORE_PLT_LO16:
 -- BFD_RELOC_CKCORE_ADDRGOT_HI16:
 -- BFD_RELOC_CKCORE_ADDRGOT_LO16:
 -- BFD_RELOC_CKCORE_ADDRPLT_HI16:
 -- BFD_RELOC_CKCORE_ADDRPLT_LO16:
 -- BFD_RELOC_CKCORE_PCREL_JSR_IMM26BY2:
 -- BFD_RELOC_CKCORE_TOFFSET_LO16:
 -- BFD_RELOC_CKCORE_DOFFSET_LO16:
 -- BFD_RELOC_CKCORE_PCREL_IMM18BY2:
 -- BFD_RELOC_CKCORE_DOFFSET_IMM18:
 -- BFD_RELOC_CKCORE_DOFFSET_IMM18BY2:
 -- BFD_RELOC_CKCORE_DOFFSET_IMM18BY4:
 -- BFD_RELOC_CKCORE_GOTOFF_IMM18:
 -- BFD_RELOC_CKCORE_GOT_IMM18BY4:
 -- BFD_RELOC_CKCORE_PLT_IMM18BY4:
 -- BFD_RELOC_CKCORE_PCREL_IMM7BY4:
 -- BFD_RELOC_CKCORE_TLS_LE32:
 -- BFD_RELOC_CKCORE_TLS_IE32:
 -- BFD_RELOC_CKCORE_TLS_GD32:
 -- BFD_RELOC_CKCORE_TLS_LDM32:
 -- BFD_RELOC_CKCORE_TLS_LDO32:
 -- BFD_RELOC_CKCORE_TLS_DTPMOD32:
 -- BFD_RELOC_CKCORE_TLS_DTPOFF32:
 -- BFD_RELOC_CKCORE_TLS_TPOFF32:
 -- BFD_RELOC_CKCORE_PCREL_FLRW_IMM8BY4:
 -- BFD_RELOC_CKCORE_NOJSRI:
 -- BFD_RELOC_CKCORE_CALLGRAPH:
 -- BFD_RELOC_CKCORE_IRELATIVE:
 -- BFD_RELOC_CKCORE_PCREL_BLOOP_IMM4BY4:
 -- BFD_RELOC_CKCORE_PCREL_BLOOP_IMM12BY4:
     C-SKY relocations.

 -- BFD_RELOC_S12Z_OPR:
     S12Z relocations.

     typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;

bfd_reloc_type_lookup
.....................

Synopsis

     reloc_howto_type *bfd_reloc_type_lookup
        (bfd *abfd, bfd_reloc_code_real_type code);
     reloc_howto_type *bfd_reloc_name_lookup
        (bfd *abfd, const char *reloc_name);

Description

Return a pointer to a howto structure which, when invoked, will perform the relocation CODE on data from the architecture noted.

bfd_default_reloc_type_lookup
.............................

Synopsis

     reloc_howto_type *bfd_default_reloc_type_lookup
        (bfd *abfd, bfd_reloc_code_real_type  code);

Description

Provides a default relocation lookup routine for any architecture.

bfd_get_reloc_code_name
.......................

Synopsis

     const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);

Description

Provides a printable name for the supplied relocation code. Useful mainly for printing error messages.

bfd_generic_relax_section
.........................

Synopsis

     bool bfd_generic_relax_section
        (bfd *abfd,
         asection *section,
         struct bfd_link_info *,
         bool *);

Description

Provides default handling for relaxing for back ends which don't do relaxing.

bfd_generic_gc_sections
.......................

Synopsis

     bool bfd_generic_gc_sections
        (bfd *, struct bfd_link_info *);

Description

Provides default handling for relaxing for back ends which don't do section gc -- i.e., does nothing.

bfd_generic_lookup_section_flags
................................

Synopsis

     bool bfd_generic_lookup_section_flags
        (struct bfd_link_info *, struct flag_info *, asection *);

Description

Provides default handling for section flags lookup -- i.e., does nothing. Returns FALSE if the section should be omitted, otherwise TRUE.

bfd_generic_merge_sections
..........................

Synopsis

     bool bfd_generic_merge_sections
        (bfd *, struct bfd_link_info *);

Description

Provides default handling for SEC_MERGE section merging for back ends which don't have SEC_MERGE support -- i.e., does nothing.

bfd_generic_get_relocated_section_contents
..........................................

Synopsis

     bfd_byte *bfd_generic_get_relocated_section_contents
        (bfd *abfd,
         struct bfd_link_info *link_info,
         struct bfd_link_order *link_order,
         bfd_byte *data,
         bool relocatable,
         asymbol **symbols);

Description

Provides default handling of relocation effort for back ends which can't be bothered to do it efficiently.

_bfd_generic_set_reloc
......................

Synopsis

     void _bfd_generic_set_reloc
        (bfd *abfd,
         sec_ptr section,
         arelent **relptr,
         unsigned int count);

Description

Installs a new set of internal relocations in SECTION.

_bfd_unrecognized_reloc
.......................

Synopsis

     bool _bfd_unrecognized_reloc
        (bfd * abfd,
         sec_ptr section,
         unsigned int r_type);

Description

Reports an unrecognized reloc. Written as a function in order to reduce code duplication. Returns FALSE so that it can be called from a return statement.